LXC: Difference between revisions

From Alpine Linux
(→‎Installation: need bash in addition)
(replace /etc/init.d with rc-service)
 
(89 intermediate revisions by 23 users not shown)
Line 1: Line 1:
Linux Containers (LXC) provides containers similar BSD Jails, Linux VServer and Solaris Zones. It gives the impression of virtualization, but shares the kernel and resources with the "host".
[https://linuxcontainers.org/ Linux Containers (LXC)] provides containers similar to BSD Jails, Linux VServers and Solaris Zones. It gives the impression of virtualization, but shares the kernel and resources with the "host". You can use lxc directly or through [[LXD]].


== Installation ==
== Installation ==
Install the required packages:
Install the required packages:
{{Cmd|apk add lxc bridge bash}}
{{Cmd|apk add lxc bridge lxcfs lxc-download xz}}
 
If you want to create containers other than Alpine, you'll need lxc-templates:
 
{{Cmd|apk add lxc-templates}}
 
== Upgrading from 2.x ==
 
Starting with Alpine 3.9, we ship LXC version 3.1.
LXC 3.x has major changes which can and will break your current setup.
LXC 3.x will NOT ship with legacy container templates. Check your current container configs to see if you have any includes pointing to files that don't exist (shipped by legacy templates).
For example if you use Alpine containers created with the Alpine template, you'll need to install:
 
apk add lxc-templates-legacy-alpine
 
Also make sure you convert your LXC config files to the new 2.x format (this is now required).
 
lxc-update-config -c /var/lib/lxc/container-name/config
 
Make sure you have removed '''cgroup_enable''' from your cmdline as this will fail to mount cgroups and fail LXC service.


== Prepare network on host ==
== Prepare network on host ==
Set up a [[bridge]] on the host. Example ''/etc/network/interfaces'':
Install the {{Pkg|lxc-bridge}} package to create the <code>lxcbr0</code> bridge and configure the forwarding routes using iptables
<pre>
 
auto br0
apk add lxc-bridge iptables
iface br0 inet dhcp
 
    bridge-ports eth0
Enable the dnsmasq [[OpenRC]] service at boot and start it
 
rc-update add dnsmasq.lxcbr0 boot
service dnsmasq.lxcbr0 start
 
If you dont want to forward the routes, add <code>DISABLE_IPTABLES="yes"</code> to the /etc/conf.d/dnsmasq.lxcbr0 file
 
=== Assign static IP for a container ===
 
Using the dnsmasq method you can leave the container interface asking for DHCP as it is. You will just need to set the DHCP server asnwers.
 
By editing the file /etc/lxc/dnsmasq.conf and add the hostname (container name) and desired ip


</pre>
  dhcp-host=guest1,10.0.3.4
  dhcp-host=guest2,10.0.3.5


Create a network configuration template for the guests, ''/etc/lxc/lxc.conf'':
Restart the service
<pre>
lxc.network.type = veth
lxc.network.link = br0
lxc.network.flags = up


</pre>
  service dnsmasq.lxcbr0 restart


== Create a guest ==
== Create a guest ==
{{Cmd|lxc-create -n guest1 -f /etc/lxc/lxc.conf -t alpine}}
 
=== Picking from the list ===
 
{{Cmd|lxc-create -n guest1 -f /etc/lxc/default.conf -t download}}
 
And just pick from the list. lxc-download and xz can be uninstalled after you are done.
 
