NetworkManager: Difference between revisions

Latest revision as of 03:35, 29 March 2025

NetworkManager can be used to provide network management services in Alpine Linux. Ensure that only one network management service is running at a time to prevent conflicts between them.

Prerequisites

The community repository must be enabled.
Set up eudev. Otherwise your network devices can be listed as (strictly-)unmanaged.
A non-root user account, is recommended.
Ensure that network interfaces are configured and tested.

Installation

Install the basic network management daemon of NetworkManager suite:

# apk add networkmanager

To be able to use NetworkManager with your current user (i.e. not root), you need to add your user to the plugdev group created by NetworkManager :

# adduser <YourUsername> plugdev

Note: If you are already logged in, you will need to relogin for the new group to take effect.

Some of the popular NetworkManager user interfaces or front ends available as sub-packages are:

TUI: networkmanager-tui, (run nmtui)
Command line: networkmanager-cli (run nmcli)
GUI: plasma-nm for Plasma integration and applet
GUI: network-manager-applet for a GTK system tray applet

Tip: Refer networkmanager-* for the list of all NetworkManager subpackages. Install the appropriate subpackages based on the required functionalities.

Networkmanager service

Start NetworkManager:

# rc-service networkmanager start

Set the service to autostart on boot:

# rc-update add networkmanager default

Wired networks

If wired networks do not appear or you get an error message like "Could not activate connection: Connection 'Ethernet connection 1' is not available on device eth0 because device is strictly unmanaged", add the following to the /etc/NetworkManager/NetworkManager.conf file as follows:

Contents of /etc/NetworkManager/NetworkManager.conf

[ifupdown]
managed=true

Wireless networks

NetworkManager supports both wireless daemons i.e iwd and wpa_supplicant. Using both daemons simulatenously leads to conflicts. First Install the networkmanager-wifi package if you want NetworkManager to connect and manage wifi:

# apk add networkmanager-wifi

wpa_supplicant backend

wpa supplicant is the default wifi daemon in Alpine Linux. Open /etc/NetworkManager/NetworkManager.conf in a text editor and change it to something like this:

Contents of /etc/NetworkManager/NetworkManager.conf

[main] 
dhcp=internal
plugins=ifupdown,keyfile

[ifupdown]
managed=true

[device]
wifi.scan-rand-mac-address=yes
wifi.backend=wpa_supplicant

Now you need to stop conflicting services:

# rc-service networking stop # rc-service wpa_supplicant stop

Now restart NetworkManager:

# rc-service networkmanager restart

Now connect to a network using one of the interfaces configured. If that connects and stays connected with no issues add the networkmanager service and disable the networking and wpa_supplicant boot services:

# rc-update add networkmanager default # rc-update del networking boot # rc-update del wpa_supplicant boot

iwd backend

NetworkManager supports wireless networks with iwd daemon as backend, however, consider existing issues before using it.

To use iwd as backend retain the NetworkManager's configuration file /etc/NetworkManager/NetworkManager.conf as shown in previous section and modify that [device] section alone as follows:

Contents of /etc/NetworkManager/NetworkManager.conf

...
[device]
wifi.backend=iwd
wifi.iwd.autoconnect=yes

Ensure that wpa_supplicant and related services are stopped before continuing. Start the iwd service and restart NetworkManager:

# rc-service iwd start # rc-service networkmanager restart

VPN support

NetworkManager has support for Wireguard and support for other VPN's are provided by plugins in the following subpackage:

networkmanager-openvpn for OpenVPN

Plasma support

Todo: (KDE Plasma Desktop) find out if it is possible to prevent requesting the password for KDE Wallet on login

Todo: (KDE Plasma Desktop) for autoconnect to wifi network on start, it appears that the "all users may connect to this network" option must be selected in settings, as root is not a choice to allow. There are likely better workarounds

Troubleshooting

nm-applet not authorized to control networking

You can enable all users to edit connections without adding polkit.

First, make the conf.d directory for networkmanager:

# mkdir -p /etc/NetworkManager/conf.d

Then, add following content to /etc/NetworkManager/conf.d/any-user.conf so that

Contents of /etc/NetworkManager/conf.d/any-user.conf

[main]
auth-polkit=false

Finally, restart networkmanager:

