MySQL: Difference between revisions

From Alpine Linux
(typographical/grammatical edits. updated github star counts)
m (Removed redirect back to this page.)
 
(4 intermediate revisions by 2 users not shown)
Line 3: Line 3:
# It is very similar to SQLSERVER and is also used in other systems
# It is very similar to SQLSERVER and is also used in other systems


'''In the world of Linux Alpine there is a software that provides it''', it is the [[MariaDB]], here we have a brief of info about compatibility and differences, but in short there's no great differences, if you have doubts check [[Mysql#MariaDB_vs_MySQL|MariaDB_vs_MySQL section here]]
'''In the world of Linux Alpine there is a software that provides it''', it is the [[MariaDB]], here we have a brief of info about compatibility and differences, but in short there's no great differences, if you have doubts check [[MySQL#MariaDB vs MySQL|MariaDB vs MySQL section here]]


'''In the wiki there are two approaches for its use''', [[Production_DataBases_:_mysql|the professional one]] (for servers and deploys) and the [[MariaDB|fast and simple]] usage (for developers and/or enthusiasts):
'''In the wiki there are two approaches for its use''', the professional one (for servers and deploys) and the [[MariaDB|fast and simple]] usage (for developers and/or enthusiasts):


= MariaDB - fast and simple use =
= MariaDB - fast and simple use =
Line 13: Line 13:
= MySQL (MariaDB) - Production usage =
= MySQL (MariaDB) - Production usage =


{{:Production_DataBases_:_mysql}}
[https://mariadb.org/ MariaDB] is a community-developed fork of the MySQL relational database management system intended to remain free under the GNU GPL. It is notable for being led by the original developers of MySQL, who forked it due to concerns over its acquisition by Oracle.
 
This page assumed that you have a general knowledge about MariaDB, so if you are new to MySQL first take a look at the [[MariaDB|MariaDB wiki page]] for information about how are packaged for alpine linux.
 
== Installation ==
 
Alpine Linux has dummy counterparts packages for those that are not close to that change from ''mysql'' to ''mariadb'' naming packages, please check the [[MariaDB|MariaDB wiki page]] for more information.
 
Take in consideration that the user <code>mysql</code> was created during instalation of packages, in the initialization section two users will be created in database init: <code>root</code> and <code>mysql</code>, and in that point only if are in their respective system accounts, will be able to connect to the database service.
 
<pre><nowiki>
apk add mysql mysql-client
</nowiki></pre>
 
That will install the most used ones.. <code>mariadb-cient</code> and <code>mariadb-server</code>, rest of packages are brief described here for more information, here are listed in orden of relevance for production server
 
{| class="wikitable"
|-
! MySQL name package !! Since Alpine: !! Brief usage !! Related package
|-
| mysql || v2 || it's a dummy package to easy install of mariadb || mariadb
|-
| mysql-client || v2 || it's a dummy package to easy install of commands tools || mariadb-client
|-
| mariadb || v2 || server equivalent to mysql-server || mariadb-common
|-
| mariadb-client || v2 || connection command line and tools || mariadb-common
|-
| mariadb-doc || v3.0 || manpages are there! || man man-pages
|-
| mariadb-connector-odbc || edge || coding or making OS level connections, to any DB without libs install || .
|-
| mariadb-connector-c || v3.8 || coding connection on C sources || mariadb-connector-c-dev
|-
| mariadb-backup || v3.8 || to external backup devices, not widely used, in past was inside mariadb package || .
|-
| mariadb-server-utils || v3.8 || server commands not widely used, in past was inside mariadb package || .
|-
| mariadb-dev || v3.1 || Need for compilations depends on source code || .
|-
| mariadb-test || v3.3 || testing suite from MariaDB tools || .
|-
| mariadb-mytop || v3.9 || data performance monitoring || .
|-
| mariadb-plugin-rocksdb || v3.9 || plain key-value event relational for data || .
|-
| mariadb-static || v3.8 || static libs for static non depends linking in builds || .
|-
| mariadb-embedded || v3.9 || the libmysqld identical interface as the C client || mariadb-embedded-dev
|-
| mariadb-embedded-dev || v3.9 ||  use the normal mysql.h and link with libmysqld instead of libmysqlclient || mariadb-dev
|-
| mariadb-openrc || v3.8 || separate scripts, in past was embebed on server package || .
|}
 
== Initialization ==
 
The alpine package of MySQL/MariaDB are like normal tarball of MySQL one, admins must be know what they want.. there's no automatic window-like here.
 
