Setting up disks manually
Alpine Linux modes
Alpine Linux can be installed and run in following three modes.
Diskless Mode
In Diskless mode the entire operating system with all applications are first loaded into RAM and then only run from there. This is the method already used to boot the .iso installation images, however setup-alpine can also configure the installed system to continue to boot like this if "disk=none" is specified. The mode is extremely fast and can save on unnecessary disk spin-ups, power, and wear. It is similar to what other linux distributions may call a "frugal" install or boot into with a "toram" option.
Custom configurations and package installations may optionally still be preserved or "persist" across reboots by using the Alpine local backup tool lbu. It enables committing and reverting system states by using .apkovl files that are saved to writable storage and loaded when booting. If additional or updated packages have been added to the system, these may also be made available for automatic (re)installation during the boot phase without any (re)downloading, by enabling a local package cache on the writable storage.
[FIXME-1: Storing local configs and the package cache on internal disks still require some manual steps to have the partition listed, i.e. making a /etc/fstab entry, mountpoint, and mount, *before* running setup-alpine. The linked workaround also still requires to commit these configurations to disk manually before rebooting.]
If a writable partition is available, setup-alpine can be told to store the configs and the package cache on that writable partition. (Later, another directory on that same partition or another available partition may also be mounted as /home, or for example, for selected important applications to keep their run-time and user data on it.)
The boot device of the newly configured local "diskless" system may remain the initial (and possibly read-only) installation media. But it is also possible to copy the boot system to a partition (e.g. /dev/sdXY) with setup-bootable.
Data Disk Mode
In Data Disk mode also the operating system runs from system RAM, thus it enjoys the same accelerated operation speed as "diskless" mode. However, swap storage and the entire /var directory tree get mounted from a persistent storage device (two newly created partitions). The directory /var holds e.g. all log files, mailspools, databases, etc., as well as lbu backup commits and the package cache. This mode is useful for having RAM accelerated servers with variable amounts of user-data that exceed the available RAM size. It enables the entire current system state (not just the boot state) to survive a system crash in accordance with the particular filesystem guarantees.
[FIXME-2]: Setup-alpine will create the data partition and mount it as /var, but setup-alpine's "data" disk mode can not yet configure lbu config storage settings automatically. The current workaround, is to select "none" at the 'where to store configs' prompt (as the new data partition is not listed anyway) and configure lbu manually after setup-alpine exits, and before rebooting:
- Identify the created data partition, e.g.
/dev/sdXY, and its filesystemtype, e.g. usinglsblk - Manually edit the lbu backups location in
/etc/lbu/lbu.confand configureLBU_MEDIA=sdXY(according to the previous findings). - Save the configuration on that partition for the next boot with
lbu commit. - If (a new) partition fails to get mounted, execute:
mkdir /media/sdXY ; echo "/dev/sdXY /media/sdXY fstype noauto,rw 0 0" >> /etc/fstab, and trylbu commitagain.
In data disk mode, the boot device may also remain the initial (and possibly read-only) installation media, or be copied to a partition (e.g. /dev/sdXY) with setup-bootable.
System Disk Mode
System Disk Mode is the traditional hard-disk install. If this mode is selected, the setup-alpine script deletes the existing partitions and creates three partitions on the selected storage device, /boot, swap and / (the filesystem root). This mode may, for example, be used for generic desktop and development machines.
The menu choices that are provided by setup-alpine might not cover all needs. , however, it's possible to .
- If partitioning is not required, use environment variables to customize filesystems, bootloaders, boot and swap partition size, mount point etc., then Call setup-disk script.
- If custom partioning is needed, then Manually partition the disk and use System Disk Mode Installation to install Alpine Linux.
(Beta reference: docs.alpinelinux.org )
Using setup-disk features
Diskless Mode Installation
Following the Installation steps to complete the base configuration completes the pre-setup of "diskless" Alpine Linux system.
Use the setup-lbu script to configure a "local backup" location for the diskless system, and lbu commit to then save the local configuration state.
Refer Creating a bootable device for creating a bootable medium to boot the Diskless Mode Installation of your Alpine Linux.
 Some information on this section may be incomplete or outdate. |
This requires some manual steps, as long as the setup-scripts auto-detect usable partitions only on removable devices (not internal harddisks). They do not support creating new, writable partitions to be used by Alpine.
How to prepare writable storage space is explained in the section manual partitioning, below.
- Be aware of this Bug: #11589. The APKOVL loading of diskless setups doesn't work on btrfs and xfs filesystems, or nvme-based devices => So, for the moment, use only ext4 filesystem partitions on classic drives to store diskless mode states.
The following creates an ext4 partition with disabled journaling, to reduce write operations and allow the disk to spin down after the .apkovl and the packages have been read from the partition during the boot.
# mkfs.ext4 -O ^has_journal /dev/sdXY # the "-O ^has_journal" DISABLES journaling ("^" means "not")
Data Disk Mode Installation
Most information in Diskless Mode Installation also applies to Data Disk Mode Installation. Refer Creating a bootable device for creating a bootable medium to boot the Data Disk Mode Installation.