# rc-service networkmanager restart

@@ Line 1: / Line 1: @@
-[https://networkmanager.dev/ NetworkManager] is the standard Linux network configuration tool suite. For the list of all NetworkManager subpackages refer {{pkg|networkmanager-*}}
+[https://networkmanager.dev/ NetworkManager] can be used to provide network management services in Alpine Linux. Ensure that only one network management service is running at a time to prevent conflicts between them.
+== Prerequisites ==
+* The [[Repositories#Managing_repositories|community repository must be enabled]].
+* Set up [[eudev]]. Otherwise your network devices can be listed as (strictly-)unmanaged.
+* A [[Setting_up_a_new_user#Creating_a_new_user|non-root user account]], is recommended.
+* Ensure that [[Configure Networking|network interfaces]] are configured and [[Configure_Networking#Connectivity_testing|tested]].
 == Installation ==
-Networkmanager needs to have [[eudev|udev]] to be setup properly. Otherwise your network devices can be listed as (strictly-)unmanaged.
+Install the basic network management daemon of NetworkManager suite:{{Cmd|# apk add {{Pkg|networkmanager}}}}
-{{:Include:Setup Device Manager}}
-For Networkmanager to manage devices, your user needs to be in the <code>plugdev</code> group: {{Cmd|# adduser <YourUsername> plugdev}}
+To be able to use NetworkManager with your current user (i.e. not root), you need to add your user to the <code>plugdev</code> group created by NetworkManager : {{Cmd|# adduser <YourUsername> plugdev}}
-{{Note|you will need to log out for the new group to take effect}}
+{{Note|If you are already logged in, you will need to relogin for the new group to take effect.}}
-Install the basic Network Management daemon of NetworkManager suite:{{Cmd|# apk add {{Pkg|networkmanager}}}}
+Some of the popular NetworkManager user interfaces or front ends available as sub-packages are:
-There are multiple user interfaces available in NetworkManager suite. Choose the appropriate subpackage:
+* TUI: {{Pkg|networkmanager-tui}}, (run <code>nmtui</code>)
-* TUI: {{Pkg|networkmanager-tui}}, a curses-based interface (run <code>nmtui</code>)
 * Command line: {{Pkg|networkmanager-cli}} (run <code>nmcli</code>)
 * GUI: {{Pkg|plasma-nm}} for Plasma integration and applet
 * GUI: {{Pkg|network-manager-applet}} for a GTK system tray applet
+{{Tip| Refer {{pkg|networkmanager-*}} for the list of all NetworkManager subpackages. [[Install]] the appropriate subpackages based on the required functionalities.}}
 == Networkmanager service ==
-Ensure that [[Configure Networking|network interfaces]] are configured and [[Configure_Networking#Connectivity_testing|tested]].
 Start NetworkManager:{{Cmd|# rc-service networkmanager start}}
@@ Line 25: / Line 29: @@
 == Wired networks ==
-If wired networks do not appear or you get an error message like "Could not activate connection: Connection 'Ethernet connection 1' is not available on device eth0 because device is strictly unmanaged", add the following to {{path|/etc/NetworkManager/NetworkManager.conf}}:
+If wired networks do not appear or you get an error message like "Could not activate connection: Connection 'Ethernet connection 1' is not available on device eth0 because device is strictly unmanaged", add the following to the {{path|/etc/NetworkManager/NetworkManager.conf}} file as follows:{{Cat|/etc/NetworkManager/NetworkManager.conf|[ifupdown]
+managed{{=}}true}}
-{{Cat|/etc/NetworkManager/NetworkManager.conf|[ifupdown]
-managed{{=}}true
-}}
 == Wireless networks ==
-Install {{Pkg|networkmanager-wifi}} package if you want NetworkManager to connect and manage wifi:{{Cmd|# apk add {{Pkg|networkmanager-wifi}}}}
+[[NetworkManager]] supports both wireless daemons i.e [[#iwd_backend|iwd]] and [[#wpa_supplicant_backend|wpa_supplicant]]. Using both daemons simulatenously leads to conflicts. First Install the {{Pkg|networkmanager-wifi}} package if you want NetworkManager to connect and manage wifi:{{Cmd|# apk add {{Pkg|networkmanager-wifi}}}}
-[[NetworkManager]] supports both wireless daemons i.e [[#iwd_backend|iwd]] and [[#wpa_supplicant_backend|wpa_supplicant]]. Using both may lead to conflicts.
 === wpa_supplicant backend ===
 {{Main|Wi-Fi}}
-[[Wi-Fi#wpa supplicant|wpa supplicant]] is the default in Alpine Linux and can be [[Wi-Fi#Automatic_Configuration_on_System_Boot|configured to start]] on system boot.
+[[Wi-Fi#wpa supplicant|wpa supplicant]] is the default wifi daemon in Alpine Linux. Open {{path|/etc/NetworkManager/NetworkManager.conf}} in a text editor and change it to something like this: {{Cat|/etc/NetworkManager/NetworkManager.conf|<nowiki>[main]
-{{Note|[[Wi-Fi#wpa supplicant|wpa supplicant]] might not be required, if it isn't it may be a good idea to have it setup just as a fallback.}}
-Now open {{path|/etc/NetworkManager/NetworkManager.conf}} in a text editor and change it to something like this: {{Cat|/etc/NetworkManager/NetworkManager.conf|<nowiki>[main]