The ''datadir'' are located to <code>/var/lib/mysql</code> must be owned by the mysql user and group. You can modify this behavior but must edit the service file at <code>/etc/init.d</code> directory. Also, you need to set <code><nowiki>datadir=<YOUR_DATADIR></nowiki></code> under section <code>[mysqld]</code> at the config file.
 
# Initialize the main mysql database, and the data dir as standardized to <code>/var/lib/mysql</code> by the rc script
# Then initialize the service, root account and socket connection are enabled without password at this point
# Setup the root account by asignes a proper password, this are purely paranoid. due next step already do that!
# Setup and init the installation by running the <code>mysql_secure_installation</code>
# Setup permissions for manage others users and databases
 
<pre>
<nowiki>
mysql_install_db --user=mysql --datadir=/var/lib/mysql
 
rc-service mariadb start
 
mysqladmin -u root password toor
</nowiki>
</pre>
 
After that, all are initializated to proceed with configuration, now can be done using the <code>
mysql_secure_installation</code> script at the next section:
 
== Configuration ==
 
In order to finish setup into '''MariaDB''' now provide '''this script called <code>mysql_secure_instalation</code> that also are present as <code>mariadb-secure-installation</code>''', too. This script provides minimal and security setup to the database, and here are the questions made explained:
 
# '''Enter current password for root (enter for none):''' this are if you previously setup as we done in previous section a root password, just provide it and press enter, '''must be provided due we already set previously''' and from now, this sript will access to the engine and alter many setting on the database. Correct respond are <code>OK, successfully used password, moving on...</code>
#  '''Switch to unix_socket authentication [Y/n]''' Setting the root password or using the unix_socket ensures that only admins can log into engine database. Since mysql 5.6 and mariadb 10.2 a new auth mechanish are set, by socket authentiaction, when system user are same as mysql/mariadb user, in this case, no password are need. In production servers this are not the case and must be disabled, '''so answer NO''', and response will be <code>... skipping.</code>
# '''Change the root password? [Y/n]''' this answer are here only if the first one are just enter, or if can provide a better passowrd if no unix socket are set. Just press "n" only if you provided a good password, otherwise just
# '''Remove anonymous users? [Y/n]''' this permits remove the anonymous user created to log using socket authentication, only working on unix-like system. In any case, '''production system must remove it, so answer Y''' and proper respond must be  <code>... Success!</code>.
# '''Disallow root login remotely? [Y/n]''' Normally, root should only be allowed to connect from 'localhost'. This ensures that someone cannot guess at the root password from the network. For sure answer Y''' and proper respond must be  <code>... Success!</code>.
# '''Remove test database and access to it? [Y/n]''' By default, MariaDB comes with a database named 'test' that anyone can access. This is also intended only for testing, and should be removed, so answer Y''' and proper respond must be  <code>... Success!</code>.
# '''Reload privilege tables now? [Y/n]''' Reloading the privilege tables will ensure that all changes made so far will take effect immediately, so answer Y''' and proper respond must be  <code>... Success!</code>.
 
After reponse all the questions.. restart the service with <code>rc-service mariadb restart</code>
 
=== Configuration files ===
 
Due today were influenced by systemd standardization, the famous <nowiki>my.cnf</nowiki> are not more the main config file for the server engine. Now only few variables are defined there and all the settings are provided by independent files into the <code>/etc/my.cnf.d/</code> directory, user own config files are under <code>~/.my.cnf</code> config file of each home dir, and are read after global ones; so then we have:
 
{| class="wikitable"
|-
! Config file !! Path and name !! Versions of Alpine !! Contents to configure
|-
| my.cnf || <nowiki>/etc/mysql/my.cnf</nowiki> || v2 to v3.8 || All the directives, Global config file
|-
| mariadb-server.cnf || /etc/my.cnf.d/mariadb-server.cnf || since 3.9 || First Global config file, main directives
|-
| .my.cnf || <nowiki>$HOME</nowiki> || all || user name only config directives
|}
 
 
=== Production settings ===
 
These setting are only recommended for some server settings, there are the recommendation for high production settings:
 
