Template:Upgrading Alpine environmentvars

Setup environment variables

To make the documentation a bit more 'generic' we start by setting some environment variables.

vi /etc/lbu/lbu.conf

Make sure that the variable 'LBU_MEDIA' is not commented (by removing the leading '#').
You also need to set a appropriate value for your 'LBU_MEDIA'. The media you choose will be the media where you store your settings/configuration.
Note: Even if you have you alpine installed on CF, HD or USB you can still choose to save your config on some other media that suits your needs. But remember that both the media where you have your alpine AND the media where you have your config, needs to be in your box when booting it.

Example:

LBU_MEDIA=sda1

Now that you have your '/etc/lbu/lbu.conf' configured for your needs, we will set the environment variables (note the leading '.').

. /etc/lbu/lbu.conf

You can test if your environment variable was set

echo $LBU_MEDIA

It should output something like 'hda1', 'usb' or whatever you just configured

Back up your config

Before starting to upgrade, it's wise to save your configuration.

lbu ci