PXE boot
This functionality is still largely prototypal. Some things could still be broken.
Guide to options
- ip
- Required for PXE.
- Set
ip=dhcp
to get an IP via DHCP. (Requires af_packet.ko in the initrd, in addition to the modules needed for your NIC.) - Set
ip=client-ip::gateway-ip:netmask::[device]:
to specify an IP manually.device
is a device name (e.g.eth0
). If one is not specified, one is chosen automatically.
- apkovl
- Valid forms include:
- An HTTP, HTTPS or FTP URL to an apkovl.tar.gz file which will be retrieved and applied.
device_name[:fs_type]:path
, wheredevice_name
does not include/dev
(e.g.,sda
).fs_type
is optional (e.g.ext4
).path
expresses the path on the device to the apkovl.tar.gz file.- A relative path, interpreted relative to the root of the
alpine_dev
. - If not specified, a file matching
*.apkovl.tar.gz
is searched for in the root of theovl_dev
. (If more than one exists in the root of a device, all are ignored.)
- alpine_dev (this parameter is no longer used)
- The
alpine_dev
specifies a device used for reference data which must reside on a filesystem; currently, this is only the case for kernel modules. - This is also used to obtain APKs if a repository is not explicitly specified; see below.
- Valid forms include:
- A device name, not including
/dev/
. UUID=filesystem-uuid
LABEL=filesystem-label
nfs:ip-address:path
, specifying an NFS export to use as the device. You may need to add modules to the initrd.
- A device name, not including
- ovl_dev (this parameter is no longer used)
- Valid forms include:
device_name[:fs_type]
- If not specified, various devices are searched for a file matching
*.apkovl.tar.gz
in the root directory.
- This argument can contain the fields
{MAC}
and{UUID}
, which will be substituted with the MAC address of the NIC used by Alpine and the system's DMI "Product UUID" respectively. If these substitutions are used, the value passed to ovl_dev must be enclosed in quotes. e.g.ovl_dev="http://.../{MAC}.apkovl.tar.gz"
.
- alpine_repo
- Required.
/etc/apk/repositories
will be filled from this. May be a URL. Otherwise, try and find a directory containing the marker file.boot_repository
on thealpine_dev
. Please note that although "auto" might appear documented as a valid value, it will not work when PXE booting.
- modloop
- If the specified file protocol is http/ftp or https (if wget is installed), the modloop file will be downloaded to the /lib directory and will be mounted afterwards
- e.g. modloop=http://192.168.1.1/pxe/alpine/grsec.modloop.squashfs in the append section of your bootloader
- console
- Examples:
tty0
ttyS1
ttyAMA0
- acpi
- Valid forms include:
force
- ssh_key
- Valid forms include:
- An HTTP, HTTPS or FTP URL to a public SSH key which will be retrieved and added to the list of authorized SSH keys.
- modules
HOWTO
Alpine can be PXE booted starting with Alpine 2.6-rc2. In order to accomplish this you must complete the following steps:
- Set up a DHCP server and configure it to support PXE boot.
- Set up a TFTP server to serve the PXE bootloader.
- Set up an HTTP server to serve the rest of the boot files.
- Set up an NFS server from which Alpine can load kernel modules.
- Configure mkinitfs to generate a PXE-bootable initrd.
This article describes a setup using gpxe as a PXE bootloader, but you could also use PXELINUX.
Standard setup of all involved services is not covered here; advice on setting up basic DHCP/TFTP/HTTP/NFS/etc. is widely available.
Set up a DHCP server and configure it to support PXE boot
If you use the ISC DHCP server (package "dhcp"), amend your subnet
block like so:
next-server 10.0.0.1; filename "gpxe.kpxe";
Set up a TFTP server to serve the PXE bootloader
This material is work-in-progress ... Hyperlink to gPXE binary is dead. This entire section is in dire need of updating. |
Install a TFTP server (package "tftp-hpa"). You will need to place a gPXE image at /var/tftproot/gpxe.kpxe
. You can generate an image online at ROM-o-matic.eu. Select the ".kpxe" output format and the "undionly" driver. You will need to specify a custom boot script. Select "Customize". The following boot script works well:
dhcp net0 chain http://${net0/next-server}/gpxe-script
You can include ${net0/mac}
and ${uuid}
in the URL for the interface MAC address and machine UUID respectively.
Note that as of writing, ROM-o-matic appears to produce a buggy image unless it is used with the "undionly" driver. If you require a different driver, consider building gPXE yourself, especially if you experience inexplicable connectivity issues. Common symptoms are a seemingly correctly configured, randomly functional network connection which appears to suffer from extreme packet loss.
Set up an HTTP server to serve the rest of the PXE boot files
Suppose you have an HTTP server configured to serve from /srv/http
. Place an appropriate gPXE script, such as the following, at /srv/http/prov/gpxe-script
:
#!gpxe kernel http://${net0/next-server}/prov/grsec ip=dhcp alpine_dev=nfs:${net0/next-server}:/srv/nfs/depot alpine_repo=http://nl.alpinelinux.org/alpine/v2.5/main/ initrd http://${net0/next-server}/prov/pxerd boot
ip=dhcp
instructs the initrd to obtain an IP via DHCP. The NFS share specified by alpine_dev
will be mounted. alpine_repo
specifies an apk repository to use.