 
{| class="wikitable"
|-
! Config setting !! Default !! Recommended !! Explanation
|-
| main ram || 2G || 8G - 16G || MariaDB/MySQL can run with 512M or 1G of ram, high production must use minimun of 4G or more.
|-
| data dir disk type || any || SSD || MariaDB/MySQL must run with faster SSD if high request will be produced.
|-
| collation_server || utf8_unicode_ci || utf8mb4_unicode_ci || With 8mb4 some characters are able to use more than a single byte.
|-
| character_set_client || iso8859-1 || utf8 or utf8mb4 || Important due are standard, for left to right use 8mb4 flavor
|-
| max_connections || 151 || 100 || total_connections = total_processes * (total_threads + script_servers + 1)
|-
| max_heap_table_size || 16M || 32M || allocate more memory to memory tables, for memory storage engines
|-
| tmp_table_size || 16M || 32M || It allows the sub queries to remain more in memory, making them faster
|-
| join_buffer_size || 32M || 64M || It allows the join queries to remain more in memory rather in temp files
|-
| innodb_file_format || unset || Barracuda || will allow longer indexes for important most used tables
|-
| innodb_large_prefix || unset || 1 || Must set if Barracuda file format are choosen
|-
| innodb_buffer_pool_size || 128M || 456M || hold as much tables and indexes in system memory as is possible
|-
| innodb_read_io_threads || 16 || 32 || On high I/O systems, a value greater than 1 may allow the disk I/O to be more sequential
|-
| innodb_write_io_threads || 16 || 32 || Only if you have SSD storage for the data MySQL/MariaDB database and temp files
|-
| innodb_buffer_pool_instances || 1 || 2 or 4 || Only for older MySQL/MariaDB engines,
|-
| innodb_io_capacity || 200 || 1200 - 2600 || Only if you have SSD storage for the data MySQL/MariaDB database and temp files
|-
| innodb_io_capacity_max || 200 || 2400 - 5200 || Only if you have SSD storage for the data MySQL/MariaDB database and temp files
|}
 
If you have SSD disks, use the recommended suggestion, otherwise, use minimum suggested. If you have physical hard drives, use 2000 * the number of active drives in the array. If using NVMe or PCIe Flash, much larger numbers as high as 200000 can be used, but those lasted storage devices will be a short life of course.
 
Newer system Alpine packages can set in independent files in any case those commands always works and where are not apply just will ignore the output:
 
* On older Alpine system must set config files for MAX ALLOWED PACKETS to minimun proper amount:
 
<pre>
<nowiki>
sed -i "s|.*max_allowed_packet\s*=.*|max_allowed_packet = 100M|g" /etc/mysql/my.cnf
sed -i "s|.*max_allowed_packet\s*=.*|max_allowed_packet = 100M|g" /etc/my.cnf.d/mariadb-server.cnf
</nowiki>
</pre>
 
* Only allow local connections on cases where there's only one server or no expected to connect from others:
 
<pre>
<nowiki>
sed -i "s|.*bind-address\s*=.*|bind-address=127.0.0.1|g" /etc/mysql/my.cnf
sed -i "s|.*bind-address\s*=.*|bind-address=127.0.0.1|g" /etc/my.cnf.d/mariadb-server.cnf
</nowiki>
</pre>
 
* If are not in domain controller, dont search for hostnames to improve performance responses (ideal for local only servers):
 
<pre>
<nowiki>
sed -i "s|.*skip-networking.*|skip-networking|g" /etc/mysql/my.cnf
sed -i "s|.*skip-networking.*|skip-networking|g" /etc/my.cnf.d/mariadb-server.cnf
</nowiki>
</pre>
 
* Set default charset to UTF8MB4, in newer versions (since Alpine v3.9), just added a new file to added thus customization, but older versions (below Alpine v3.8)of the package does not have a charset section, so you must added manually to the main configuration in each respective section:
 
<pre>
<nowiki>
cat > /etc/my.cnf.d/mariadb-server-default-charset.cnf << EOF
[client]
default-character-set = utf8mb4
 
[mysqld]
collation_server = utf8mb4_unicode_ci
character_set_server = utf8mb4
 
[mysql]
default-character-set = utf8mb4
EOF
</nowiki>
</pre>
 
== Updating or comming from upgrading ==
 
Mayor Upgrades beetween Alpine linux version are so easy as change the repository version, but the MySQL/MariaDB  engine need some extra steps when this are performed:
 
Upgrade databases on major releases
Upon a major version release of mariadb (for example mariadb-10.1.10-1 to mariadb-10.1.18-1), it is wise to upgrade databases:
 
# keep the old database (mysql sheme) structure of the engine daemon, currently this are not more the case, today this not make sense anymore
# upgrade the MariaDB/MySQL packages, of course with must be done if the upgrade process to mayor alpine version does not!
# run the <code>mysql_upgrade -u root -p</code> script, providing the password or root, (from the new package version) against the old still-running database (mysql sheme). This will produce some error messages; however, the upgrade will succeed.
# Restart the service
 
If are unable to run ''mysql_upgrade'' because MySQL cannot start try run MySQL in safemode with <code>mysqld_safe --datadir=/var/lib/mysql/</code> command and then run the <code>mysql_upgrade -u root -p</code> script.
 
