Include:Abuild

Package build helpers

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

-a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
-i Install public key into /etc/apk/keys using sudo
-h Show this help
-n Non-interactive. Use defaults
-q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

-h Show this help
-k The private key to use for signing
-p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

--hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
--cut Remove the end of file tar record

abuild

To build a package, abuild is used. Beside the package building functionality also options for other package maintainance tasks are provided.

If you just want to build a package from a APKBUILD file, only those two command are needed.

abuild checksum && abuild -r

Below all options and commands for abuild are listed.

abuild [-c] -n PKGNAME[-PKGVER]

abuild options

-c Enable colored output
-d Disable dependency checking
-f Force specified cmd, even if they are already done
-F Force run as root
-h Show this help
-i Install PKG after successul build
-k Keep built packages, even if APKBUILD or sources are newer
-m Disable colors (monochrome)
-p Set package destination directory
-P Set PKGDEST to REPODEST/<repo>/\$CARCH, where repo is the parents dir name
-q Quiet
-r Install missing dependencies from system repository (using sudo)
-R Recursively build and install missing dependencies (using sudo)
-s Set source package destination directory
-u Recursively build and upgrade all dependencies (using sudo)

abuild commands

checksum Generate checksum to be included in APKBUILD
fetch Fetch sources to \$SRCDEST and verify checksums
sanitycheck Basic sanity check of APKBUILD
md5check Check md5sums
unpack Unpack sources to \$srcdir
build Compile and install package into \$pkgdir
listpkg List target packages
package Create package in \$PKGDEST
rootpkg Run '$0 build package' as fakeroot
clean Remove temp build and install dirs
cleanoldpkg Remove binary packages except current version
cleanpkg Remove already built binary and source package
cleancache Remove downloaded files from \$SRCDEST
srcpkg Make a source package
sourcecheck Check if remote source package exists upstream
up2date Compare target and sources dates
installdeps Install packages listed in makedepends and depends
uninstalldeps Uninstall packages listed in makedepends and depends

abump

The abuild package provides scripts necessary for creating packages for Alpine Linux. It implements functionality for building packages as well as additional commands and options for package maintenance.

For package development and maintenance, it is recommended to install the alpine-sdk, which will install abuild in addition to other relevant tools.

apk add alpine-sdk

The git repository always contains the latest version of the scripts, example-files, and makefiles.

Building packages

Prerequisites

In order to use abuild:

The user executing abuild must be a member of the abuild group.
The environment must be set up for abuild.

Basic usage

If you just want to build a package from an APKBUILD file, only two command are needed. Both commands operate on an APKBUILD file in the current directory, so you should cd into the directory before running them.

abuild checksum: updates the checksums for source files.
abuild -r: builds the package.

The manual page (available via man abuild) describes all options and commands for abuild.

Building in a chroot

Install package abuild-rootbld:

apk add abuild-rootbld

You may now build your packages from source in an unprivileged sandbox based on bubblewrap with the command:

abuild rootbld

rootbld assumes your APKBUILD file is in the ~/aports whose structure like aports or you need to set environment variable APORTSDIR to current directory. If the build process needs network access there has to bet set the net option in APKBUILD.

Note that using rootbld inside a docker container requires additional configuration.

Bumping a package version

The tool abump is a utility to bump pkgver in APKBUILD files if the package gets an update to a newer upstream release. abump will update the package's pkgver, rebuild it and create a new commit with the resulting changes.

The manual page (available via man abump) describes all options for abump.

Updating a package release

If you want to bump or reset the pkgrel value of your APKBUILD or test your APKBUILD files, apkgrel can assist you.

apkgrel -a|-h|-s NUM|-t|-z [-f] FILE...

apkgrel options

-a Add 1 to current pkgrel
-f Force, even if given files are not in proper format
-h Show this help
-s Set pkgrel to NUM
-t Only verify that files are in proper format
-z Set pkgrel to 0

Generating new APKBUILDs

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file in the given directory, and fill some variables if those are provided.