=== Alpine Template ===
 
{{Cmd|lxc-create -n guest1 -f /etc/lxc/default.conf -t alpine}}


This will create a ''/var/lib/lxc/guest1'' directory with a ''config'' file and a ''rootfs'' directory.
This will create a ''/var/lib/lxc/guest1'' directory with a ''config'' file and a ''rootfs'' directory.
Note: by default, the alpine template '''does not have networking service on''', you will need to add it using lxc-console
If running on x64 compatible hardware, it is possible to create a 32bit guest:
{{Cmd|lxc-create -n guest1 -f /etc/lxc/default.conf -t alpine -- --arch x86}}
=== Debian template ===
In order to create a debian template container you'll need to install some packages:
{{Cmd|apk add debootstrap rsync}}
You'll need to turn off some grsecurity chroot options otherwise the debootstrap will fail:
{{Cmd|echo 0 > /proc/sys/kernel/grsecurity/chroot_caps
echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chroot
echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mount
echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mknod
echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chmod
}}
Remember to turn them back on, or simply reboot.
Now you can run:
{{Cmd|SUITE{{=}}wheezy lxc-create -n guest1 -f /etc/lxc/default.conf -t debian}}
==== Setting a static IP  ====
Since Debian Bullseye 11.3 you can't assign a static IP address using the lxc config file of the container [https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1009351 because of a systemd change].
To make it work with a configuration like the following
# grep net /var/lib/lxc/bullseye/config
lxc.net.0.type = veth
lxc.net.0.flags = up
lxc.net.0.link = virbr1
lxc.net.0.ipv4.address = 192.168.1.111/24
lxc.net.0.ipv4.gateway = 192.168.1.1
You have to attach to the container and run
{{Cmd|lxc-attach -n bullseye
systemctl stop systemd-networkd
systemctl disable systemd-networkd
reboot
}}
After the reboot the IP address should be set correctly. This can be confirmed using the lxc-ls command
{{Cmd|# lxc-ls -f
NAME      STATE  AUTOSTART GROUPS IPV4          IPV6 UNPRIVILEGED       
bullseye  RUNNING 1        -      192.168.1.111  -    false
}}
=== Ubuntu template ===
{{Obsolete|Alpine has not contained grsec for a long time}}
In order to create an ubuntu template container, you'll need to turn off some grsecurity chroot options:
{{Cmd|echo 0 > /proc/sys/kernel/grsecurity/chroot_caps
echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chroot
echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mount
echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mknod
echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chmod
}}
Remember to turn them back on, or simply reboot.
Now you can run (replace %MIRROR% with the actual hostname, for example: http://us.archive.ubuntu.com/ubuntu/)
{{Cmd|lxc-create -n guest2 -f /etc/lxc/default.conf -t ubuntu -- -r xenial -a amd64 -u user --password secretpassword --mirror $MIRROR  }}
{{Warning|Be sure to set systemd_container to yes in /etc/conf.d/lxc.CONTAINER.  Otherwise, most functionality will be broken}}
=== Unprivileged LXC images (Alpine / Debian / Ubuntu / Centos etc..) ===
To enable unprivileged containers, one must create a uidgid map:
echo root:1000000:65536 | tee -a /etc/subuid
echo root:1000000:65536 | tee -a /etc/subgid
This creates a uid and gid map for the root user starting at 1000000 with a size of 65536.
To configure containers to use this mapping, add the following lines to the configuration:
lxc.idmap = u 0 1000000 65536
lxc.idmap = g 0 1000000 65536
This can be in the global or container-specific configuration.
To create an unprivileged lxc container, you need to use the download template. The download template must be installed:
{{Cmd|apk add gnupg xz lxc-download
lxc-create -n container-name -t download}}
choose the Distribution | Release | Architecture.
To be able to log in to a Debian container, you currently need to:
{{Cmd|rm /lib/systemd/system/container-getty\@.service}}
You can also [https://without-systemd.org/wiki/index_php/How_to_remove_systemd_from_a_Debian_jessie/sid_installation/ remove Systemd from the container].


== Starting/Stopping the guest ==
== Starting/Stopping the guest ==
First, you should enable the cgroup script:
{{Cmd|rc-update add cgroups}}
If you don't want to reboot, you can start the service by running
{{Cmd|rc-service cgroups start}}
Create a symlink to the ''/etc/init.d/lxc'' script for your guest.
Create a symlink to the ''/etc/init.d/lxc'' script for your guest.
{{Cmd|ln -s lxc /etc/init.d/lxc.guest1}}
{{Cmd|ln -s lxc /etc/init.d/lxc.guest1}}


You can start your guest with:
You can start your guest with:
{{Cmd|/etc/init.d/lxc.guest1 start}}
{{Cmd|rc-service lxc.guest1 start}}


Stop it with:
Stop it with:
{{Cmd|/etc/init.d/lxc.guest1 stop}}
{{Cmd|rc-service lxc.guest1 stop}}


Make it autostart on boot up with:
Make it autostart at boot-up with:
{{Cmd| rc-update add lxc.guest1}}
{{Cmd| rc-update add lxc.guest1}}
You can add to the container config: <code>lxc.start.auto = 1</code>
{{Cmd|rc-update add lxc}}
to autostart containers with the lxc service only.