= Relevant important notes =
 
== File system notes about the databases managed ==
 
'''Btrfs Notes'''
 
If the database (in <code>/var/lib/mysql</code>) resides on a [[Btrfs|btrfs]] file system, you should consider disabling '''Copy-on-Write''' for the directory before creating any database (schemes), after initialization you can enabled again. But .. on every database creation (scheme creation), you must disabled again, to avoid corrupted data.
 
'''ZFS Bock sizes'''
 
ZFS, unlike most other file systems, has a variable record size, or what is commonly referred to as a block size. By default, the recordsize on ZFS is 128KiB, which means it will dynamically allocate blocks of any size from 512B to 128KiB depending on the size of file being written. Most RDBMSes work in 8KiB-sized blocks by default. Although the block size is tunable for MySQL/MariaDB use an 8KiB block size by default.
 
It is usually desirable to tune ZFS instead to accommodate the databases, using a command such as <code>zfs set recordsize=8K /var/lib/mysql</code> (or change /var/lib/mysql to the mount point where /var/lib/mysql resides) and in the interest of saving memory, it is best to simply disable ZFS's caching of the database's file data and let the database do its own job  with <code>zfs set primarycache=metadata /var/lib/mysql</code> (or change /var/lib/mysql to the mount point where /var/lib/mysql resides).
 
But beware, these kinds of tuning parameters are only if RDBMSes are setup in dedicated partitions, if your root and of course database are all in one partition, dont do that. Separate ones.
 
== Restore root password ==
 
<pre>
<nowiki>
rc-service mysql stop
 
kill  `cat /run/mysqld/mysqld.pid`
 
/usr/bin/mysqld --datadir=/var/lib/mysql --pid-file=/run/mysqld/mysqld.pid --skip-grant-tables --skip-networking &
 
mysql -e "ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass';FLUSH PRIVILEGES;ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass';FLUSH PRIVILEGES;set password = password('MyNewPass');"
 
kill  `cat /run/mysqld/mysqld.pid`
 
rc-service mariadb restart
</nowiki>
</pre>
 
= See Also =
 
* [[MariaDB|MariaDB wiki page]]
* [[Production LAMP system: Lighttpd + PHP + MySQL]]
 
[[Category:Newbie]]
[[Category:Server]]
[[Category:Database]]
[[Category:Development]]
[[Category:Security]]
[[Category:Production]]


= MariaDB vs MySQL =
= MariaDB vs MySQL =

Latest revision as of 04:33, 28 August 2023

MySQL is the most popular database manager in free software for two simple reasons (which are not the best technical reasons):

  1. It's simple and very easy to use
  2. It is very similar to SQLSERVER and is also used in other systems

In the world of Linux Alpine there is a software that provides it, it is the MariaDB, here we have a brief of info about compatibility and differences, but in short there's no great differences, if you have doubts check MariaDB vs MySQL section here

In the wiki there are two approaches for its use, the professional one (for servers and deploys) and the fast and simple usage (for developers and/or enthusiasts):

MariaDB - fast and simple use

MariaDB is a community-developed fork of the MySQL relational database management system intended to remain free under the GNU GPL. It is notable for being led by the original developers of MySQL, who forked it due to concerns over its acquisition by Oracle.

This is the general documentation for normal and common general usage, for professional usage please use MySQL that is the same as MariaDB but with several modifications focused on production and security!

Installation

The Alpine Linux repositories no longer include the actual MySQL binaries, installing the mysql-* packages will instead install MariaDB.

Installing mariadb will create the user mysql. When the database is initialized, two users will be added to the database: root and mysql. By default these users will only be accessible if you are logged in as the corresponding system user.

apk add mysql mysql-client

Installing the above packages will add the main components of MariaDB to the system: mariadb-cient and mariadb-server. Other available packages are described in the table below, and are listed in order of relevance for a production server.

MySQL name package Since Alpine: Brief usage Related package
mysql v2 a transitional package that installs mariadb mariadb
mysql-client v2 a transitional package that installs the mariadb client tools mariadb-client
mariadb v2 server equivalent to mysql-server mariadb-common
mariadb-client v2 connection command line and tools mariadb-common
mariadb-doc v3.0 manpages for mariadb man man-pages
mariadb-connector-odbc edge coding or making OS level connections, to any DB without libs install .
mariadb-connector-c v3.8 coding connection on C sources mariadb-connector-c-dev
mariadb-backup v3.8 tool for physical online backups, no longer widely used .
mariadb-server-utils v3.8 server commands not widely used, in past was inside MariaDB package .
mariadb-dev v3.1 development files for MariaDB .
mariadb-test v3.3 testing suite from MariaDB tools .
mariadb-mytop v3.9 data performance monitoring .
mariadb-plugin-rocksdb v3.9 plain key-value event relational for data .
mariadb-static v3.8 static libs for static non depends linking in builds .
mariadb-embedded v3.9 the libmysqld identical interface as the C client mariadb-embedded-dev
mariadb-embedded-dev v3.9 use the normal mysql.h and link with libmysqld instead of libmysqlclient mariadb-dev
mariadb-openrc v3.8 separate scripts, in past was embebed on server package .

