{{Obsolete|Since 2014-04-09, Alpine has been shipping with {{Pkg|musl}} instead of [https://www.uclibc.org/ uclibc], as such, the instructions in this guide may be obsolete}}
If you want to run [https://www.gnu.org/software/libc/ glibc] programs in Alpine Linux, there are a few ways of doing so. You can install the [https://git.adelielinux.org/adelie/gcompat gcompat] compatibility layer, you can install glibc alongside [https://musl.libc.org/ musl] (manually, as it isn't packaged), or you could do it the easy way and use either Flatpak (the easiest), containers or a chroot.<br>
{{Draft}}
If you want to run [https://www.gnu.org/software/libc/ glibc] programs in Alpine Linux, there are a few ways of doing so. You could install glibc as additional to [https://uclibc.org/about.html uclibc] (you would have to do this manually), or you could do it the easy way and use a chroot.<br>
Because there are different use cases, this is just a slight overview about what's possible and what's intelligent.<br>
Because there are different use cases, this is just a slight overview about what's possible and what's sensible.<br>
= Your options =
= Your options =
== Using BusyBox ==
== gcompat ==
First, the simplest approach for setting up a chroot is by using a glibc build of [https://www.busybox.net/about.html BusyBox].
This approach has just a few downsides:-
* You have to link most <code>/bin/</code> and <code>/usr/bin</code> programs against <code>/bin/busybox</code>, and some BusyBox builds break if you don't configure them correctly.
* You have to manually download every library you need for your program manually.
However, if you want a small environment for one simple use case, then this is the solution you want.
gcompat is the go-to compatibility layer for Alpine users.
== Using a live CD ==
{{cmd|apk add {{pkg|gcompat}}}}
If you prefer using any special distro, you can always download and extract a live CD and use it as a chroot enviroment.
After that you run your binaries as normal.
== Using an image ==
== Flatpak ==
For Gentoo, it is the slowest approach especially on slow machines since it is not binary distribution and can be indecisive, but you have the advantage of controlling the package version of whichever library you will install. A drawback would be a big build. You have to install a Portage tree, which uses up a lot of space. (It's not 100% necessary if you don't have to install any additional content that you won't need.) Sometimes the package will fail on compilation phase of emerge. You either end up patching it yourself or waiting for a fix to appear on their Bugzilla from an experienced user.
Flatpak is by far the easiest method of running any graphical glibc program on Alpine.
Firstly install it.
For Arch or Debian, it is recommended since packages are precompiled and better at unattended package installation. This approach isn't as easily executed as the other alternatives, but this may be the cleanest and most recommended one for the every day user.
{{cmd|apk add {{pkg|flatpak}}}}
= How to do it =
Then you can run any Flatpak application:
This is just a quick draft, so here it comes.
{{cmd|flatpak run <flatpak name>}}
== Using BusyBox ==
It is recommended to enable [https://flathub.org Flathub] using its instructions [https://flatpak.org/setup/Alpine/ here], as most glibc programs you might need will be packaged there.
First, we need to download BusyBox. You can choose any of your favourite distros to download a prebuilt version. For instance, you could use Arch Linux [https://www.archlinux.org/packages/?q=busybox packages], as follows:
You can then install applications from it, for example:
This creates a simple chroot enviroment, which we will expand through all the commands included in BusyBox:
== Chroot ==
for i in $(busybox --list);do ln -s /bin/busybox /usr/bin/$i;done
An option that's easier to generalize to other glibc applications is installing a glibc-based distribution into a chroot. You can then either chroot into it, or use a symlink and some configuration to make its glibc (and associated libraries) usable from Alpine.
After setting up a chroot using any of the methods described below, the loader can be set up in Alpine like so (these instructions are for a Debian chroot in /var/chroots/debian, on x86_64, but can be adapted to other systems by using the appropriate paths):
You also may need the vanilla kernel. If any time Gentoo decides to update PAM, you need it for it to emerge successfully without problems.
sudo apk add kernel-vanilla
Add the kernel-vanilla to Grub and reboot with the vanilla kernel if you are going to pull in both git and layman which they use to download user community supported packages.
