Zabbix: Difference between revisions

From Alpine Linux
(Revert Zabbix to pre cgi+mysql; add link to Zabbix+cgi+mysql)
 
(values in /etc/php82/php.ini are all lowercase)
 
(6 intermediate revisions by 5 users not shown)
Line 1: Line 1:
The purpose of this document is to assist in installing the Zabbix server software and Zabbix agent on the Alpine Linux operating system. Instructions on how to configure and use Zabbix - as well as many useful tutorials - can be found at http://www.zabbix.com.
The purpose of this document is to assist in installing the Zabbix server software and Zabbix agent on the Alpine Linux operating system. Instructions on how to configure and use Zabbix - as well as many useful tutorials - can be found at https://www.zabbix.com.


{{Note|The minimum required version of Alpine Linux required to install Zabbix is Alpine 2.2. this guide has been updated to zabbix 3.0}}
{{Note|The minimum required version of Alpine Linux required to install Zabbix is Alpine 2.2. this guide has been updated to zabbix 3.0}}
 
{{Note|There is an alternate set of instructions here [[Zabbix_-_cgi_and_mysql]].}}


= Install Lighttpd, and PHP =
= Install Lighttpd, and PHP =
Line 9: Line 9:


For Zabbix you will have to install following two extra packages otherwise Zabbix will not run.
For Zabbix you will have to install following two extra packages otherwise Zabbix will not run.
1.  php7-mbstring  2. php7-pgsql
1.  php82-mbstring  2. php82-pgsql


To Install these two packages   
To Install these two packages   
{{Cmd|apk add php7-mbstring php7-pgsql}}
{{Cmd|apk add php82-mbstring php82-pgsql}}
= Configure PostgreSQL =
= Configure PostgreSQL =


Line 20: Line 20:


Now configure PostgreSQL:
Now configure PostgreSQL:
{{Cmd|/etc/init.d/postgresql setup
{{Cmd|rc-service postgresql setup
/etc/init.d/postgresql start
rc-service postgresql start
rc-update add postgresql}}
rc-update add postgresql}}
After installing Postgres and running rc-service postgresql setup I got an error:
{{Cmd|initdb: error: could not access directory "/var/lib/postgresql/16/data": Permission denied
mv: can't rename '/var/lib/postgresql/16/data/postgresql.conf': No such file or directory
mv: can't rename '/var/lib/postgresql/16/data/pg_hba.conf': No such file or directory
mv: can't rename '/var/lib/postgresql/16/data/pg_ident.conf': No such file or directory
$: sudo ls -l /var/lib/postgresql/
total 4
drwxr-x---    3 root    root          4096 Mar 19 11:27 16}}
I had to change the ownership of /var/lib/postgresql/16
{{Cmd|sudo chown postgres:postgres /var/lib/postgresql/16}}


= Install Zabbix =
= Install Zabbix =
Line 44: Line 58:
ln -s /usr/share/webapps/zabbix /var/www/localhost/htdocs}}
ln -s /usr/share/webapps/zabbix /var/www/localhost/htdocs}}


Edit PHP configuration to satisfy some zabbix requirements. Edit /etc/php7/php.ini and configure the following values at least:
Edit PHP configuration to satisfy some zabbix requirements. Edit /etc/php82/php.ini and configure the following values at least:


<pre>
<pre>
Max_execution_time = 600
max_execution_time = 600
Expose_php = Off
expose_php = Off
Date.timezone = <insert your timezone here>
date.timezone = <insert your timezone here>
post_max_size = 32M
post_max_size = 32M
upload_max_filesize = 16M
upload_max_filesize = 16M
Line 78: Line 92:


{{Cmd|rc-update add zabbix-server
{{Cmd|rc-update add zabbix-server
/etc/init.d/zabbix-server start}}
rc-service zabbix-server start}}


Fix permissions on conf directory.
Fix permissions on conf directory.
Line 84: Line 98:
{{Cmd|chown -R lighttpd /usr/share/webapps/zabbix/conf}}
{{Cmd|chown -R lighttpd /usr/share/webapps/zabbix/conf}}


You should now be able to browse to the Zabbix frontend: http://yourservername/.
You should now be able to browse to the Zabbix frontend: <nowiki>http://yourservername/</nowiki>.


or
or


You should now be able to browse to the Zabbix setup frontend: http://yourserverip/instal.php.
You should now be able to browse to the Zabbix setup frontend: <nowiki>http://yourserverip/instal.php</nowiki>.