== Connecting to the guest ==
== Connecting to the guest ==
By default sshd is not installed, so you will have to connect to a virtual console. This is done with:
By default, sshd is not installed. You'll have to attach to the container or connect to the virtual console. This is done with:
 
{{Cmd|lxc-attach -n guest1}}
 
Type exit to detach from the container again (please check the grsec notes above)
 
== Connect to virtual console ==
 
{{Cmd|lxc-console -n guest1}}
{{Cmd|lxc-console -n guest1}}


To disconnect from it, press {{key|Ctrl}}+{{key|a}} {{key|q}}
To disconnect, press {{key|Ctrl}}+{{key|a}} {{key|q}}


== Deleting a guest ==
== Deleting a guest ==
Make sure the guest is stopped and run:
Make sure the guest is stopped, then run:
{{Cmd|lxc-destroy -n guest1}}
{{Cmd|lxc-destroy -n guest1}}
This will erase eerything, without asking any questions. It is equivalent to: {{Cmd|rm -r /var/lib/lxc/guest1}}
This will erase everything, without asking any questions. It is equivalent to: {{Cmd|rm -r /var/lib/lxc/guest1}}
 
== Advanced ==
 
=== Creating a LXC container without modifying your network interfaces ===
 
The problem with bridging is that the interface you bridge gets replaced with your new bridge interface.
Let's say you have interface eth0 that you want to bridge. Your eth0 interface gets replaced with the br0 interface that you create. It also means that the interface you use needs to be placed into promiscuous mode to catch all the traffic that could be destined to the other side of the bridge, which may not be what you want.
 
The solution is to create a dummy network interface, bridge that, and set up NAT so that traffic out of your bridge interface gets pushed through the interface of your choice.
 
Let's create that dummy interface (thanks to ncopa for talking me out of macvlan and pointing out the dummy interface kernel module)
 
{{Cmd|modprobe dummy}}
 
This will create a dummy interface called dummy0 on your host. To create this interface on every boot, append "dummy" to /etc/modules:
 
Now we will create a bridge called br0
 
{{Cmd |brctl addbr br0
brctl setfd br0 0 }}
 
and then make that dummy interface one end of the bridge
 
{{Cmd | brctl addif br0 dummy0 }}
 
Next, let's give that bridged interface a reason to exist:
 
{{ Cmd | ifconfig br0 192.168.1.1 netmask 255.255.255.0 up}}
 
Create a file for your container. Let's say /etc/lxc/bridgenat.conf, with the following settings.
 
<pre>
lxc.net.0.type = veth
lxc.net.0.flags = up
lxc.net.0.link = br0
lxc.net.0.name = eth1
lxc.net.0.ipv4.address = 192.168.1.2/24 192.168.1.255
lxc.net.0.ipv4.gateway = 192.168.1.1
lxc.net.0.veth.pair = veth-if-0
</pre>
 
and build your container with that file:
 
{{ Cmd | lxc-create -n alpine -f /etc/lxc/bridgenat.conf -t alpine }}
 
You should now be able to ping your container from your host, and your host from your container.
 
Your container needs to know where to push traffic that isn't within it's subnet. To do so, we tell the container to route through the bridge interface, br0
From inside the container run
 
{{ Cmd | route add default gw 192.168.1.1 }}
 
The next step is to push the traffic coming from your private subnet over br0 out through your internet facing interface, or any interface you chose
 
We are messing with your IP tables here, so make sure these settings don't conflict with anything you may have already set up.
 
Say eth0 was your internet facing network interface, and br0 is the name of the bridge you made earlier. We'd do this:
 
{{ Cmd | echo 1 > /proc/sys/net/ipv4/ip_forward
iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE
iptables --append FORWARD --in-interface br0 -j ACCEPT
}}
 
Now you should be able to route through your bridge interface to the internet facing interface of your host from your container, just like at home!
 