Enter the chroot:
Enter the chroot:
mkdir ~/chroot
{{cmd|mkdir ~/chroot
cd ~/chroot
cd ~/chroot
tar -xvf stage3-*.tar.xz
tar -xvf stage3-*.tar.xz
tar -xvf portage-latest.tar.xz
tar -xvf portage-latest.tar.xz
mv portage usr
mv portage usr
sudo mount --bind /dev dev
doas mount --bind /dev dev
sudo mount --bind /sys sys
doas mount --bind /sys sys
sudo mount -t proc proc proc
doas mount -t proc proc proc
cp /etc/resolv.conf etc
cp /etc/resolv.conf etc
sudo chroot . /bin/bash
doas chroot . /bin/bash}}
And voilà, you have your working Gentoo chroot!<br>
And voilà, you have your working Gentoo chroot!<br>
Line 98:
Line 72:
CHROOT_PATH="/home/$USER/chroot"
CHROOT_PATH="/home/$USER/chroot"
cd $CHROOT_PATH
cd $CHROOT_PATH
mount | grep $CHROOT_PATH/dev || sudo mount --bind /dev dev
mount | grep $CHROOT_PATH/dev || doas mount --bind /dev dev
mount | grep $CHROOT_PATH/sys || sudo mount --bind /sys sys
mount | grep $CHROOT_PATH/sys || doas mount --bind /sys sys
mount | grep $CHROOT_PATH/proc || sudo mount -t proc proc proc
mount | grep $CHROOT_PATH/proc || doas mount -t proc proc proc
cp /etc/resolv.conf etc
cp /etc/resolv.conf etc
sudo chroot --userspec=$USER:users . /bin/bash
doas chroot --userspec=$USER:users . /bin/bash
echo "You must manually unmount $CHROOT_PATH/dev, $CHROOT_PATH/sys, $CHROOT_PATH/proc."
echo "You must manually unmount $CHROOT_PATH/dev, $CHROOT_PATH/sys, $CHROOT_PATH/proc."
</nowiki>
</nowiki>
Line 113:
Line 87:
Either use '''pacstrap''' (included with the arch-install-scripts package) or an Arch bootstrap image:
Either use '''pacstrap''' (included with the arch-install-scripts package) or an Arch bootstrap image:
for i in /proc/sys/kernel/grsecurity/chroot_*; do echo 1 | sudo tee $i; done
for i in /proc/sys/kernel/grsecurity/chroot_*; do echo 1 | sudo tee $i; done
sudo chroot ~/chroot /bin/bash
sudo chroot ~/chroot /bin/bash
Line 142:
Line 116:
You can now use <code>apt-get</code> to install needed packages.
You can now use <code>apt-get</code> to install needed packages.
== Examples ==
== Containers ==
=== Source dedicated server ===
Here is an easy example of how you can run [http://www.srcds.com srcds] in a simple BusyBox chroot.
For this server, you will only need the basic chroot and an advanced tar version (the BusyBox version is not sufficient because of the missing -U command):
cp /bin/tar . #right now executing programs from $PATH is buggy, soon to be fixed (no bug in BusyBox, but in my script)
./hdsupdatetool.bin #you can accept it or not ;)
./steam
./steam
...and you should have a working chroot with '''srcds''' installed in it.
If you think you are clever or elegant, you can use the server with a bash script:
#!/bin/bash
chroot ~/chroot /root/work/steam $@
Just save it (in your Alpine installation) under <code>/usr/bin/steam</code>, do a <code>chmod +x /usr/bin/steam</code> and have fun!
{{Warning|This script would let '''Steam''' run with root priviliges. This is not recommended.}}
=== MegaCli ===
So let's run [https://wikitech.wikimedia.org/wiki/MegaCli MegaCli] in a chroot too, shall we? ;)
It's also possible to use Docker or Podman containers with a helper like Distrobox. This allows using graphical programs easily and doesn't require root privileges once set up.
First we set up a uclibc chroot :)
{{cmd|# apk add {{pkg|distrobox}}}}
'''MegaCli''' needs more than just glibc. It needs [https://www.gnu.org/software/ncurses/ ncurses] and the gcc-libs:
After this, we visit [http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/8.02.16_MegaCLI.zip this] site and download '''8.02.16_MegaCLI.zip'''.
Then set up rootless Podman, following [[Podman|these steps]].
You'll need to mount your root as shared for Distrobox to function.
mkdir tmp
Fill in {{path|/etc/local.d/mount-rshared.start}} like so:
cd tmp
unzip ../8.02.16_MegaCLI.zip
cd LINUX
unzip MegaCliLin.zip
#Now comes code stolen from rpm2cpio
o=`expr 96 + 8`
set `od -j $o -N 8 -t u1 MegaCli-8.02.16-1.i386.rpm`
#we may need dev and maybe proc too to use this program
chroot ~/chroot /opt/MegaRAID/MegaCli/MegaCli $@
umount ~/chroot/proc
umount ~/chroot/dev
umount ~/chroot/sys
Save it under <code>/usr/bin/MegaCli</code>. Do a <code>chmod +x /usr/bin/MegaCli</code> and good luck.
