Alpine Linux:Overview: Difference between revisions
(wording for clarity) |
Prabuanand (talk | contribs) m (creating busybox webpage using link) |
||
| (11 intermediate revisions by 8 users not shown) | |||
| Line 1: | Line 1: | ||
Alpine uses [ | Alpine uses [https://musl.libc.org/ musl] as its libc, and [[BusyBox]] as core utilities. These choices tend to make Alpine especially minimalist and secure. | ||
== General overview == | == General overview == | ||
| Line 5: | Line 5: | ||
Alpine Linux has one of the '''fastest boot times''' of any operating system. | Alpine Linux has one of the '''fastest boot times''' of any operating system. | ||
It's famous because of its small size and it's '''heavily used in containers'''. | |||
It's also well known for '''wide use in embedded devices''' and as a '''base system for many enterprise routers'''. | |||
The postmarketOS project which is designed to run on mobile devices is based on Alpine Linux. | The postmarketOS project, which is designed to run on mobile devices, is based on Alpine Linux. | ||
=== Distinctive === | === Distinctive === | ||
Alpine Linux follows the principles of '''the SSS distro: Simple+Small+Secure''': due to usage of [ | Alpine Linux follows the principles of '''the SSS distro: Simple+Small+Secure''': due to usage of [https://musl.libc.org/ muslc] as the minimalist libc, BusyBox simple coreutils (with possibilities to alternate on inflated original packages of each coreutils tools also) and userland binaries compiled as Position Independent Executables (PIE) with stack smashing protection. | ||
=== Efficient === | === Efficient === | ||
| Line 19: | Line 19: | ||
Some main reasons: | Some main reasons: | ||
# Usage of [ | # Usage of [https://musl.libc.org/ musl] as the minimalist libc | ||
# Its own package manager called | # Its own package manager called [[Alpine Package Keeper|apk]], | ||
# | # The {{Pkg|openrc}} init system, script driven set-ups and that’s it! | ||
# {{Pkg|busybox}} simple coreutils (with possibilities to alternate on inflated original packages of each coreutils tools also) | # {{Pkg|busybox}}: simple coreutils (with possibilities to alternate on inflated original packages of each coreutils tools also) | ||
This provides you with a simple, '''crystal-clear Linux environment without all the noise''', nothing else will get in the way. | This provides you with a simple, '''crystal-clear Linux environment without all the noise''', nothing else will get in the way. | ||
| Line 33: | Line 33: | ||
<ol> | <ol> | ||
<li>'''Architectures''' | |||
<p>Alpine uses '''Linux''' as OS kernel, and | <p>Alpine uses '''Linux''' as [https://www.kernel.org/ OS kernel], and has a focus on '''SSS distribution, Simple Small and Secure'''</p> | ||
<p>A variety of architectures are officially | <p>A variety of architectures are officially supported: | ||
* '''x86_64''': The popular AMD64 compatible 64-bit x86 based machines, i386 are not recommended for newer/ | * '''x86_64''': The popular AMD64 compatible 64-bit x86 based machines, i386 are not recommended for newer/latest hardware. | ||
* '''x86''': (i386 pc 32bit) and x86_64 (i686 pc 64bit and amd64) | * '''x86''': (i386 pc 32bit) and x86_64 (i686 pc 64bit and amd64) | ||
* '''armhf''': The newer ARM hard-float for newer, more powerful 32-bit devices alongside 64-bit | * '''armhf''': The newer ARM hard-float for newer, more powerful 32-bit devices alongside 64-bit | ||
| Line 45: | Line 45: | ||
* '''ppc64le''': For 64-bit PowerPC devices with pure little-endian mode, mostly for POWER8 and POWER9. | * '''ppc64le''': For 64-bit PowerPC devices with pure little-endian mode, mostly for POWER8 and POWER9. | ||
* '''s390x''': For IBM Z mainframes, especially IBM Z and IBM LinuxONE. | * '''s390x''': For IBM Z mainframes, especially IBM Z and IBM LinuxONE. | ||
</li><li>'''The installation''' | </li><li>'''Installing''' | ||