You could also have a dhcp server running on your host, and set it up to give IP addresses from your private subnet to any container that requests it, and then have one template for multiple alpine LXC containers, perfect for alpine development :)
 
=== Using static IP ===
 
If you're using static IP, you need to configure this properly on the guest /etc/network/interfaces. To stay in line with the above example, modify ''/var/lib/lxc/guest1/rootfs/etc/network/interfaces''
 
from
 
#auto lo
    iface lo inet loopback
auto eth0
    iface eth0 inet '''dhcp'''
 
to
 
#auto lo
    iface lo inet loopback
auto eth0
    iface eth0 inet '''static'''
    address <lxc-container-ip>  # IP which the lxc container should use
    gateway <gateway-ip>        # IP of gateway to use, mostly same as on lxc-host
    netmask <netmask>
 
=== mem and swap ===
 
{{Cmd|vim /boot/extlinux.conf}}
 
{{Cmd|
  APPEND initrd{{=}}initramfs-3.10.13-1-grsec root{{=}}UUID{{=}}7cd8789f-5659-40f8-9548-ae8f89c918ab modules{{=}}sd-mod,usb-storage,ext4 quiet cgroup_enable{{=}}memory swapaccount{{=}}1
}}
 
=== checkconfig ===
{{Cmd|lxc-checkconfig}}
 
{{Cmd|
Kernel configuration not found at /proc/config.gz; searching...
Kernel configuration found at /boot/config-3.10.13-1-grsec
--- Namespaces ---
Namespaces: enabled
Utsname namespace: enabled
Ipc namespace: enabled
Pid namespace: enabled
User namespace: missing
Network namespace: enabled
Multiple /dev/pts instances: enabled
 
--- Control groups ---
Cgroup: enabled
Cgroup clone_children flag: enabled
Cgroup device: enabled
Cgroup sched: enabled
Cgroup cpu account: enabled
Cgroup memory controller: missing
Cgroup cpuset: enabled
 
--- Misc ---
Veth pair device: enabled
Macvlan: enabled
Vlan: enabled
File capabilities: enabled
 
Note : Before booting a new kernel, you can check its configuration
usage : CONFIG{{=}}/path/to/config /usr/bin/lxc-checkconfig
 
}}
 
=== VirtualBox ===
 
In order for the network to work on containers, you need to set "Promiscuous Mode" to "Allow All" in VirtualBox settings for the network adapter.
 
[[File:VirtualBoxNetworkAdapter.jpg]]
 
[[Category:Virtualization]]
 
=== postgreSQL ===
 
Inside the container run: {{Cmd|chmod go+w /dev/null}} to fix {{Cmd|rc-service postgresql start}}
 
=== openVPN ===
 
see [[Setting_up_a_OpenVPN_server#openVPN_and_LXC]]
 
== LXC 1.0 Additional information ==
 
Some info regarding new features in LXC 1.0
https://www.stgraber.org/2013/12/20/lxc-1-0-blog-post-series/
 
== See also ==
* [[Howto-lxc-simple]]

Latest revision as of 10:42, 17 November 2023

Linux Containers (LXC) provides containers similar to BSD Jails, Linux VServers and Solaris Zones. It gives the impression of virtualization, but shares the kernel and resources with the "host". You can use lxc directly or through LXD.

Installation

Install the required packages:

apk add lxc bridge lxcfs lxc-download xz

If you want to create containers other than Alpine, you'll need lxc-templates:

apk add lxc-templates

Upgrading from 2.x

Starting with Alpine 3.9, we ship LXC version 3.1. LXC 3.x has major changes which can and will break your current setup. LXC 3.x will NOT ship with legacy container templates. Check your current container configs to see if you have any includes pointing to files that don't exist (shipped by legacy templates). For example if you use Alpine containers created with the Alpine template, you'll need to install:

apk add lxc-templates-legacy-alpine

Also make sure you convert your LXC config files to the new 2.x format (this is now required).

lxc-update-config -c /var/lib/lxc/container-name/config

Make sure you have removed cgroup_enable from your cmdline as this will fail to mount cgroups and fail LXC service.

Prepare network on host

Install the lxc-bridge package to create the lxcbr0 bridge and configure the forwarding routes using iptables

apk add lxc-bridge iptables

Enable the dnsmasq OpenRC service at boot and start it

rc-update add dnsmasq.lxcbr0 boot
service dnsmasq.lxcbr0 start

If you dont want to forward the routes, add DISABLE_IPTABLES="yes" to the /etc/conf.d/dnsmasq.lxcbr0 file

Assign static IP for a container

Using the dnsmasq method you can leave the container interface asking for DHCP as it is. You will just need to set the DHCP server asnwers.

By editing the file /etc/lxc/dnsmasq.conf and add the hostname (container name) and desired ip

 dhcp-host=guest1,10.0.3.4
 dhcp-host=guest2,10.0.3.5

Restart the service

 service dnsmasq.lxcbr0 restart

Create a guest

Picking from the list

lxc-create -n guest1 -f /etc/lxc/default.conf -t download

And just pick from the list. lxc-download and xz can be uninstalled after you are done.