Initialization

The version of MariaDB in the Alpine repositories behave like the MySQL tarball. No graphical tools are included.

The datadir located at /var/lib/mysql must be owned by the mysql user and group. The location of the datadir can be changed by editing the mariadb service file in /etc/init.d. The new location will also need to be set by adding datadir=<YOUR_DATADIR> in the [mysqld] section in a mariadb configuration file.

Normal initialization of mariadb can be done as follows:

  1. Initialize the main mysql database, and the data dir as standardized to /var/lib/mysql by running rc-service mariadb setup
  2. Start the main service. At this point there will be no root password set. rc-service mariadb start
  3. Secure the database by running mysql_secure_installation
  4. Setup permissions for managing others users and databases

Configuration

In order to help with the basic configuration of the database engine, MariaDB provides mysql_secure_installation. This script walks you through the basics of securing the database. The options are explained below.

  1. Enter current password for root (enter for none): If you have previously set up a root password, provide it here and press enter. If not, just press enter.
  2. Switch to unix_socket authentication [Y/n] Setting the root password or using the Unix_socket ensures that only admins can log into engine database. For non-production servers just press "n" to setup a root password, which will give you the response ... skipping.
  3. Change the root password? [Y/n] Here you can change the root password, or set one if needed. Press "Y" and enter the new password.
  4. Remove anonymous users? [Y/n] Remove anonymous users created to log in using socket authentication. Unless you're sure you need this, answer "Y" to remove them.
  5. Disallow root login remotely? [Y/n] Normally, root should only be allowed to connect from 'localhost' in order to protect from password sniffing attempts over the network. Answer "Y".
  6. Remove test database and access to it? [Y/n] By default, MariaDB comes with a database named 'test' that anyone can access. If this is not needed, answer "Y".
  7. Reload privilege tables now? [Y/n] Reloading the privilege tables will ensure that all changes made so far will take effect immediately. Answer "Y".

After the script exits, restart the service with rc-service mariadb restart

To start the database daemon on every boot, run rc-update add mariadb default

Configuration files and customization

Rather than being stored in my.cnf, configuration settings for MariaDB are now organized in separate files. The primary configuration is done by adding files to /etc/my.cnf.d/. User-specific configuration files are stored in ~/.my.cnf. User-specific configuration files are loaded after the system-wide configuration. The locations of the various configuration files are listed below.

Config file Versions of Alpine Contents to configure
/etc/mysql/my.cnf v2 to v3.8 All the directives, global config file
/etc/my.cnf.d/mariadb-server.cnf since 3.9 First global config file, main directives
$HOME/.my.cnf all user name only config directives

As previously mentioned, this page describes basic usage of MariaDB. For professional usage, MySQL should also be referenced.

  • The following command will configure the server to accept all incoming connections. This should only be done for development, or if the database is not exposed to the Internet or a sensitive network.

sed -i "s|.*bind-address\s*=.*|bind-address=0.0.0.0|g" /etc/mysql/my.cnf sed -i "s|.*bind-address\s*=.*|bind-address=0.0.0.0|g" /etc/my.cnf.d/mariadb-server.cnf

  • For simple installations, disabling hostname search can improve performance, but is only useful for local servers.

sed -i "s|.*skip-networking.*|skip-networking|g" /etc/mysql/my.cnf sed -i "s|.*skip-networking.*|skip-networking|g" /etc/my.cnf.d/mariadb-server.cnf

Updating or coming from upgrading

When upgrading between Alpine Linux releases, MariaDB may also have a major version change, and the databases should be upgraded to match. The recommended steps in this process are detailed below.

  1. While it may no longer be strictly necessary, it's useful to backup your databases before upgrading the database version.
  2. Update Alpine Linux and the MariaDB/MySQL packages.
  3. Install mariadb-server-utils by running apk add mariadb-server-utils.
  4. Run mysql_upgrade -u root -p script, and provide the password for the root database user.
  5. Restart the service by running rc-service mariadb restart.