Follow the setup instructions to configure Zabbix, supplying the database information used above.
Follow the setup instructions to configure Zabbix, supplying the database information used above.


After setup, login using: Login name: '''Admin''' Password:'''zabbix'''. (as described at http://www.zabbix.com/documentation/1.8/manual/installation)
After setup, login using: Login name: '''Admin''' Password:'''zabbix'''. (as described at https://www.zabbix.com/documentation/current/en/manual/installation)


Finally, Zabbix requires special permissions to use the fping binary.
Finally, Zabbix requires special permissions to use the fping binary.
Line 122: Line 136:


{{Cmd|rc-update add zabbix-agentd
{{Cmd|rc-update add zabbix-agentd
/etc/init.d/zabbix-agentd start}}
rc-service zabbix-agentd start}}


In case you want to monitor using SNMP agent on remote machines you have to add these packages on zabbix server:
In case you want to monitor using SNMP agent on remote machines you have to add these packages on zabbix server:

Latest revision as of 16:58, 19 March 2024

The purpose of this document is to assist in installing the Zabbix server software and Zabbix agent on the Alpine Linux operating system. Instructions on how to configure and use Zabbix - as well as many useful tutorials - can be found at https://www.zabbix.com.

Note: The minimum required version of Alpine Linux required to install Zabbix is Alpine 2.2. this guide has been updated to zabbix 3.0
Note: There is an alternate set of instructions here Zabbix_-_cgi_and_mysql.

Install Lighttpd, and PHP

Basic Installation

For installing the additional packages first activate community packages and update the package index

Install the required packages:

# apk add lighttpd php82 fcgi php82-cgi

Configure Lighttpd

Edit lighttpd.conf (/etc/lighttpd/lighttpd.conf) and uncomment the line:

Contents of /etc/lighttpd/lighttpd.conf

... include "mod_fastcgi.conf" ...

Edit mod_fastcgi.conf (/etc/lighttpd/mod_fastcgi.conf), find and change /usr/bin/php-cgi to /usr/bin/php-cgi82.

Contents of /etc/lighttpd/mod_fastcgi.conf

... "bin-path" => "/usr/bin/php-cgi82" # php-cgi ...

Start lighttpd service and add it to default runlevel

# rc-service lighttpd start # rc-update add lighttpd default

For Zabbix you will have to install following two extra packages otherwise Zabbix will not run. 1. php82-mbstring 2. php82-pgsql

To Install these two packages

apk add php82-mbstring php82-pgsql

Configure PostgreSQL

Install PostgreSQL

apk add postgresql postgresql-client

Now configure PostgreSQL:

rc-service postgresql setup rc-service postgresql start rc-update add postgresql


After installing Postgres and running rc-service postgresql setup I got an error:

initdb: error: could not access directory "/var/lib/postgresql/16/data": Permission denied mv: can't rename '/var/lib/postgresql/16/data/postgresql.conf': No such file or directory mv: can't rename '/var/lib/postgresql/16/data/pg_hba.conf': No such file or directory mv: can't rename '/var/lib/postgresql/16/data/pg_ident.conf': No such file or directory $: sudo ls -l /var/lib/postgresql/ total 4 drwxr-x--- 3 root root 4096 Mar 19 11:27 16

I had to change the ownership of /var/lib/postgresql/16

sudo chown postgres:postgres /var/lib/postgresql/16

Install Zabbix

apk add zabbix zabbix-pgsql zabbix-webif zabbix-setup

Now we need to set up the zabbix database. Substitute '*********' in the example below for a real password:

psql -U postgres postgres=# create user zabbix with password '*********'; postgres=# create database zabbix owner zabbix; postgres=# \q cd /usr/share/zabbix/database/postgresql cat schema.sql | psql -U zabbix zabbix cat images.sql | psql -U zabbix zabbix cat data.sql | psql -U zabbix zabbix

Create a softlink for the Zabbix web-frontend files:

rm /var/www/localhost/htdocs -R ln -s /usr/share/webapps/zabbix /var/www/localhost/htdocs

Edit PHP configuration to satisfy some zabbix requirements. Edit /etc/php82/php.ini and configure the following values at least:

max_execution_time = 600
expose_php = Off
date.timezone = <insert your timezone here>
post_max_size = 32M
upload_max_filesize = 16M
max_input_time = 600
memory_limit = 256M

Also comment (doc_root & user_dir ) by putting # before these.