System Disk Mode Installation
System Disk Mode Installation in Alpine Linux is the equivalent of traditional harddisk installation.
Default Layout
When setup-alpine script calls setup-disk during System Disk mode Install, Alpine Linux is installed on harddisk in this mode i.e DISKDEV mode. setup-disk will set up a root partition, a separate /boot partition and a swap partition on the given DISKDEV without asking questions to the user. Hence, the setup-alpine script based installation supports only this default layout.
setup-disk /dev/sdX
When setup-disk is called with DISKDEV, where multiple disks are specified, then setup-disk sets them up in a RAID array. If there are more than 2 disks, then raid level 5 is used instead of RAID level 1. Refer RAID for more options.
Custom Layout
setup-disk must be called with a MOUNTPOINT for any layout different from the default layout. Then setup-disk will perform a traditional harddisk or System Disk mode install with MOUNTPOINT as root and any custom layout can be used.
To install Alpine Linux using a custom layout, manually create partitions, format them and mount them on /mnt (or any other mount point) as follows:
# mount /dev/sdXY /mnt
If you're using EFI, make sure you create a mount point /mnt/boot/efi.
# mkdir -p /mnt/boot/efi
Find the correct partition name for esp partition and mount it on the above mount point :
# mount /dev/esp /mnt/boot/efi
Then install Alpine Linux using the following command:
# setup-disk -m sys /mnt
setup-disk will install Alpine Linux system on the mounted root, uses your filesystem on the presented layout and generates fstab automatically and also installs an appropriate bootloader. In most cases, you can just reboot to boot into newly installed Alpine Linux. You can also choose to customize further.
Disk layouts
This entire section including RAID, Encryption and LVM needs to be updated. |
It is possible to have one or more of RAID, encrypted, and/or Logical Volume on your / (root) volume. However, the Alpine init script only knows how to handle them when they're layered in that order, and your initram and extlinux.conf files in the /boot partition are configured properly.
Your /boot directory cannot reside on an encrypted or LVM volume, at least not with Alpine's default bootloader (extlinux). (Grub2 can deal with /boot being on an LVM volume.) The usual practice is to create a small partition for /boot, then devote the rest of your disk to a separate partition on which you layer one or more of RAID, encryption, and/or Logical Volumes.
Sometimes /boot is also set up as a mirrored (RAID1) volume. However, this is just for post-init access. That way, when you write a new kernel or bootloader config file to /boot, it gets written to multiple physical partitions. During the pre-init, bootloader phase, only one of those partitions will be read from.
A typical setup might look like this:
One-disk system --------------- +------------------------------------------------+ | small partition (32--100M), holding | | only /boot, filesystem needn't be journaled | +------------------------------------------------+ | rest of disk in second partition | | +------------------------------------------+ | | | cryptsetup volume | | | | +-------------------------------------+ | | | | | LVM PV, containing single VG, | | | | | | containing multiple LVs, holding | | | | | | /, /home, swap, etc | | | | | +-------------------------------------+ | | | +------------------------------------------+ | +------------------------------------------------+ Two-disk system --------------- +------------------------------------------------+ +------------------------------------------------+ | small partition (32--100M), holding | | small partition (32--100M), holding | These 2 partitions might | only /boot, filesystem needn't be journaled | | only /boot, filesystem needn't be journaled | form a mirrored (RAID1) +------------------------------------------------+ +------------------------------------------------+ volume | rest of disk in second partition | | rest of disk in second partition | | T================================================================================================T | These 2 partitions form | T +--------------------------------------------------------------------------------------------+ T | a second mirrored | T | cryptsetup volume | T | (RAID1) volume | T | +---------------------------------------------------------------------------------------+ | T | | T | | LVM PV, containing single VG, | | T | | T | | containing multiple LVs, holding | | T | | T | | /, /home, swap, etc | | T | | T | +---------------------------------------------------------------------------------------+ | T | | T +--------------------------------------------------------------------------------------------+ T | | T================================================================================================T | | | | | +------------------------------------------------+ +------------------------------------------------+
In a three-disk system, the /boot would still be RAID1, but the larger partition might, in that case, be RAID5.
RAID
setup-disk will automatically build a RAID array if you supply the -r switch, or if you specify more than one device.
If you want to build your RAID array manually, see Setting up a software RAID array. Then you can add additional layers of encryption and/or Logical Volumes, or just assemble the RAID array, and supply the /dev/mdi device directly to setup-disk. When you're finished, be sure to disassemble the RAID array before rebooting.
