Alpine local backup: Difference between revisions

From Alpine Linux
(intro)
Line 1: Line 1:
When Alpine Linux boots in diskless mode, Alpine itself only loads a few required packages by default. But local adjustments in RAM are possible (e.g. by [[Alpine_package_management|installing a package]] or adjusting some configuration). However, to make any modification and adjustment survive a reboot, they need to be saved to a file.
When Alpine Linux boots in diskless mode, initially it only loads a few required packages from the boot device by default.
But local adjustments in RAM are possible, e.g. by [[Alpine_package_management|installing a package]] or adjusting some configuration.


This is where the local backup utility <code>lbu</code> comes in!
And all the modifications can be saved to an overlay file (.apkovl) to make them survive a reboot.
This is what the local backup utility <code>lbu</code> is good for!


__TOC__
__TOC__

Revision as of 18:33, 9 May 2020

When Alpine Linux boots in diskless mode, initially it only loads a few required packages from the boot device by default. But local adjustments in RAM are possible, e.g. by installing a package or adjusting some configuration.

And all the modifications can be saved to an overlay file (.apkovl) to make them survive a reboot. This is what the local backup utility lbu is good for!

Note: If you installed Alpine on HDD you don't need to use lbu, because in this case all modifications are directly written to HDD. However, lbu may still be useful for some maintenance tasks.

The first thing you need to know is this: By default lbu only cares about modifications in /etc and its subfolders, with the exception of /etc/init.d!
Please have a look at lbu include to save files/folders located elsewhere than in /etc.

Alpine has the following tools for permanently storing your modifications:

  • lbu
  • lbu commit (Same as 'lbu ci')
  • lbu package (Same as 'lbu pkg')
  • lbu status (Same as 'lbu st')
  • lbu list (Same as 'lbu ls')
  • lbu diff
  • lbu include (Same as 'lbu inc' or 'lbu add')
  • lbu exclude (Same as 'lbu ex' or 'lbu delete')
  • lbu list-backup (Same as 'lbu lb')
  • lbu revert

In the below examples you will find some characters with special meaning:

  • | = or ('lbu commit|ci' means that you can type ether 'lbu commit' or 'lbu ci')
  • [ ] = optional (In 'lbu commit|ci [-nv]' you can just skip the '-n', '-v' or '-nv' part if you don't want it)

Committing your changes

Basic Command

When you "commit" or save changes you've made to your system, lbu will generate a file named something like myboxname.apkovl.tar.gz ('myboxname' will be the same as the hostname). This file (that contains your modifications) is called your "apkovl". You will need to save your apkovl on some suitable media (floppy, usb, cf, other).

usage: lbu commit|ci [-nv] [<media>]

Options:
  -d	Remove old apk overlay files.
  -e	Protect configuration with a password.
  -n	Don't commit, just show what would have been committed.
  -p <password>	Give encryption password on the command-line
  -v	Verbose mode.

The following values for <media> is supported: floppy usb
If <media> is not specified, the environment variable LBU_MEDIA will be used.

Password protection will use aes-256-cbc encryption. Other ciphers can be
used by setting the DEFAULT_CIPHER or ENCRYPTION environment variables.
For possible ciphers, try: openssl -v

The password used to encrypt the file, can either be specified with the -p
option or using the PASSWORD environment variable.

The environment variables can also be set in /etc/lbu/lbu.conf

Commiting and loading ISO image customizations

The "diskless" Alpine ISO images seem to look for an .apkovl volume in system partitions, and offer to save local backups and package cache to mountpoints below /media/. (Besides supporting a boot parameter that points to a web server.)

So

  1. Boot the diskless system from ISO, and if necessary create and format a partition.
  2. Edit /etc/fstab and mount the writable partition below /media/.
  3. Run alpine-setup and choose to save the state to the mounted partition.
  4. Customize the system.
  5. Generate an APKOVL file with lbu by executing lbu commit

See example at Qemu that shows how an ISO image with .apkovl customizations is booted in a virtual machine.


Notes:

  • See Alpine_Linux_package_management#Local_Cache about managing included packages.
  • See lbu about how to customize it to cover files outside of /etc.
  • Any packages you add to /etc/apk/world of your lbu will also automatically be installed in the live system.
  • If you don't have a web server you can run busybox's httpd temporarily - busybox httpd -p 127.0.0.1:80
  • If you put the APKOVL file on a webserver, you will need to supply a custom url with the APKOVL kernel boot parameter.

Create a apkovl elsewhere than on your configured media

To "commit" changes, but overriding the destination of the generated apkovl file, use lbu package instead of lbu commit:

usage: lbu package|pkg -v [<dirname>|<filename>]

Options:
  -v   Verbose mode.