Configure the following entries in /etc/zabbix/zabbix_server.conf, where DBPassword is the password chosen for the database above:

DBName=zabbix

# Database user

DBUser=zabbix

# Database password
# Comment this line if no password used

DBPassword=*********

FpingLocation=/usr/sbin/fping

Start Zabbix server:

rc-update add zabbix-server rc-service zabbix-server start

Fix permissions on conf directory.

chown -R lighttpd /usr/share/webapps/zabbix/conf

You should now be able to browse to the Zabbix frontend: http://yourservername/.

or

You should now be able to browse to the Zabbix setup frontend: http://yourserverip/instal.php.

Follow the setup instructions to configure Zabbix, supplying the database information used above.

After setup, login using: Login name: Admin Password:zabbix. (as described at https://www.zabbix.com/documentation/current/en/manual/installation)

Finally, Zabbix requires special permissions to use the fping binary.

chmod u+s /usr/sbin/fping

Install Zabbix Agent on Monitored Servers

Zabbix can monitor almost any operating system, including Alpine Linux hosts. Complete the following steps to install the Zabbix agent on Alpine Linux.

Note: Support to allow zabbix-agentd to view running processes on Alpine Linux has been added since linux-grsec-2.6.35.9-r2. Please ensure you have that kernel installed prior to attempting to run zabbix-agentd.

Ensure that the readproc group exists (support added since alpine-baselayout-2.0_rc1-r1), by adding the following line to /etc/group:

readproc:x:30:zabbix

Install the agent package:

apk add zabbix-agent

Edit the /etc/zabbix/zabbix_agentd.conf file and configure at least the following option:

Server=<ip or hostname of zabbix server>
Hostname=<ip or hostname of zabbix agent>
ListenPort=10050

Start the zabbix-agent:

rc-update add zabbix-agentd rc-service zabbix-agentd start

In case you want to monitor using SNMP agent on remote machines you have to add these packages on zabbix server:

apk add net-snmp net-snmp-tools

And add these packages on remote machines:

apk add net-snmp


Optional: Crash course in adding hosts, checks, and notifications

Note: This is optional since it's not specific to Alpine Linux, but I wanted a couple notes for how to perform a simple check on a server that doesn't have the agent installed on it, and be notified on state changes.

Administration -> Media Types -> Email

  • Setup server, helo, email from address

Administration -> Users

  • Setup each user who'll get notified, make sure they have media type "Email" added with their address

Configuration -> Hosts -> Create host

  • In Linux Servers hostgroup
  • Define dns name, ip, connect by IP
  • If the machine is a simple networking device that will only be monitored using SNMP, add it to Template_SNMPv2_Device, and you're done.

Configuration -> Templates -> Create template

  • Give it a name (Template_Alpine_Linux_Infra_HTTP)
  • In Templates group

Configuration -> Templates -> Template_Alpine_Linux_Infra_HTTP -> Items

  • Create Item
  • Host: Template_Alpine_Linux_Infra_HTTP
  • Description: HTTP Basic Check
  • Type: Simple_check
  • Key: http,80

Configuration -> Templates -> Template_Alpine_Linux_Infra_HTTP -> Triggers

  • Create Trigger
  • Name: "HTTP Trigger"
  • Expression: {Template_Alpine_Linux_Infra_HTTP:http,80.last(0)}#1
  • Severity: High

Configuration -> Actions ->

  • Create Action
  • name: Email notifications
  • Event source: triggers
  • Default Subject: add "{HOST.DNS}:" to the beginning
  • Default message: add "{HOST.DNS}:" to the beginning
  • Conditions: make host have to be from "Linux Servers" hostgroup, and Template_Alpine_Linux_Infra_HTTP:HTTP trigger" is not 1
  • Email affected users