If mysql_upgrade fails because MySQL cannot start, try running MySQL in safemode with mysqld_safe --datadir=/var/lib/mysql/, and then run mysql_upgrade -u root -p again.

See Also

MySQL (MariaDB) - Production usage

MariaDB is a community-developed fork of the MySQL relational database management system intended to remain free under the GNU GPL. It is notable for being led by the original developers of MySQL, who forked it due to concerns over its acquisition by Oracle.

This page assumed that you have a general knowledge about MariaDB, so if you are new to MySQL first take a look at the MariaDB wiki page for information about how are packaged for alpine linux.

Installation

Alpine Linux has dummy counterparts packages for those that are not close to that change from mysql to mariadb naming packages, please check the MariaDB wiki page for more information.

Take in consideration that the user mysql was created during instalation of packages, in the initialization section two users will be created in database init: root and mysql, and in that point only if are in their respective system accounts, will be able to connect to the database service.

apk add mysql mysql-client

That will install the most used ones.. mariadb-cient and mariadb-server, rest of packages are brief described here for more information, here are listed in orden of relevance for production server

MySQL name package Since Alpine: Brief usage Related package
mysql v2 it's a dummy package to easy install of mariadb mariadb
mysql-client v2 it's a dummy package to easy install of commands tools mariadb-client
mariadb v2 server equivalent to mysql-server mariadb-common
mariadb-client v2 connection command line and tools mariadb-common
mariadb-doc v3.0 manpages are there! man man-pages
mariadb-connector-odbc edge coding or making OS level connections, to any DB without libs install .
mariadb-connector-c v3.8 coding connection on C sources mariadb-connector-c-dev
mariadb-backup v3.8 to external backup devices, not widely used, in past was inside mariadb package .
mariadb-server-utils v3.8 server commands not widely used, in past was inside mariadb package .
mariadb-dev v3.1 Need for compilations depends on source code .
mariadb-test v3.3 testing suite from MariaDB tools .
mariadb-mytop v3.9 data performance monitoring .
mariadb-plugin-rocksdb v3.9 plain key-value event relational for data .
mariadb-static v3.8 static libs for static non depends linking in builds .
mariadb-embedded v3.9 the libmysqld identical interface as the C client mariadb-embedded-dev
mariadb-embedded-dev v3.9 use the normal mysql.h and link with libmysqld instead of libmysqlclient mariadb-dev
mariadb-openrc v3.8 separate scripts, in past was embebed on server package .

Initialization

The alpine package of MySQL/MariaDB are like normal tarball of MySQL one, admins must be know what they want.. there's no automatic window-like here.

The datadir are located to /var/lib/mysql must be owned by the mysql user and group. You can modify this behavior but must edit the service file at /etc/init.d directory. Also, you need to set datadir=<YOUR_DATADIR> under section [mysqld] at the config file.

  1. Initialize the main mysql database, and the data dir as standardized to /var/lib/mysql by the rc script
  2. Then initialize the service, root account and socket connection are enabled without password at this point
  3. Setup the root account by asignes a proper password, this are purely paranoid. due next step already do that!
  4. Setup and init the installation by running the mysql_secure_installation
  5. Setup permissions for manage others users and databases

mysql_install_db --user=mysql --datadir=/var/lib/mysql

rc-service mariadb start

mysqladmin -u root password toor

After that, all are initializated to proceed with configuration, now can be done using the mysql_secure_installation script at the next section:

Configuration

In order to finish setup into MariaDB now provide this script called mysql_secure_instalation that also are present as mariadb-secure-installation, too. This script provides minimal and security setup to the database, and here are the questions made explained:

  1. Enter current password for root (enter for none): this are if you previously setup as we done in previous section a root password, just provide it and press enter, must be provided due we already set previously and from now, this sript will access to the engine and alter many setting on the database. Correct respond are OK, successfully used password, moving on...
  2. Switch to unix_socket authentication [Y/n] Setting the root password or using the unix_socket ensures that only admins can log into engine database. Since mysql 5.6 and mariadb 10.2 a new auth mechanish are set, by socket authentiaction, when system user are same as mysql/mariadb user, in this case, no password are need. In production servers this are not the case and must be disabled, so answer NO, and response will be ... skipping.
  3. Change the root password? [Y/n] this answer are here only if the first one are just enter, or if can provide a better passowrd if no unix socket are set. Just press "n" only if you provided a good password, otherwise just
  4. Remove anonymous users? [Y/n] this permits remove the anonymous user created to log using socket authentication, only working on unix-like system. In any case, production system must remove it, so answer Y and proper respond must be ... Success!.
  5. Disallow root login remotely? [Y/n] Normally, root should only be allowed to connect from 'localhost'. This ensures that someone cannot guess at the root password from the network. For sure answer Y and proper respond must be ... Success!.
  6. Remove test database and access to it? [Y/n] By default, MariaDB comes with a database named 'test' that anyone can access. This is also intended only for testing, and should be removed, so answer Y and proper respond must be ... Success!.
  7. Reload privilege tables now? [Y/n] Reloading the privilege tables will ensure that all changes made so far will take effect immediately, so answer Y and proper respond must be ... Success!.