Alpine Template

lxc-create -n guest1 -f /etc/lxc/default.conf -t alpine

This will create a /var/lib/lxc/guest1 directory with a config file and a rootfs directory.

Note: by default, the alpine template does not have networking service on, you will need to add it using lxc-console


If running on x64 compatible hardware, it is possible to create a 32bit guest:

lxc-create -n guest1 -f /etc/lxc/default.conf -t alpine -- --arch x86

Debian template

In order to create a debian template container you'll need to install some packages:

apk add debootstrap rsync

You'll need to turn off some grsecurity chroot options otherwise the debootstrap will fail:

echo 0 > /proc/sys/kernel/grsecurity/chroot_caps echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chroot echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mount echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mknod echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chmod


Remember to turn them back on, or simply reboot.

Now you can run:

SUITE=wheezy lxc-create -n guest1 -f /etc/lxc/default.conf -t debian

Setting a static IP

Since Debian Bullseye 11.3 you can't assign a static IP address using the lxc config file of the container because of a systemd change. To make it work with a configuration like the following

# grep net /var/lib/lxc/bullseye/config 
lxc.net.0.type = veth
lxc.net.0.flags = up
lxc.net.0.link = virbr1
lxc.net.0.ipv4.address = 192.168.1.111/24
lxc.net.0.ipv4.gateway = 192.168.1.1


You have to attach to the container and run

lxc-attach -n bullseye systemctl stop systemd-networkd systemctl disable systemd-networkd reboot


After the reboot the IP address should be set correctly. This can be confirmed using the lxc-ls command

# lxc-ls -f NAME STATE AUTOSTART GROUPS IPV4 IPV6 UNPRIVILEGED bullseye RUNNING 1 - 192.168.1.111 - false

Ubuntu template

This material is obsolete ...

Alpine has not contained grsec for a long time (Discuss)

In order to create an ubuntu template container, you'll need to turn off some grsecurity chroot options:

echo 0 > /proc/sys/kernel/grsecurity/chroot_caps echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chroot echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mount echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mknod echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chmod

Remember to turn them back on, or simply reboot.

Now you can run (replace %MIRROR% with the actual hostname, for example: http://us.archive.ubuntu.com/ubuntu/)

lxc-create -n guest2 -f /etc/lxc/default.conf -t ubuntu -- -r xenial -a amd64 -u user --password secretpassword --mirror $MIRROR

Warning: Be sure to set systemd_container to yes in /etc/conf.d/lxc.CONTAINER. Otherwise, most functionality will be broken


Unprivileged LXC images (Alpine / Debian / Ubuntu / Centos etc..)

To enable unprivileged containers, one must create a uidgid map:

echo root:1000000:65536 | tee -a /etc/subuid 
echo root:1000000:65536 | tee -a /etc/subgid

This creates a uid and gid map for the root user starting at 1000000 with a size of 65536.

To configure containers to use this mapping, add the following lines to the configuration:

lxc.idmap = u 0 1000000 65536
lxc.idmap = g 0 1000000 65536

This can be in the global or container-specific configuration.

To create an unprivileged lxc container, you need to use the download template. The download template must be installed:

apk add gnupg xz lxc-download lxc-create -n container-name -t download

choose the Distribution | Release | Architecture.

To be able to log in to a Debian container, you currently need to:

rm /lib/systemd/system/container-getty\@.service

You can also remove Systemd from the container.

Starting/Stopping the guest

First, you should enable the cgroup script:

rc-update add cgroups

If you don't want to reboot, you can start the service by running

rc-service cgroups start

Create a symlink to the /etc/init.d/lxc script for your guest.

ln -s lxc /etc/init.d/lxc.guest1

You can start your guest with:

rc-service lxc.guest1 start

Stop it with:

rc-service lxc.guest1 stop

Make it autostart at boot-up with:

rc-update add lxc.guest1

You can add to the container config: lxc.start.auto = 1

rc-update add lxc

to autostart containers with the lxc service only.