Using lpxelinux instead of gPXE
Since recent version of syslinux, pxelinux also has support to boot over ftp/http.
The pxelinux.cfg/default file (or specific MAC address file name) should be in the same format as with regular syslinux.
You will need to use a copy of the lpxelinux.0 found when installing syslinux on alpine: /usr/share/syslinux/lpxelinux.0 and copy it to your tftp server.
Don't forget to also copy ldlinux.c32, as its a dependency of syslinux variants (see documentation).
DEFAULT alpine LINUX http://ipaddr/grsec INITRD http://ipaddr/grsec.gz APPEND ip=dhcp modules=loop,squashfs,sd-mod,usb-storage alpine_repo=http://repo-url modloop=http://ipaddr/grsec.modloop.squashfs apkovl=http://ipaddr/localhost.apkovl.tar.gz
Using pxelinux instead of gPXE
Since recent version of syslinux, pxelinux also has support to boot over tftp.
The pxelinux.cfg/default file (or specific MAC address file name) should be in the same format as with regular syslinux.
You will need to use a copy of the pxelinux.0 found when installing syslinux on alpine: /usr/share/syslinux/pxelinux.0 and copy it to your tftp server.
Don't forget to also copy ldlinux.c32, as its a dependency of syslinux variants (see documentation).
PROMPT 0 TIMEOUT 3 default alpine LABEL alpine LINUX alpine-vmlinuz-grsec INITRD alpine-pxerd APPEND ip=dhcp alpine_dev=nfs:192.168.1.1:/srv/boot/alpine modloop=http://192.168.1.1/modloop-grsec nomodeset quiet apkovl=http://192.168.1.1/localhost.apkovl.tar.gz
vmlinuz-grsec is taken from a system running in memory from usb.
pxerd is generated on a system running in memory from usb. With network nfs and virtio_net added.
/srv/boot/alpine is a copy of /media/usb from a system running in memory from usb.
modules=loop,squashfs,sd-mod,usb-storage is not needed as loop and squashfs are hard coded into the init script and we do not use sd nor usb.
modloop=http://ipaddr/grsec.modloop.squashfs does not seems to work. Without neither...(*)
apkovl=http://ipaddr/localhost.apkovl.tar.gz.
(*) about the modloop problem: /etc/init.d/modloop tries to load the file from /media/nfs instead of /media/alpine and starts trying to mount it! (unsuccessfully) A fix to it is (a proposal) see #4015
Set up an NFS server from which Alpine can load kernel modules
NOTE: by adding modloop with http support, this is no need for modules.
Set up an NFS share at /srv/nfs/depot
and export it via /etc/exports:
/srv/nfs/depot *(ro,no_root_squash,no_subtree_check)
This export does not currently need to contain anything, unless you wish to use it to serve apks, in which case ensure that a file ".boot_repository" is created in the directory containing architecture subdirectories and remove alpine_repo from the kernel arguments. The repository will be autodetected by searching for ".boot_repository". Eventually Alpine will be able to load kernel modules from this export.
Configure mkinitfs to generate a PXE-bootable initrd
You need to add drivers for any Ethernet cards with which you might PXE boot to your initrd. To do this, create /etc/mkinitfs/features.d/network.modules. List any kernel drivers you require for your Ethernet card. If you are using an Intel E1000 card (this is used by VMware and VirtualBox, and so is good for testing), add
kernel/drivers/net/ethernet/intel/e1000/*.ko
You also must create the following files so that the modules and scripts necessary for DHCP and NFS are inserted into the initrd.
/etc/mkinitfs/features.d/dhcp.files, containing: /usr/share/udhcpc/default.script /etc/mkinitfs/features.d/dhcp.modules, containing: kernel/net/packet/af_packet.ko /etc/mkinitfs/features.d/nfs.modules, containing: kernel/fs/nfs/*
Finally edit /etc/mkinitfs/mkinitfs.conf and add features squashfs, network, dhcp and nfs.
Generate a PXE-capable initrd by running
mkinitfs -o /srv/http/prov/pxerd
You should now be able to PXE-boot Alpine Linux. This feature is still in development and non-fatal post-initrd boot errors (regarding modloop, etc.) are to be expected.
Specifying an apkovl
The location of the .apkovl to load can be specified using the kernel parameters `apkovl`. (Full definitions above.)
For example, to have the apkovl loaded from the device sda5 add to the kernel arguments:
apkovl=sda5
Or, to load a specific apkovl from a HTTP server:
apkovl=http://..../file.apkovl.tar.gz
All string occurences of {MAC} and {UUID} in this parameter will be substituted with the MAC address of the boot interface and the machine UUID respectively. If you use these strings, ensure you place the URL in quotes.
A note about UEFI
If you are booting a uefi system you will need to append initrd=initrdname to the kernel options to boot correctly.