After reponse all the questions.. restart the service with rc-service mariadb restart

Configuration files

Due today were influenced by systemd standardization, the famous my.cnf are not more the main config file for the server engine. Now only few variables are defined there and all the settings are provided by independent files into the /etc/my.cnf.d/ directory, user own config files are under ~/.my.cnf config file of each home dir, and are read after global ones; so then we have:

Config file Path and name Versions of Alpine Contents to configure
my.cnf /etc/mysql/my.cnf v2 to v3.8 All the directives, Global config file
mariadb-server.cnf /etc/my.cnf.d/mariadb-server.cnf since 3.9 First Global config file, main directives
.my.cnf $HOME all user name only config directives


Production settings

These setting are only recommended for some server settings, there are the recommendation for high production settings:


Config setting Default Recommended Explanation
main ram 2G 8G - 16G MariaDB/MySQL can run with 512M or 1G of ram, high production must use minimun of 4G or more.
data dir disk type any SSD MariaDB/MySQL must run with faster SSD if high request will be produced.
collation_server utf8_unicode_ci utf8mb4_unicode_ci With 8mb4 some characters are able to use more than a single byte.
character_set_client iso8859-1 utf8 or utf8mb4 Important due are standard, for left to right use 8mb4 flavor
max_connections 151 100 total_connections = total_processes * (total_threads + script_servers + 1)
max_heap_table_size 16M 32M allocate more memory to memory tables, for memory storage engines
tmp_table_size 16M 32M It allows the sub queries to remain more in memory, making them faster
join_buffer_size 32M 64M It allows the join queries to remain more in memory rather in temp files
innodb_file_format unset Barracuda will allow longer indexes for important most used tables
innodb_large_prefix unset 1 Must set if Barracuda file format are choosen
innodb_buffer_pool_size 128M 456M hold as much tables and indexes in system memory as is possible
innodb_read_io_threads 16 32 On high I/O systems, a value greater than 1 may allow the disk I/O to be more sequential
innodb_write_io_threads 16 32 Only if you have SSD storage for the data MySQL/MariaDB database and temp files
innodb_buffer_pool_instances 1 2 or 4 Only for older MySQL/MariaDB engines,
innodb_io_capacity 200 1200 - 2600 Only if you have SSD storage for the data MySQL/MariaDB database and temp files
innodb_io_capacity_max 200 2400 - 5200 Only if you have SSD storage for the data MySQL/MariaDB database and temp files

If you have SSD disks, use the recommended suggestion, otherwise, use minimum suggested. If you have physical hard drives, use 2000 * the number of active drives in the array. If using NVMe or PCIe Flash, much larger numbers as high as 200000 can be used, but those lasted storage devices will be a short life of course.

Newer system Alpine packages can set in independent files in any case those commands always works and where are not apply just will ignore the output:

  • On older Alpine system must set config files for MAX ALLOWED PACKETS to minimun proper amount:

sed -i "s|.*max_allowed_packet\s*=.*|max_allowed_packet = 100M|g" /etc/mysql/my.cnf
sed -i "s|.*max_allowed_packet\s*=.*|max_allowed_packet = 100M|g" /etc/my.cnf.d/mariadb-server.cnf

  • Only allow local connections on cases where there's only one server or no expected to connect from others:

sed -i "s|.*bind-address\s*=.*|bind-address=127.0.0.1|g" /etc/mysql/my.cnf
sed -i "s|.*bind-address\s*=.*|bind-address=127.0.0.1|g" /etc/my.cnf.d/mariadb-server.cnf

  • If are not in domain controller, dont search for hostnames to improve performance responses (ideal for local only servers):

sed -i "s|.*skip-networking.*|skip-networking|g" /etc/mysql/my.cnf
sed -i "s|.*skip-networking.*|skip-networking|g" /etc/my.cnf.d/mariadb-server.cnf