Connecting to the guest

By default, sshd is not installed. You'll have to attach to the container or connect to the virtual console. This is done with:

lxc-attach -n guest1

Type exit to detach from the container again (please check the grsec notes above)

Connect to virtual console

lxc-console -n guest1

To disconnect, press Ctrl+a q

Deleting a guest

Make sure the guest is stopped, then run:

lxc-destroy -n guest1

This will erase everything, without asking any questions. It is equivalent to:

rm -r /var/lib/lxc/guest1

Advanced

Creating a LXC container without modifying your network interfaces

The problem with bridging is that the interface you bridge gets replaced with your new bridge interface. Let's say you have interface eth0 that you want to bridge. Your eth0 interface gets replaced with the br0 interface that you create. It also means that the interface you use needs to be placed into promiscuous mode to catch all the traffic that could be destined to the other side of the bridge, which may not be what you want.

The solution is to create a dummy network interface, bridge that, and set up NAT so that traffic out of your bridge interface gets pushed through the interface of your choice.

Let's create that dummy interface (thanks to ncopa for talking me out of macvlan and pointing out the dummy interface kernel module)

modprobe dummy

This will create a dummy interface called dummy0 on your host. To create this interface on every boot, append "dummy" to /etc/modules:

Now we will create a bridge called br0

brctl addbr br0 brctl setfd br0 0

and then make that dummy interface one end of the bridge

brctl addif br0 dummy0

Next, let's give that bridged interface a reason to exist:

ifconfig br0 192.168.1.1 netmask 255.255.255.0 up

Create a file for your container. Let's say /etc/lxc/bridgenat.conf, with the following settings.

lxc.net.0.type = veth
lxc.net.0.flags = up
lxc.net.0.link = br0
lxc.net.0.name = eth1
lxc.net.0.ipv4.address = 192.168.1.2/24 192.168.1.255
lxc.net.0.ipv4.gateway = 192.168.1.1
lxc.net.0.veth.pair = veth-if-0

and build your container with that file:

lxc-create -n alpine -f /etc/lxc/bridgenat.conf -t alpine

You should now be able to ping your container from your host, and your host from your container.

Your container needs to know where to push traffic that isn't within it's subnet. To do so, we tell the container to route through the bridge interface, br0 From inside the container run

route add default gw 192.168.1.1

The next step is to push the traffic coming from your private subnet over br0 out through your internet facing interface, or any interface you chose

We are messing with your IP tables here, so make sure these settings don't conflict with anything you may have already set up.

Say eth0 was your internet facing network interface, and br0 is the name of the bridge you made earlier. We'd do this:

echo 1 > /proc/sys/net/ipv4/ip_forward iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface br0 -j ACCEPT

Now you should be able to route through your bridge interface to the internet facing interface of your host from your container, just like at home!

You could also have a dhcp server running on your host, and set it up to give IP addresses from your private subnet to any container that requests it, and then have one template for multiple alpine LXC containers, perfect for alpine development :)

Using static IP

If you're using static IP, you need to configure this properly on the guest /etc/network/interfaces. To stay in line with the above example, modify /var/lib/lxc/guest1/rootfs/etc/network/interfaces

from

#auto lo
    iface lo inet loopback
auto eth0
    iface eth0 inet dhcp

to

#auto lo
    iface lo inet loopback
auto eth0
    iface eth0 inet static
    address <lxc-container-ip>   # IP which the lxc container should use
    gateway <gateway-ip>         # IP of gateway to use, mostly same as on lxc-host
    netmask <netmask>

mem and swap

vim /boot/extlinux.conf

APPEND initrd=initramfs-3.10.13-1-grsec root=UUID=7cd8789f-5659-40f8-9548-ae8f89c918ab modules=sd-mod,usb-storage,ext4 quiet cgroup_enable=memory swapaccount=1

checkconfig

lxc-checkconfig

Kernel configuration not found at /proc/config.gz; searching... Kernel configuration found at /boot/config-3.10.13-1-grsec --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: missing Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup clone_children flag: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: missing Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: enabled Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/bin/lxc-checkconfig

VirtualBox

In order for the network to work on containers, you need to set "Promiscuous Mode" to "Allow All" in VirtualBox settings for the network adapter.

postgreSQL

Inside the container run:

chmod go+w /dev/null

to fix

rc-service postgresql start

openVPN

see Setting_up_a_OpenVPN_server#openVPN_and_LXC

LXC 1.0 Additional information

Some info regarding new features in LXC 1.0

https://www.stgraber.org/2013/12/20/lxc-1-0-blog-post-series/

See also