PipeWire

From Alpine Linux
Revision as of 18:43, 23 December 2022 by Ermine (talk | contribs) (→‎Running: Fix typo in the command)
This material is work-in-progress ...

The instructions below have not been thoroughly tested and may break things.
(Last edited by Ermine on 23 Dec 2022.)

PipeWire is a multimedia processing engine that aims to improve audio and video handling on Linux.

Prerequisites

Device access

PipeWire needs proper permissions to access devices. If you do not use elogind, your user should be in audio and video groups:

# addgroup <user> audio
# addgroup <user> video

Make sure to re-login for these changes to take effect.

D-Bus

PipeWire optionally requires a running D-Bus system and/or session bus for some of its functionality.

For certain configurations (e.g. only audio playback and recording) D-Bus setup is not necessary. Edit configuration files to disable D-Bus support.

XDG_RUNTIME_DIR

If you are not using a Desktop Manager, ensure that your XDG_RUNTIME_DIR is set to a user-writable location. By default for pulseaudio this is /run/user/1000/ or /tmp. If this is not set, pipewire will create a directory in your home folder instead, called ~/pulse, and on attempting to run Pavucontrol or pactl, you will get the following error:

$ pactl list
Connection failure: Connection refused
pa_context_connect() failed: Connection refused

Installation

Install the pipewire package.

Session Manager

PipeWire delegates plumbing work to session manager. There are two options available:

  • WirePlumber. It has modular design and supports Lua plugins. This is the recommended session manager. If you do not know which session manager you need, use WirePlumber.
    Package: wireplumber
  • pipewire-media-session. It is much more simpler and covers only basic use cases. It was used for testing purposes. Now it does not make much sense since WirePlumber is available.
    Package: pipewire-media-session
Note: This page assumes that you are using WirePlumber.

PulseAudio compatibility

Install pipewire-pulse package, which provides a daemon so PulseAudio applications could use PipeWire as backend.

JACK compatibility

Install pipewire-jack package, which provides ABI-compatible libraries for JACK applications.

ALSA support

Install pipewire-alsa package.

Configuration

PipeWire and WirePlumber store their default configuration in /usr/share/pipewire and /usr/share/wireplumber respectively. If you want to edit the configuration, you need to move it to /etc:

# cp -a /usr/share/pipewire /etc
# cp -a /usr/share/wireplumber /etc

Disable D-Bus support

Edit the following configuration parameters:

/etc/pipewire/pipewire.conf

context.properties = {
    ... 
    support.dbus = false
}

/etc/wireplumber/wireplumber.conf

context.properties = {
    ... 
    support.dbus = false
}

/etc/wireplumber/bluetooth.lua.d/50-bluez-config.lua

bluez_monitor.properties = {
  ...
  ["with-logind"] = false,
}

/etc/wireplumber/main.lua.d/50-alsa-config.lua

alsa_monitor.properties = {
  ...
  ["alsa.reserve"] = false,
}

/etc/wireplumber/main.lua.d/50-default-access-config.lua

default_access.properties = {
  ...
  ["enable-flatpak-portal"] = false,
}

Realtime scheduling

For realtime scheduling, it is recommended to use rtkit. Add your user to the rtkit group.

Alternatively, ensure your user has the right ulimit permissions. You generally need (limits.conf format):

@audio - memlock 256
@audio - nice -11
@audio - rtprio 88

This allows a member of the audio group to have the right permissions for PipeWire to use realtime scheduling without rtkit.

Video

Video should work out-of-the-box with v4l2 devices (e.g. a lot of webcams) and GStreamer applications.

Bluetooth audio

  • Enable PulseAudio support as described above
  • Install bluetooth service packages: bluez bluez-openrc pipewire-spa-bluez
  • Optional: install GUI manager for bluetooth blueman
  • Enable and start bluetooth service: rc-update add bluetooth; rc-service bluetooth start
  • Restart PipeWire
  • Use commandline program bluetoothctl or GUI program blueman-manager to scan and pair bluetooth audio devices.
  • Use pavucontrol to adjust volume and manually select high definition bluetooth codecs.

Screen sharing on Wayland

You will need the right xdg-desktop-portal backend for your desktop environment. Screen sharing is known to work on:

  • GNOME with xdg-desktop-portal-gtk
  • KDE Plasma with xdg-desktop-portal-kde and Firefox
  • Sway with xdg-desktop-portal-wlr and Firefox, see Sway for details

Running

Note: pipewire-launcher script is provided by Alpine Linux, not by upstream. Please report issues to Alpine Linux maintainers first.

Start the PipeWire media server. You'll probably get quite a few errors but just ignore them for now.

$ /usr/libexec/pipewire-launcher

If you do not have D-Bus session bus running (e.g. you are in tty or you are using minimalistic DE or window manager which does not launch D-Bus session) and you did not disable D-Bus in PipeWire configuration, use dbus-launch:

$ dbus-launch /usr/libexec/pipewire-launcher
Note: PipeWire doesn't auto-start a session manager anymore. In 3.14 and earlier, the PipeWire default config was edited in packaging to auto-start pipewire-media-session as the default session manager. Since we now have wireplumber available as an alternative session manager, this has been changed in favor of a launch wrapper for pipewire at /usr/libexec/pipewire-launcher. When executed, this will launch pipewire, pipewire-media-session or wireplumber, and pipewire-pulse, depending on what modules are available. If you were launching /usr/bin/pipewire and the session manager manually before, please use the new launcher wrapper instead. WirePlumber can now also be used as a proper alternative for pipewire-media-session.

Auto launching

You can add /usr/libexec/pipewire-launcher to your .xinitrc.

If you do not use GUI by default and have D-Bus enabled in configuration, add the following stanza to your shell configuration file:

export $(dbus-launch)
/usr/libexec/pipewire-launcher

Testing

In a different terminal window check the default output device. I don't yet know how this default can be changed for all applications, so you'd better hope it's right!

WirePlumber

$ wpctl status

pw-cat playback

Test sound is working using an audio file in a format supported by libsndfile (e.g. flac, opus, ogg, wav). Use pw-cat utility from pipewire-tools:

$ pw-cat -p test.flac

pw-cat recording

If you have a microphone test audio recording is working.

$ pw-cat -r --list-targets
$ pw-cat -r recording.flac
(Speak for a while then stop it with Ctrl+c)
$ pw-cat -p recording.flac

PulseAudio

Test PulseAudio clients using a media player, as most use PulseAudio.

JACK

Use jack_simple_client from jack-simple-clients:

$ jack_simple_client

You should hear a sustained beep.

Troubleshooting

`wpctl status` shows no targets

First, check whether ALSA knows about your sound card:

aplay -l

If sound devices are found, the issue is with your pipewire configuration. Consider double-checking the instructions above.

Otherwise, your sound card may not be supported in the version of the Linux Kernel you're running. You should search online for fixes relating to your current kernel version and the codec of your sound card. You can find each of these with:

uname -r
cat /proc/asound/card0/codec* | grep Codec

Error acquiring bus address: Cannot autolaunch D-Bus without X11 $DISPLAY

This means D-Bus session bus is not started and GUI is not active (i.e. you are in a tty). Use dbus-launch as outlined above. Alternatively, disable D-Bus support.

Quick Configuration

You might want to use pavucontrol to have a simple GUI app for controlling sound, outputs, etc.

See Also