<p>Alpine can be installed to a hard disk/SSD/other storage medium like any other distro (this is called '''sys mode'''). The storage medium in question can be any block device (USB, Flash, SDD, HDD). It can be removable, so long as you can configure your machine to boot from it. But if you're working with removable media, you might prefer one of the other installation modes.</p> | |||
<p>In each of these modes, you boot your machine from a static image. You will also need a writable medium to save updates to the system. In '''diskless mode''', that medium is usually a small USB key (or a partition on one) that holds the changes you want to persist. Both the base Alpine system and all your changes will be unpacked into a memory-based filesystem.</p> | |||
<p>The other, '''data''' mode is for when you're dealing with a large amount of persisting data, that you want to keep on a hard disk/SSD/other storage medium, rather than unpacking into memory. The default setup here is to store your {{Path|/var}} partition directly on the hard storage medium. But as in the '''diskless''' mode, your root system still comes from a static ISO image.</p> | |||
<p>These second and third installation modes are sometimes referred to, collectively, as "run-from-RAM" installations.</p> | |||
<p>Key to these installation modes is Alpine's [[Alpine local backup|lbu]] utility. This tracks which files you've modified from their static ISO version, and want the changes to persist. The lbu utility saves those changes in {{Path|.apkovl}} "overlay" files. (These are essentially tar-gzip archives, though they can also be encrypted. You can use the lbu utility with the '''sys''' mode, too, if you like: as a form of backup, or to configure overlay files for other systems. But for a robust incremental backup system, you'll probably want a more specialized tool, such as {{Pkg|rsnapshot}}.)</p> | |||
<p>The lbu utility is part of the {{Pkg|alpine-conf}} package, which is required by {{Pkg|alpine-base}}.</p> | |||
<p> | <p>'''Alpine's installer''' consists of '''the {{Path|/sbin/setup-*}} scripts''', which are also part of the {{Pkg|alpine-conf}} package. | ||
</p><p>'''A base Alpine install will include only needed packages''' such like {{Pkg|alpine-base}}, {{Pkg|syslinux}}, {{Pkg|linux-lts}} (or another kernel package), and depending | </p><p>'''A base Alpine install will include only needed packages''' such like {{Pkg|alpine-base}}, {{Pkg|syslinux}}, {{Pkg|linux-lts}} (or another kernel package), and depending on your purposes packages like {{Pkg|openssh}} and/or {{Pkg|chrony}}. | ||
</p><p>Alpine's boot loader case | </p><p>Alpine's boot loader in that case is {{Pkg|syslinux}}, or its companions <code>isolinux</code> or <code>extlinux</code>. The latest releases also have Grub and [[Alpine and UEFI|UEFI support]].</p> | ||
</li><li>'''The init system''' | </li><li>'''The init system''' | ||
<p>An "init system" includes several different components. First, there is the initramfs loaded by the bootloader. Alpine's tool for generating | <p>An "init system" includes several different components. First, there is the initramfs, which is loaded by the bootloader. Alpine's tool for generating the initramfs is {{Path|/sbin/mkinitfs}}, part of the {{Pkg|mkinitfs}} package, which is required by Alpine's kernel packages and by its {{Pkg|syslinux}} package. This tool's settings are read from {{Path|/etc/mkinitfs/*}}, and it installs the initscript {{Path|/usr/share/mkinitfs/initramfs-init}} into the initramfs. | ||
</p><p>Second, Alpine uses [[Alpine Linux Init System|OpenRC]] to handle the rest of its initscripts. The base framework of this is in the {{Pkg|openrc}} package, which is required by {{Pkg|alpine-conf}}. | </p><p>Second, Alpine uses [[Alpine Linux Init System|OpenRC]] to handle the rest of its initscripts. The base framework of this is in the {{Pkg|openrc}} package, which is required by {{Pkg|alpine-conf}}. | ||
| Line 69: | Line 79: | ||
<p>The last important distinguishing feature of a Linux distro is its packaging and development systems. | <p>The last important distinguishing feature of a Linux distro is its packaging and development systems. | ||