  • Set default charset to UTF8MB4, in newer versions (since Alpine v3.9), just added a new file to added thus customization, but older versions (below Alpine v3.8)of the package does not have a charset section, so you must added manually to the main configuration in each respective section:

cat > /etc/my.cnf.d/mariadb-server-default-charset.cnf << EOF
[client]
default-character-set = utf8mb4

[mysqld]
collation_server = utf8mb4_unicode_ci
character_set_server = utf8mb4

[mysql]
default-character-set = utf8mb4
EOF

Updating or comming from upgrading

Mayor Upgrades beetween Alpine linux version are so easy as change the repository version, but the MySQL/MariaDB engine need some extra steps when this are performed:

Upgrade databases on major releases Upon a major version release of mariadb (for example mariadb-10.1.10-1 to mariadb-10.1.18-1), it is wise to upgrade databases:

  1. keep the old database (mysql sheme) structure of the engine daemon, currently this are not more the case, today this not make sense anymore
  2. upgrade the MariaDB/MySQL packages, of course with must be done if the upgrade process to mayor alpine version does not!
  3. run the mysql_upgrade -u root -p script, providing the password or root, (from the new package version) against the old still-running database (mysql sheme). This will produce some error messages; however, the upgrade will succeed.
  4. Restart the service

If are unable to run mysql_upgrade because MySQL cannot start try run MySQL in safemode with mysqld_safe --datadir=/var/lib/mysql/ command and then run the mysql_upgrade -u root -p script.

Relevant important notes

File system notes about the databases managed

Btrfs Notes

If the database (in /var/lib/mysql) resides on a btrfs file system, you should consider disabling Copy-on-Write for the directory before creating any database (schemes), after initialization you can enabled again. But .. on every database creation (scheme creation), you must disabled again, to avoid corrupted data.

ZFS Bock sizes

ZFS, unlike most other file systems, has a variable record size, or what is commonly referred to as a block size. By default, the recordsize on ZFS is 128KiB, which means it will dynamically allocate blocks of any size from 512B to 128KiB depending on the size of file being written. Most RDBMSes work in 8KiB-sized blocks by default. Although the block size is tunable for MySQL/MariaDB use an 8KiB block size by default.

It is usually desirable to tune ZFS instead to accommodate the databases, using a command such as zfs set recordsize=8K /var/lib/mysql (or change /var/lib/mysql to the mount point where /var/lib/mysql resides) and in the interest of saving memory, it is best to simply disable ZFS's caching of the database's file data and let the database do its own job with zfs set primarycache=metadata /var/lib/mysql (or change /var/lib/mysql to the mount point where /var/lib/mysql resides).

But beware, these kinds of tuning parameters are only if RDBMSes are setup in dedicated partitions, if your root and of course database are all in one partition, dont do that. Separate ones.

Restore root password


rc-service mysql stop

kill  `cat /run/mysqld/mysqld.pid`

/usr/bin/mysqld --datadir=/var/lib/mysql --pid-file=/run/mysqld/mysqld.pid --skip-grant-tables --skip-networking &

mysql -e "ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass';FLUSH PRIVILEGES;ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass';FLUSH PRIVILEGES;set password = password('MyNewPass');"

kill  `cat /run/mysqld/mysqld.pid`

rc-service mariadb restart

See Also

MariaDB vs MySQL

It is more a matter of compatibility than of performance and characteristics (with the arrival of MySQL v8) .. and it depends on whether there is a purely business and support approach "zero concern".

MySQL, being from Oracle, establishes limits if a license is not purchased, MariaDB has a large connection pool, more than 200,000 connections, while MySQL has a smaller connection pool if it is not licensed.

However, MariaDB does not support data masking and dynamic column while MySQL supports it, also MariaDB although it has 12 new storage engines while MySQL has less these are very new and MySQL's are widely known and tested.

In terms of performance, MariaDB is only a little faster than MySQL, this is because MySQL implements more business features, but this is only noticeable using these many features.

Which is more optimal this is not clear .. in general MySQL should be less, and MariaDB faster, there is a third option which is Percona which is the same MySQL service but with special aggressive optimization patches for servers. Percona mysql code must be compiled in Alpine linux.

Comparison table

Characteristic MariaDB MySQL
Storage Engines up to 12 but many in development stage less but well tested
Performance just a little faster less, there is almost no difference
Initial version 2009 (5.3) 1995 (3.0)
Data masking no yes
dynamic columns no yes
Monitoring SQLyog MySQLworkbench
Routing MariaDB MaxScale Mysql Router
Analytics MariaDB ColumnStore not have
Git starred times (github) around 3.6k around 6k

For more info check a review here: http://qgqlochekone.blogspot.com/2020/04/mariadb-mysql-and-mysqlworkbench.html