The manual page (available via man newapkbuild) describes all options for newapkbuild.

apkbuild-cpan

The Comprehensive Perl Archive Network (CPAN) provides a large collection of perl software and documentation. apkbuild-cpan helps with the creation of APKBUILD for perl modules from CPAN.

apkbuild-cpan [create <Module::Name> | check | recreate | update | upgrade]

This command is provided by the apkbuild-cpan package.

apkbuild-pypi

The Python Package Index (PyPi) is a repository of software and libraries for the Python programming language. apkbuild-pypi helps with the creation of APKBUILD for python package hosted at PyPI.

apkbuild-pypi [create <package> | check | recreate | update | upgrade

This command is provided by the apkbuild-pypi package.

Signing packages and indexes

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

-h Show this help
-k The private key to use for signing
-p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

--hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
--cut Remove the end of file tar record

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

-a Set the aports base dir to APORTSDIR instead of $HOME/aports
-d Set destination repository base dir to REPODIR instead of $HOME/packages
-h Show this help and exit
-l Send build to logfile, prefixed by LOGPREFIX
-p Purge obsolete packages from REPODIR after build
-r Dependencies are found in DEPREPO

Setting up the build environment

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

-a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
-i Install public key into /etc/apk/keys using sudo
-h Show this help
-n Non-interactive. Use defaults
-q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

apkgrel

Apkgrel

APKBUILD generation

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file to the given directory, and fill some variables if those are provided.

The abuild package provides scripts necessary for creating packages for Alpine Linux. It implements functionality for building packages as well as additional commands and options for package maintenance.

For package development and maintenance, it is recommended to install the alpine-sdk, which will install abuild in addition to other relevant tools.

apk add alpine-sdk

The git repository always contains the latest version of the scripts, example-files, and makefiles.

Building packages

Prerequisites

In order to use abuild:

The user executing abuild must be a member of the abuild group.
The environment must be set up for abuild.

Basic usage

If you just want to build a package from an APKBUILD file, only two command are needed. Both commands operate on an APKBUILD file in the current directory, so you should cd into the directory before running them.

abuild checksum: updates the checksums for source files.
abuild -r: builds the package.

The manual page (available via man abuild) describes all options and commands for abuild.

Building in a chroot

Install package abuild-rootbld:

apk add abuild-rootbld

You may now build your packages from source in an unprivileged sandbox based on bubblewrap with the command:

abuild rootbld

rootbld assumes your APKBUILD file is in the ~/aports whose structure like aports or you need to set environment variable APORTSDIR to current directory. If the build process needs network access there has to bet set the net option in APKBUILD.

Note that using rootbld inside a docker container requires additional configuration.

Bumping a package version

The tool abump is a utility to bump pkgver in APKBUILD files if the package gets an update to a newer upstream release. abump will update the package's pkgver, rebuild it and create a new commit with the resulting changes.

The manual page (available via man abump) describes all options for abump.

Updating a package release

If you want to bump or reset the pkgrel value of your APKBUILD or test your APKBUILD files, apkgrel can assist you.

apkgrel -a|-h|-s NUM|-t|-z [-f] FILE...

apkgrel options

-a Add 1 to current pkgrel
-f Force, even if given files are not in proper format
-h Show this help
-s Set pkgrel to NUM
-t Only verify that files are in proper format
-z Set pkgrel to 0

Generating new APKBUILDs

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file in the given directory, and fill some variables if those are provided.

The manual page (available via man newapkbuild) describes all options for newapkbuild.

apkbuild-cpan

The Comprehensive Perl Archive Network (CPAN) provides a large collection of perl software and documentation. apkbuild-cpan helps with the creation of APKBUILD for perl modules from CPAN.

apkbuild-cpan [create <Module::Name> | check | recreate | update | upgrade]

This command is provided by the apkbuild-cpan package.

apkbuild-pypi

The Python Package Index (PyPi) is a repository of software and libraries for the Python programming language. apkbuild-pypi helps with the creation of APKBUILD for python package hosted at PyPI.

apkbuild-pypi [create <package> | check | recreate | update | upgrade

This command is provided by the apkbuild-pypi package.