</p><p>In Alpine's case, these are something a hybrid between [https://www.archlinux.org/ ArchLinux]'s, on the one hand, and [ | </p><p>In Alpine's case, these are something a hybrid between [https://www.archlinux.org/ ArchLinux]'s, on the one hand, and [https://www.gentoo.org/ Gentoo] and [https://www.freebsd.org/ FreeBSD]'s, on the other. Our package-management and build utilities work much like Arch's: | ||
* {{Pkg|mkinitfs}}, mentioned above, rebuilds Alpine's initramfs, like Arch's "mkinitcpio" | * {{Pkg|mkinitfs}}, mentioned above, rebuilds Alpine's initramfs, like Arch's "mkinitcpio" | ||
| Line 76: | Line 86: | ||
* Alpine's package-building scripts are named APKBUILD, like Arch's "PKGBUILD" | * Alpine's package-building scripts are named APKBUILD, like Arch's "PKGBUILD" | ||
</p><p>What Alpine borrows from Gentoo and FreeBSD is a tree of all the package-building scripts. | </p><p>What Alpine borrows from Gentoo and FreeBSD is a tree of all the package-building scripts. It is called the [[Aports tree]], and is kept as a single git repository. (Compare Gentoo's "Portage" and FreeBSD's "ports". Something similar can be set up with Arch's "abs", but it's not as tightly integrated with their package manager and build utilities.) | ||
</p><p>If you're only planning to install packages on a given system, and not do any development there, then the only pieces of this you'll need are {{Pkg|mkinitfs}} and {{Pkg|apk-tools}}, both included in a base Alpine install. If you do plan to do development, install {{Pkg|alpine-sdk}}, which includes gcc, git, abuild, and the like, and see [[Developer Documentation]]. | </p><p>If you're only planning to install packages on a given system, and not do any development there, then the only pieces of this you'll need are {{Pkg|mkinitfs}} and {{Pkg|apk-tools}}, both included in a base Alpine install. If you do plan to do development, install {{Pkg|alpine-sdk}}, which includes gcc, git, abuild, and the like, and see [[Developer Documentation]]. | ||
| Line 86: | Line 96: | ||
* [[Comparison with other distros]] | * [[Comparison with other distros]] | ||
* [[ | * [[Tutorials and Howtos]] | ||
* [https://en.wikipedia.org/wiki/BusyBox BusyBox] | |||
[[Category:Installation]] | |||
Latest revision as of 13:31, 21 October 2024
Alpine uses musl as its libc, and BusyBox as core utilities. These choices tend to make Alpine especially minimalist and secure.
General overview
Alpine Linux has one of the fastest boot times of any operating system.
It's famous because of its small size and it's heavily used in containers.
It's also well known for wide use in embedded devices and as a base system for many enterprise routers.
The postmarketOS project, which is designed to run on mobile devices, is based on Alpine Linux.
Distinctive
Alpine Linux follows the principles of the SSS distro: Simple+Small+Secure: due to usage of muslc as the minimalist libc, BusyBox simple coreutils (with possibilities to alternate on inflated original packages of each coreutils tools also) and userland binaries compiled as Position Independent Executables (PIE) with stack smashing protection.
Efficient
Some main reasons:
- Usage of musl as the minimalist libc
- Its own package manager called apk,
- The openrc init system, script driven set-ups and that’s it!
- busybox: simple coreutils (with possibilities to alternate on inflated original packages of each coreutils tools also)
This provides you with a simple, crystal-clear Linux environment without all the noise, nothing else will get in the way.
Secure
All userland binaries are compiled as Position Independent Executables (PIE) with stack smashing protection.
Technical overview
- Architectures
Alpine uses Linux as OS kernel, and has a focus on SSS distribution, Simple Small and Secure
A variety of architectures are officially supported:
- x86_64: The popular AMD64 compatible 64-bit x86 based machines, i386 are not recommended for newer/latest hardware.