 dhcp=internal
 plugins=ifupdown,keyfile
@@ Line 54: / Line 49: @@
 wifi.backend=wpa_supplicant</nowiki>}}
-{{Note|If these options dont work on your system, change them as necessary.}}
+Now you need to stop conflicting services:{{Cmd|<nowiki># rc-service networking stop
+# rc-service wpa_supplicant stop</nowiki>}}
-Now you need to stop conflicting services:
-{{Cmd|# rc-service networking stop}}
-{{Cmd|# rc-service wpa_supplicant stop}}
 Now restart NetworkManager:{{Cmd|# rc-service networkmanager restart}}
-Now connect to a network using one of the interfaces configured. If that connects and stays connected with no issues enable the <code>networkmanager</code> service and disable the <code>networking</code> and <code>wpa_supplicant</code> boot services:
+Now connect to a network using one of the interfaces configured. If that connects and stays connected with no issues add the <code>networkmanager</code> service and disable the <code>networking</code> and <code>wpa_supplicant</code> boot services:{{Cmd|<nowiki># rc-update add networkmanager default
+# rc-update del networking boot
-{{Cmd|# rc-update add networkmanager}}
+# rc-update del wpa_supplicant boot</nowiki>}}
-{{Cmd|# rc-update del networking boot}}
-{{Cmd|# rc-update del wpa_supplicant boot}}
 === iwd backend ===
 {{Main|iwd}}
-NetworkManager supports wireless networks with [[iwd]] as backend, however, consider [https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues?scope=all&utf8=%E2%9C%93&state=opened&search=iwd existing issues] before using it.
+NetworkManager supports wireless networks with [[iwd]] daemon as backend, however, consider [https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues?scope=all&utf8=%E2%9C%93&state=opened&search=iwd existing issues] before using it.
+To use [[iwd]] as backend retain the NetworkManager's configuration file {{Path|/etc/NetworkManager/NetworkManager.conf}} as shown in [[#wpa_supplicant backend|previous section]] and modify that <code>[device]</code> section alone as follows: {{Cat|/etc/NetworkManager/NetworkManager.conf|...
+[device]
+wifi.backend{{=}}iwd
+wifi.iwd.autoconnect{{=}}yes}}
-Using both wireless daemons i.e [[Wi-Fi#wpa_supplicant|wpa_supplicant]] and [[iwd]] simultaneously lead to conflicts. Once iwd has been configured, ensure that [[Wi-Fi#Service_configuration|wpa_supplicant]] and related services are stopped before continuing. Start the iwd service and restart NetworkManager:
+Ensure that [[Wi-Fi#Service_configuration|wpa_supplicant]] and related services are stopped before continuing. Start the iwd service and restart NetworkManager:
 {{Cmd|<noWiki># rc-service iwd start
 # rc-service networkmanager restart</noWiki>}}
-To use [[iwd]] as backend edit NetworkManager's configuration because it still defaults to [[Wi-Fi#wpa_supplicant|wpa_supplicant]]. Edit the file {{Path|/etc/NetworkManager/NetworkManager.conf}} as follows: {{Cat|/etc/NetworkManager/NetworkManager.conf|[device]
-wifi.backend{{=}}iwd}}
-== NetworkManager and plasma ==
-{{Todo|([[KDE|KDE Plasma]] Desktop) find out if it is possible to prevent requesting the password for '''KDE Wallet''' on login}}
-{{Todo|([[KDE|KDE Plasma]] Desktop) for autoconnect to wifi network on start, it appears that the "all users may connect to this network" option must be selected in settings, as root is not a choice to allow. There are likely better workarounds}}
 == VPN support ==
@@ Line 87: / Line 75: @@
 NetworkManager has support for Wireguard and support for other VPN's are provided by plugins in the following subpackage:
 * {{Pkg|networkmanager-openvpn}} for OpenVPN
+== Plasma support ==
+{{Todo|([[KDE|KDE Plasma]] Desktop) find out if it is possible to prevent requesting the password for '''KDE Wallet''' on login}}
+{{Todo|([[KDE|KDE Plasma]] Desktop) for autoconnect to wifi network on start, it appears that the "all users may connect to this network" option must be selected in settings, as root is not a choice to allow. There are likely better workarounds}}
 == Troubleshooting ==
@@ Line 93: / Line 86: @@
 You can enable all users to edit connections without adding polkit.
-First, make the <code>conf.d</code> directory for networkmanager:
+First, make the <code>conf.d</code> directory for networkmanager: {{Cmd|# mkdir -p /etc/NetworkManager/conf.d}}
-{{Cmd|# mkdir -p /etc/NetworkManager/conf.d}}
 Then, add following content to {{path|/etc/NetworkManager/conf.d/any-user.conf}} so that {{cat|/etc/NetworkManager/conf.d/any-user.conf|[main]
@@ Line 101: / Line 92: @@
 Finally, restart networkmanager: {{Cmd|# rc-service networkmanager restart}}
+== See also ==
+* [[Configure Networking|Networking]] - Main page
+* [[Wifi#wpa_supplicant|wpa_supplicant]] - Default wifi daemon
+* [[Iwd|iwd]] - An alternate wifi daemon
 [[Category:Networking]]