Signing packages and indexes

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

-h Show this help
-k The private key to use for signing
-p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

--hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
--cut Remove the end of file tar record

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

-a Set the aports base dir to APORTSDIR instead of $HOME/aports
-d Set destination repository base dir to REPODIR instead of $HOME/packages
-h Show this help and exit
-l Send build to logfile, prefixed by LOGPREFIX
-p Purge obsolete packages from REPODIR after build
-r Dependencies are found in DEPREPO

Setting up the build environment

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

-a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
-i Install public key into /etc/apk/keys using sudo
-h Show this help
-n Non-interactive. Use defaults
-q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

apkbuild-cpan

Apkbuild-cpan

apkbuild-pypi

The abuild package provides scripts necessary for creating packages for Alpine Linux. It implements functionality for building packages as well as additional commands and options for package maintenance.

For package development and maintenance, it is recommended to install the alpine-sdk, which will install abuild in addition to other relevant tools.

apk add alpine-sdk

The git repository always contains the latest version of the scripts, example-files, and makefiles.

Building packages

Prerequisites

In order to use abuild:

The user executing abuild must be a member of the abuild group.
The environment must be set up for abuild.

Basic usage

If you just want to build a package from an APKBUILD file, only two command are needed. Both commands operate on an APKBUILD file in the current directory, so you should cd into the directory before running them.

abuild checksum: updates the checksums for source files.
abuild -r: builds the package.

The manual page (available via man abuild) describes all options and commands for abuild.

Building in a chroot

Install package abuild-rootbld:

apk add abuild-rootbld

You may now build your packages from source in an unprivileged sandbox based on bubblewrap with the command:

abuild rootbld

rootbld assumes your APKBUILD file is in the ~/aports whose structure like aports or you need to set environment variable APORTSDIR to current directory. If the build process needs network access there has to bet set the net option in APKBUILD.

Note that using rootbld inside a docker container requires additional configuration.

Bumping a package version

The tool abump is a utility to bump pkgver in APKBUILD files if the package gets an update to a newer upstream release. abump will update the package's pkgver, rebuild it and create a new commit with the resulting changes.

The manual page (available via man abump) describes all options for abump.

Updating a package release

If you want to bump or reset the pkgrel value of your APKBUILD or test your APKBUILD files, apkgrel can assist you.

apkgrel -a|-h|-s NUM|-t|-z [-f] FILE...

apkgrel options

-a Add 1 to current pkgrel
-f Force, even if given files are not in proper format
-h Show this help
-s Set pkgrel to NUM
-t Only verify that files are in proper format
-z Set pkgrel to 0

Generating new APKBUILDs

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file in the given directory, and fill some variables if those are provided.

The manual page (available via man newapkbuild) describes all options for newapkbuild.

apkbuild-cpan

The Comprehensive Perl Archive Network (CPAN) provides a large collection of perl software and documentation. apkbuild-cpan helps with the creation of APKBUILD for perl modules from CPAN.

apkbuild-cpan [create <Module::Name> | check | recreate | update | upgrade]

This command is provided by the apkbuild-cpan package.

apkbuild-pypi

The Python Package Index (PyPi) is a repository of software and libraries for the Python programming language. apkbuild-pypi helps with the creation of APKBUILD for python package hosted at PyPI.

apkbuild-pypi [create <package> | check | recreate | update | upgrade

This command is provided by the apkbuild-pypi package.

Signing packages and indexes

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

-h Show this help
-k The private key to use for signing
-p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

--hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
--cut Remove the end of file tar record

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

-a Set the aports base dir to APORTSDIR instead of $HOME/aports
-d Set destination repository base dir to REPODIR instead of $HOME/packages
-h Show this help and exit
-l Send build to logfile, prefixed by LOGPREFIX
-p Purge obsolete packages from REPODIR after build
-r Dependencies are found in DEPREPO

Setting up the build environment

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

-a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
-i Install public key into /etc/apk/keys using sudo
-h Show this help
-n Non-interactive. Use defaults
-q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

Misc tools

buildlab

More details can be found at the buildlab page.

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

-a Set the aports base dir to APORTSDIR instead of $HOME/aports
-d Set destination repository base dir to REPODIR instead of $HOME/packages
-h Show this help and exit
-l Send build to logfile, prefixed by LOGPREFIX
-p Purge obsolete packages from REPODIR after build
-r Dependencies are found in DEPREPO

cmp-apks-iso

devbuild

initramfs-init