- x86: (i386 pc 32bit) and x86_64 (i686 pc 64bit and amd64)
- armhf: The newer ARM hard-float for newer, more powerful 32-bit devices alongside 64-bit
- armv7: The 32-bit ARM only execution state of the ARMv7 devices machines.
- aarch64: The 64-bit ARM only execution state of the ARMv8 device machines.
- ppc64le: For 64-bit PowerPC devices with pure little-endian mode, mostly for POWER8 and POWER9.
- s390x: For IBM Z mainframes, especially IBM Z and IBM LinuxONE.
- Installing
Alpine can be installed to a hard disk/SSD/other storage medium like any other distro (this is called sys mode). The storage medium in question can be any block device (USB, Flash, SDD, HDD). It can be removable, so long as you can configure your machine to boot from it. But if you're working with removable media, you might prefer one of the other installation modes.
In each of these modes, you boot your machine from a static image. You will also need a writable medium to save updates to the system. In diskless mode, that medium is usually a small USB key (or a partition on one) that holds the changes you want to persist. Both the base Alpine system and all your changes will be unpacked into a memory-based filesystem.
The other, data mode is for when you're dealing with a large amount of persisting data, that you want to keep on a hard disk/SSD/other storage medium, rather than unpacking into memory. The default setup here is to store your /var partition directly on the hard storage medium. But as in the diskless mode, your root system still comes from a static ISO image.
These second and third installation modes are sometimes referred to, collectively, as "run-from-RAM" installations.
Key to these installation modes is Alpine's lbu utility. This tracks which files you've modified from their static ISO version, and want the changes to persist. The lbu utility saves those changes in .apkovl "overlay" files. (These are essentially tar-gzip archives, though they can also be encrypted. You can use the lbu utility with the sys mode, too, if you like: as a form of backup, or to configure overlay files for other systems. But for a robust incremental backup system, you'll probably want a more specialized tool, such as rsnapshot.)
The lbu utility is part of the alpine-conf package, which is required by alpine-base.
Alpine's installer consists of the /sbin/setup-* scripts, which are also part of the alpine-conf package.
A base Alpine install will include only needed packages such like alpine-base, syslinux, linux-lts (or another kernel package), and depending on your purposes packages like openssh and/or chrony.
Alpine's boot loader in that case is syslinux, or its companions
isolinuxorextlinux. The latest releases also have Grub and UEFI support. - The init system
An "init system" includes several different components. First, there is the initramfs, which is loaded by the bootloader. Alpine's tool for generating the initramfs is /sbin/mkinitfs, part of the mkinitfs package, which is required by Alpine's kernel packages and by its syslinux package. This tool's settings are read from /etc/mkinitfs/*, and it installs the initscript /usr/share/mkinitfs/initramfs-init into the initramfs.
Second, Alpine uses OpenRC to handle the rest of its initscripts. The base framework of this is in the openrc package, which is required by alpine-conf.
- The packaging and development system
The last important distinguishing feature of a Linux distro is its packaging and development systems.
In Alpine's case, these are something a hybrid between ArchLinux's, on the one hand, and Gentoo and FreeBSD's, on the other. Our package-management and build utilities work much like Arch's:
- mkinitfs, mentioned above, rebuilds Alpine's initramfs, like Arch's "mkinitcpio"
- apk from apk-tools is Alpine's package manager, like Arch's "pacman"; see Alpine Linux package management
- abuild is Alpine's build utility, like Arch's "makepkg"; see Abuild and Helpers
- Alpine's package-building scripts are named APKBUILD, like Arch's "PKGBUILD"
What Alpine borrows from Gentoo and FreeBSD is a tree of all the package-building scripts. It is called the Aports tree, and is kept as a single git repository. (Compare Gentoo's "Portage" and FreeBSD's "ports". Something similar can be set up with Arch's "abs", but it's not as tightly integrated with their package manager and build utilities.)
If you're only planning to install packages on a given system, and not do any development there, then the only pieces of this you'll need are mkinitfs and apk-tools, both included in a base Alpine install. If you do plan to do development, install alpine-sdk, which includes gcc, git, abuild, and the like, and see Developer Documentation.