Then autostart its service.
Note: This method takes around 50mb. If you need something smaller, then you can strip a few files from glibc (not recommended), or work on a squashfs.
{{cmd|# rc-update add local default
# rc-service local start}}
With the following, you can create a squashfs that is around 15mb small:
Finally you can create a container using your chosen image.
mksquashfs ~/chroot/ /chroot.sfs -b 65536
When you add a [https://en.wikipedia.org/wiki/UnionFS unionfs] layer, you can even use it with write access, or you can bind some directories to the writeable directories before you chroot into it.
It may also be necessary to allow X authorization for GUI programs to work.
You can save the chroot in another directory than your home directory, and you can even install a chroot through an APKBUILD (after someone wrote it).
{{cmd|$ xhost +si:localuser:$USER}}
With this, you could use many glibc-dependent programs through one chroot, but be aware that running programs like this should not be standard. This should only be used in extreme situations, as in _closed source_ tools linked against glibc.
== Chroot + Bubblewrap ==
=== Skype on Debian chroot ===
It's also possible to use a Debian system chroot with Bubblewrap. This allows running programs without root.
Mount needed directories in the chroot read-only to limit access to the system devices.
Give write access to <code>/dev/v4l</code> and to <code>/dev/snd</code> in order to let Skype use the webcam device: Skype is not compatible with Alsa anymore and requires Pulseaudio to be running.
sudo mount -o bind /proc ~/chroot/proc
sudo mount -o bind,ro,remount /proc ~/chroot/proc
sudo mount -o bind /sys ~/chroot/sys
sudo mount -o bind,ro,remount /sys ~/chroot/sys
sudo mount -o bind /dev ~/chroot/dev
sudo mount -o bind,ro,remount /dev ~/chroot/dev
sudo mount -o bind /dev/v4l ~/chroot/dev/v4l
sudo mount -t tmpfs -o nodev,nosuid,noexec shm $CHROOT_PATH/dev/shm
A separate user can also be created to run the game, if preferred.
=== Spotify ===
==== Docker method ====
Read the [[Docker]] page to install it. Then clone the repository, as shown below. It will automate the process of pulling all the dependencies, and '''PaX''' marks it for the hardened kernel. The advantage of this container is that it is ready-to-use and has stripped down many of the <code>/usr/bin</code> executables. The downside is that is unstable.
Follow the instructions in the <code>README.md</code>
==== Chroot method ====
The Chroot method the preferred method; it doesn't have the black screen bug and is more stable. Just translate the [https://github.com/orsonteodoro/docker-arch-spotify-PaXmarked/blob/master/Dockerfile Dockerfile instructions] into native '''sh''' (Bourne shell). The trick again is to run Spotify as root with sudo inside the chroot – not as regular user.
Use <code>sudo aplay -l</code> to verify that the soundcard is detected. When you use either this or the Docker method, which relies on ALSA, there could be a conflict depending on who grabs the sound card. Stop all browsers or programs using the sound device outside of the chroot or the docker image so that Spotify can use it.
I did some translation. You may need to make changes.
To update, just delete it and call <code>alpine-spotify-installer.sh</code> again. You will still need the Arch Linux bootstrap image. Extract the image. Next, copy and paste the code shown below into root.x86_64; <code>chmod +x alpine-spotify-installer.sh</code>. Then, run <code>sudo arch-chroot root.x86_64</code>. Then, run <code>./alpine-spotify-installer.sh</code>.
If it shows <code>(spotify:4): Gtk-WARNING **: cannot open display: :0.0</code> Before running Spotify try:
In this case you might need to use xhost to allow local connections, e.g.:
{{cmd|# xhost + local:}}
xhost +local:
Now we can invoke glibc-built binaries like so:
{{cmd|$ glibc ./binary}} or {{cmd|$ glibcX11 ./binary}}
You could insert it at the very top in the above wrapper script.
For updating the Chroot or installing dependencies we can mount it and then login as root:
{{cmd|# mount --bind /dev /var/chroots/debian/dev
# mount --bind /proc /var/chroots/debian/proc
# chroot /var/chroots/debian /bin/bash
# apt update && apt upgrade}}
You may want to look at [https://github.com/orsonteodoro/docker-arch-spotify-PaXmarked/blob/master/deflate.sh this script] to learn how to lock it down by removing the unnecessary cruft in your chroot collections that may be abused.