If <dirname> is a directory, a package named <hostname>.apkovl.tar.gz will
be created in the specified directory.

If <filename> is specified, and is not a directory, a package with the
specified name will be created.

If neither <dirname> nor <filename> is specified, a package named
<hostname>.apkovl.tar.gz will be created in current work directory.

Use SSH to create an apkovl on a different host

To create an apkovl of client on a centralized server, use lbu package with - as the apkovl name:

On the server:

ssh root@client "lbu package -" >client.apkovl.tar.gz

Check what will be added to your apkovl

lbu status lists what will be saved the next time you run lbu commit. Its default output is incremental, that is, to only show what files have changed since the last commit; but this can be overridden with the -a flag:

usage: lbu status|st [-av]

Options:
  -a    Compare all files, not just since last commit.
  -v    Also show include and exclude lists.

Another option is lbu list. This works like lbu status -a but the format of the output is a bit different. (It's strictly equivalent to lbu package -v /dev/null).

usage: lbu list|ls

A third option is lbu diff. This shows the same incremental changes that lbu status (without -a) does, but in a different format.

 usage: lbu diff


Include special files/folders to the apkovl

Assume that you have some files that you want to permanently save, but they are located somewhere else than in /etc.
It could be /root/.ssh/authorized_keys (used by sshd to authenticate ssh-users). Such files/folders can be added to lbu's include list with the following command:

usage: lbu include|inc|add [-rv] <file> ...
       lbu include|inc|add [-v] -l

Options:
  -l	List contents of include list.
  -r	Remove specified file(s) from include list instead of adding.
  -v	Verbose mode.
Note: This information used to be maintained in /etc/lbu/include; now it's instead maintained together with the exclude list in /etc/apk/protected_paths.d/lbu.list. Either way, the command lbu include only modifies lbu's configuration; you will need to run lbu commit to actually create/modify your apkovl.


Exclude specific files/folders from the apkovl

Assume that you have some files located in /etc or one of its subfolders that you do not want to permanently save. It could be some log file or status file that for some reason isn't in /var/log/ but in some location that would otherwise be tracked by lbu. Such files/folders can be added to lbu's exclude list by manually editing that file or using the following command:

usage: lbu exclude|ex|delete [-rv] <file> ...
       lbu exclude|ex|delete [-v] -l

Options:
  -l	List contents of exclude list.
  -r	Remove specified file(s) from exclude list instead of adding.
  -v	Verbose mode.
Note: As stated above, this information is now maintained in /etc/apk/protected_paths.d/lbu.list. The command lbu exclude also only modifies lbu's configuration; you will need to run lbu commit to actually create/modify your apkovl.


Execute a script as part of a backup

Sometimes it is necessary to run a script before or after a backup. Scripts in two optional directories allow for this:

/etc/lbu/pre-package.d
/etc/lbu/post-package.d

Files in those directories are run using run-script rules (meaning they must have the executable bit set, they are run in alphabetical order, and cannot contain an extension: runme works, but runme.sh does not.)

The scripts in pre-package.d are run before the apkovl is created; scripts in post-package.d are run after the apkovl is created.

Example

Rather than adding the raw database directories to /etc/lbu/include, you can do a "database dump". For purposes of example, we use postgresql:

  • Create /etc/lbu/pre-package.d/sqldump with the following contents:
    pg_dumpall -U postgres | gzip -c >/root/pgdatabases.gz
  • Mark the file executable: chmod +x /etc/lbu/pre-package.d/sqldump
  • Create /etc/lbu/post-package.d/sqldumpdelete with the following contents:
    rm -f /root/pgdatabases.gz
  • Mark the file executable: chmod +x /etc/lbu/post-package.d/sqldumpdelete
  • Finally, add the database dump file to the list of files to back up: lbu include root/pgdatabases.gz

Now whenever you do a lbu commit, the sql databases are dumped and gzipped to /root/pgdatabases.gz, and then the temporary file is deleted at the end of the lbu commit.

On a catastrophic restore, the databases are not automatically restored (that's not lbu's responsibility), but you will find a complete database dump in the /root directory, where it can be restored manually.


Multiple Backups

Lbu can now keep backups so you can revert to older, good known config. Set BACKUP_LIMIT in /etc/lbu/lbu.conf to the number of backups you want to keep.

You can list the current backups with:

lbu list-backup [<media>]

and you can revert to an older with:

lbu revert <filename> [<media>]

Nothing is written to your main system when "reverting"; this only affects which apkovl is considered active. If you've set BACKUP_LIMIT, then the previously active apkovl will be backed up before being overwritten.

See also