Alpine Install: from a disc to PC Engines APU

From Alpine Linux
Jump to: navigation, search

Overall description: Alpine Installation from a official image tar file downloaded to a real second generation PC Engines APU systems (apu2, apu3, apu4), where will be single OS only.

This document will guide you to install Alpine into second generation PC Engines APU systems, it were tested with an apu2d4 and Alpine 3.11.6.. For others ways to install see at the Alpine_newbie_install_manual

Terminology

  • BIOS: it's a system into computer hardware machine laptop or desktops, embebed that will manage the early boot process, see more in the Alpine and UEFI page.
  • New machine: will be your real machine fresh and ready to install your new Alpine operating system, with a installed ISO image where to put the downloaded media installation.
  • Bootable USB: will be your hardware drive input to put the image downloaded iso media with the operating system Alpine to install as source media; this drive are commonly named USB unit.
  • Serial console: is an iput port t the device.. DB9 serial port for serial console, located at the board to use as char device, its common in those devices.
  • Source media: will be the just burned/ disc from the downloaded iso file of Alpine operating system. Will be Attach to the serial console to property boot the source disc as media installation.
  • Target media: will be the storage medium device into the new computer target where the Alpine files for operating system will be installed, its one partition from the HardDisk of the new computer.

Booting the Alpine ISO disc

  1. It's probably a good idea to ensure that the BIOS / Firmware is up to date.
  2. Create_a_Bootable_USB thumb drive with the current standard x86_64 image from the downloads page.
  3. Attach to the serial console. Configure your terminal emulator for 115200 8n1.
  4. Power on the APU.
  5. When BIOS prompted, hit F10 and select to boot from USB.
  6. At the boot prompt, quickly type a slash to interrupt the default boot, which has a short timeout.
  7. Continue entering the remainder of this command at your leisure. It should have only one slash at the start, to be clear: /boot/vmlinuz-lts modules=loop,squashfs,sd-mod,usb-storage nomodeset console=ttyS0,115200 initrd=/boot/initramfs-lts
  8. Alpine should come up as normal.

The setup install for normal process

After boot up.. a command line shell of a complete ready to use Alpine will show you.

Tango-dialog-warning.png
Warning: This process ONLY WORK with "EXTENDED" ISO or recent versions of "STANDARD" ISO image downloads.


Login prompt as root

At the login: to appear, type root and press enter, no password will be asked if run from image boot.

Installation-alpine-alpine-setup-3-root-login.png

Running setup alpine script

Run the setup-alpine script as show in the image:

Installation-alpine-alpine-setup-4-setup-scripts.png
Select keyboard layout

Choose your keyboard layout. If you don't know your keyboard layout choose us. By example for most Latin American a es are enough, for Russian (an maybe Cirilyc ones) ru are enough.

Installation-alpine-alpine-setup-4-setup-scripts-1-languaje-1.png

Select keyboard variant

Choose your keyboard variant. If you don't know your keyboard variant choose default from list. By example for most Latin American must use es-winkeys are enough.

Installation-alpine-alpine-setup-4-setup-scripts-1-languaje-2.png

Enter system hostname

Host name, which will be the name of your computer; using localhost are enough and recommended for testing purposes cos permits apply mostly how to's and tutorials of the wiki pages.

Installation-alpine-alpine-setup-5-setup-scripts-hostname.png

Initialize network cards

Choose your network card, most people can just go with the default (just press enter), a second question will raised about any other configuration, just type "no" and then press enter to bypass the step to property setup after installation finished property.

Installation-alpine-alpine-setup-6-setup-scripts-networking.png

IMPORTANT NOTE: mostly in x86 and x64 ISO images we can let configurations for later, cos at the most modern the network card, the lest supported or still not well tested. Just type done and press enter.. if you made some wired configuration later another question will raised, will use dhcp? Most people will use DHCP, so press enter again, if you have Internet connection from ISP most settings are just DHCP so all will be configured automatically.

Initialize network DNS

The DNS will be automatically detected, if not will ask for, just type for domain "" (empty) then press enter, later and 8.8.8.8 as picture show and then press enter to next question:

Installation-alpine-alpine-setup-7-setup-scripts-dns.png

Changing password for root

Next a root password must be defined, twice for confirmation as picture shows, if are too short will said as a warning "bad" but nothing wrong.. just retype and go. Take note that when typed no chars will be show, all will be invisible when type the password.

Installation-alpine-alpine-setup-8-setup-scripts-root-password.png

Witch timezone to choose?

Select a timezone, just press enter to use UTC when perform a single installation.

Installation-alpine-alpine-setup-9-setup-scripts-timezone.png

Proxy chooser

Then setup script will ask for proxy chooser.. just type none and then press enter

Installation-alpine-alpine-setup-9-setup-scripts-proxy.png

Enter mirror number

Then setup script will ask for repository mirror chooser.. just type done and then press enter, this will be configure many times later during usage of the system. Almost any tutorial of newbie pages will explain detailed so lest bypass using "done".

Installation-alpine-alpine-setup-9-setup-scripts-repository-mirror.png

Witch ssh server?

Choose an SSH server allows you to remotely manage your machine. OpenSSH is what the big distro's use, Dropbear is a tiny SSH replacement. Recommended to type openssh and then press enter, cos you able to connect using command line from Unix-like systems also is the offline available in all alpine installer images. Installation-alpine-alpine-setup-9-setup-scripts-ssh.png

Witch NTP client to run?

This is for time sync, just press enter to use the image offline available can be changed at post install.

Installation-alpine-alpine-setup-9-setup-scripts-time-ntp.png

Witch disk choose to use?

To choose the disk destination ..

How would be used?

Then choose type of installation .. those are described at Setup modes section at Alpine setup scripts wiki page. "sys" mode is the familiar install to disk well knowed for usage as main OS to computers.

After all a confirmation question will raised, type "y" if everything are ok and the setup will proceed to erase, format and copy the files to the destination disk choose!

After reboot

  1. Before rebooting, edit /boot/extlinux.conf.
    1. Add SERIAL 0 115200 as the first line in the file.
    2. In the APPEND line, replace quiet with console=ttyS0,115200
  2. Remove the thumb drive.
  3. Cross your fingers and reboot. The system should boot properly with console on serial.
  4. Edit /etc/update-extlinux.conf so that if extlinux.conf is regenerated it will retain these settings:
    1. Update the line with serial_port to read serial_port=0
    2. Update the serial_baud line to read serial_baud=115200
    3. Update the default_kernel_opts line to replace quiet with console=ttyS0,115200
  5. Run update-extlinux
  6. Examine /boot/extlinux.conf.
    1. Make sure it looks OK. Compare with /boot/extlinux.conf-old.
    2. If something looks wrong, mv /boot/extlinux.conf-old /boot/extlinux.conf to roll back the changes and try to figure out what went wrong
  7. Cross your fingers and reboot. The system should boot properly with console on serial.

Documents series

Previous required What's next to read
Alpine newbie install manual Alpine newbie apk packages

See Also

  1. Newbie_Alpine_Ecosystem
  2. Alpine and UEFI
  3. Alpine newbie apk packages
  4. Alpine newbie desktops
  5. Alpine newbie developer
  6. Alpine newbie lammers

es:Alpine Instalar: de un disco a una nueva computadora arrancar un solo sistema