Udhcpc: Difference between revisions
Rickyrockrat (talk | contribs) mNo edit summary |
Rickyrockrat (talk | contribs) mNo edit summary |
||
| Line 18: | Line 18: | ||
The hostname will send the DHCP option to the server to tell the server the name of this client. | The hostname will send the DHCP option to the server to tell the server the name of this client. | ||
The documentation resides [https://udhcp.busybox.net/README.udhcpc Here]<br> | |||
Its default configuration may be overwritten by /etc/udhcpc/udhcpc.conf | Its default configuration may be overwritten by /etc/udhcpc/udhcpc.conf | ||
| Line 60: | Line 61: | ||
r=$(/sbin/ip route | grep ^default | head -n 1) | r=$(/sbin/ip route | grep ^default | head -n 1) | ||
# Needs iproute2 package, rather than busybox's "ip", to change mtu | # Needs iproute2 package, rather than busybox's "ip", to change mtu | ||
/sbin/ip route replace $r mtu 1492 | /sbin/ip route replace $r mtu 1492<br> | ||
<b>hack alert</b> | |||
I needed to restart my firewall (which replaces the iptables script from Alpine) when the client binds to a new IP, so I added the following line in the function bound(), right after 'resolvconf':<br> | |||
/etc/init.d/iptables reload<br> | |||
<br> | |||
The reload drops all firewall rules, re-acquires the Internal and external IPs, and re-writes the rules. I'm sure there is a better way. | |||
[[Category:Networking]] | [[Category:Networking]] | ||
[[Category:Embedded Systems]] | [[Category:Embedded Systems]] | ||
Revision as of 21:43, 2 January 2021
 Please help us expand this article by contributing. |
You may want to customize the behavior of the default DHCP client (udhcpc from busybox), which is called by /sbin/ifup by having "dhcp" in /etc/network/interfaces.
The default behavior is driven by the script /usr/share/udhcpc/default.script
Entries in /etc/network/interfaces for dhcp interfaces will drive the udhcpc command line. For example:
auto eth0
iface eth0 inet dhcp
hostname myhostname
Will set these parameters on the command line:
-i eth0 -x hostname:myhostname
The hostname will send the DHCP option to the server to tell the server the name of this client.
The documentation resides Here
Its default configuration may be overwritten by /etc/udhcpc/udhcpc.conf
Authorized key:value pairs are:
| key | default value | possible values |
|---|---|---|
| NO_GATEWAY | - | <list of iface names> |
| IF_METRIC | - | <metric value> |
| IF_PEER_DNS | yes | <anything but yes> |
| RESOLV_CONF | /etc/resolv.conf | no ; NO ; - |
| NO_DNS | - | <list of iface names> |
Example /etc/udhcpc/udhcpc.conf:
RESOLV_CONF="no" # Prevents overwriting of /etc/resolv.conf
Custom scripts can be added as /etc/udhcpc/pre-* and /etc/udhcpc/post-* to be run before/after deconfig/renew/bound DHCP events - they must be marked as executable by root, e.g. chmod 744
As an example, /etc/udhcpc/post-bound/mtu could contain, to change the interface MTU from the default (1500) to 1492, which is useful if on ADSL (which uses 8 bytes):
r=$(/sbin/ip route | grep ^default | head -n 1) # Needs iproute2 package, rather than busybox's "ip", to change mtu /sbin/ip route replace $r mtu 1492
hack alert
I needed to restart my firewall (which replaces the iptables script from Alpine) when the client binds to a new IP, so I added the following line in the function bound(), right after 'resolvconf':
/etc/init.d/iptables reload
The reload drops all firewall rules, re-acquires the Internal and external IPs, and re-writes the rules. I'm sure there is a better way.