After installing what you might want to umount the binds for dev and proc to avoid issues.
{{cmd|# umount /var/chroots/debian/dev}}
{{cmd|# umount /var/chroots/debian/proc}}
[[Category:Development]]
[[Category:Development]]
[[Category:Installation]]
[[Category:Installation]]
Latest revision as of 14:11, 30 October 2024
If you want to run glibc programs in Alpine Linux, there are a few ways of doing so. You can install the gcompat compatibility layer, you can install glibc alongside musl (manually, as it isn't packaged), or you could do it the easy way and use either Flatpak (the easiest), containers or a chroot.
Because there are different use cases, this is just a slight overview about what's possible and what's sensible.
Your options
gcompat
gcompat is the go-to compatibility layer for Alpine users.
It is recommended to enable Flathub using its instructions here, as most glibc programs you might need will be packaged there.
You can then install applications from it, for example:
flatpak install com.valvesoftware.Steam
Chroot
An option that's easier to generalize to other glibc applications is installing a glibc-based distribution into a chroot. You can then either chroot into it, or use a symlink and some configuration to make its glibc (and associated libraries) usable from Alpine.
After setting up a chroot using any of the methods described below, the loader can be set up in Alpine like so (these instructions are for a Debian chroot in /var/chroots/debian, on x86_64, but can be adapted to other systems by using the appropriate paths):
mkdir ~/chroot
cd ~/chroot
tar -xvf stage3-*.tar.xz
tar -xvf portage-latest.tar.xz
mv portage usr
doas mount --bind /dev dev
doas mount --bind /sys sys
doas mount -t proc proc proc
cp /etc/resolv.conf etc
doas chroot . /bin/bash
And voilà, you have your working Gentoo chroot!
You can now take a look at Gentoo's Handbook to find out how you can configure and install your system, or simply extract/copy the program you need to run in your chroot enviroment and execute it.
Here is a wrapper script that is similar to arch-chroot when you frequently reuse this chroot:
Also, create an account with the same user name as host current user to the chroot or make changes to the userspec option to chroot line.
Contents of gentoo-chroot.sh
!/bin/bash
CHROOT_PATH="/home/$USER/chroot"
cd $CHROOT_PATH
mount | grep $CHROOT_PATH/dev || doas mount --bind /dev dev
mount | grep $CHROOT_PATH/sys || doas mount --bind /sys sys
mount | grep $CHROOT_PATH/proc || doas mount -t proc proc proc
cp /etc/resolv.conf etc
doas chroot --userspec=$USER:users . /bin/bash
echo "You must manually unmount $CHROOT_PATH/dev, $CHROOT_PATH/sys, $CHROOT_PATH/proc."
Do at chmod +x gentoo-chroot.sh to get it to work.
Arch Linux
Either use pacstrap (included with the arch-install-scripts package) or an Arch bootstrap image:
doas apk add arch-install-scripts
mkdir ~/chroot && cd ~/chroot
curl -O https://mirrors.edge.kernel.org/archlinux/iso/latest/archlinux-bootstrap-x86_64.tar.gz
doas tar xzf archlinux-bootstrap-x86_64.tar.gz && rm archlinux-bootstrap-x86_64.tar.gz
doas sed -i '/evowise/s/^#//' root.x86_64/etc/pacman.d/mirrorlist
doas sed -i '/CheckSpace/s/^/#/' root.x86_64/etc/pacman.conf
doas arch-chroot root.x86_64
[chroot]# pacman-key --init
[chroot]# pacman-key --populate archlinux
Once that is done, update the system and install the desired package(s) (denoted by "foo" in this example):
[chroot]# pacman -Syu foo
Debian
Todo: gresec referencs need to be cleanly removed from this section.
Use the provided debootstrap package to create the Debian chroot. --arch is optional, depending of your needs.
On the linux-grsec kernel, you will need to relax chroot limitations:
sudo apk add debootstrap
for i in /proc/sys/kernel/grsecurity/chroot_*; do echo 0 | sudo tee $i; done
mkdir ~/chroot
sudo debootstrap --arch=i386 wheezy ~/chroot https://deb.debian.org/debian/
for i in /proc/sys/kernel/grsecurity/chroot_*; do echo 1 | sudo tee $i; done
sudo chroot ~/chroot /bin/bash
You can now use apt-get to install needed packages.
Containers
It's also possible to use Docker or Podman containers with a helper like Distrobox. This allows using graphical programs easily and doesn't require root privileges once set up.