If setup-disk sees that you're using RAID, either because you gave it the -r switch, or multiple devices, or a /dev/mdi device, then it will set up your initramfs and extlinux.conf file properly. However, in other cases, such as when you're also using encryption, or you invoke setup-disk with a mounted directory argument, these might not be properly set up for RAID. In that case, you may need to manually edit/rebuild them. The following assumes that $MNT holds the root directory you're installing into:
echo "/sbin/mdadm" > $MNT/etc/mkinitfs/files.d/raid echo "/etc/mdadm.conf" >> $MNT/etc/mkinitfs/files.d/raid # edit $MNT/etc/mkinitfs/mkinitfs.conf to make sure features="..." # includes raid (this field is space-separated and quoted) mkinitfs -c $MNT/etc/mkinitfs/mkinitfs.conf -b $MNT # edit $MNT/etc/update-extlinux.conf to make sure modules=... contains # raid1 or raid456 (whichever your / is on; this field is comma-separated) # also check the root= setting extlinux --raid --install $MNT/boot --update
--update option to extlinux ... suffice to make /boot/extlinux.conf be regenerated? Or do we need to manually tweak that file, or run update-extlinux, as well?
You might also need to manually tweak $MNT/etc/fstab. And you might need to copy /usr/share/syslinux/mbr.bin to your disk's MBR.
Encryption
See Setting up encrypted volumes with LUKS. You can add an additional Logical Volume layer, or just unlock the volume you've created (using cryptsetup luksOpen ...), and supply the /dev/mapper/something device directly to setup-disk. When you're finished, be sure to relock the volume (using cryptsetup luksClose ...) before rebooting.
If you install your / (root) on an encrypted volume, you'll need to manually edit/rebuild your initram and your extlinux.conf file. The following assumes that $MNT holds the root directory you're installing into, that you've created the cryptvolume on the device /dev/md2, and that you want to unlock the encrypted volume into a virtual volume named "crypt":
# edit $MNT/etc/mkinitfs/mkinitfs.conf to make sure features="..." # includes cryptsetup (this field is space-separated and quoted) mkinitfs -c $MNT/etc/mkinitfs/mkinitfs.conf -b $MNT # edit $MNT/etc/update-extlinux.conf to make sure default_kernel_opts="..." # contains cryptroot=/dev/md1 and cryptdm=crypt (this field is also space-separated and quoted) # also check the root= setting extlinux --install $MNT/boot --update
--update option to extlinux ... suffice to make /boot/extlinux.conf be regenerated? Or do we need to manually tweak that file, or run update-extlinux, as well?
You might also need to manually tweak $MNT/etc/fstab.
LVM
setup-disk will automatically build and use volumes in a LVM group if you supply the -L switch.
If you instead want to build your LVM system manually, see Setting up Logical Volumes with LVM. Then vgchange -ay, format and mount your volumes, and supply the root mountpoint to setup-disk. When you're finished, be sure to
umount ... vgchange -an
before rebooting.
If setup-disk sees that you're using LVM, perhaps because you gave it the -L switch, then it will set up your initram and extlinux.conf file properly. However, in other cases, these might not be properly set up. In that case, you may need to manually edit/rebuild them. The following assumes that $MNT holds the root directory you're installing into:
# edit $MNT/etc/mkinitfs/mkinitfs.conf to make sure features="..." # includes lvm (this field is space-separated and quoted) mkinitfs -c $MNT/etc/mkinitfs/mkinitfs.conf -b $MNT # edit $MNT/etc/update-extlinux.conf to make sure root= is set correctly extlinux --install $MNT/boot --update
--update option to extlinux ... suffice to make /boot/extlinux.conf be regenerated? Or do we need to manually tweak that file, or run update-extlinux, as well?
You might also need to manually tweak $MNT/etc/fstab.
Manual partitioning
Partitioning tools
The installation image enviroment may have only the very basic busybox built-in fdisk command available. Busybox `fdisk` is rather limited for edit operations. Instead, alpine allows you to install more complete partitioning tool packages like sfdisk (scriptable fdisk), gptfdisk, parted (CLI), cfdisk (text menus), or even gparted (after setting up a graphical environment).
These tools can be installed even during Installation immediately after setting up base configuration.
cfdisk will be used in all examples here as it is based on text menu without any dependencies:
The following step installs cfdisk:
# apk add cfdisk
Creating partitions
cfdisk will be used to create partitions. Before using cfdisk, the disk name must be identified by using blkid:
# blkid
/dev/sdX1: LABEL="some" UUID="..." TYPE="vfat" /dev/sdX2: LABEL="other" UUID="..." TYPE="ext4"
When cfdisk is run as follows, it looks for existing partitions on the disk /dev/sdX :
# cfdisk /dev/sdX
Resizing an existing partition
cfdisk and resize2fs can be used to resize existing partitions of ext2/3/4 filsystem on the disk. For other filsystems, the necessary filesystem tools must be installed. This can be done while booted.
To resize disk, launch the cfdisk:
# cfdisk /dev/sda
- Select the target partition, here as per image /dev/sda3
- Select Resize from the bottom menu.
- Enter the new Size at the prompt.
- Select Write, then Quit
If a filesystem is resized with -f (online mode), then the system must be rebooted immediately after the change is made.
# resize2fs -f /dev/sda3 # reboot
Formatting partitions
Refer Filesystems page to install the necessary filesystem tools and to format paritions.
Setting up swap
- create a partition with the type set to "linux swap" (82) (If you're going to use a logical volume for swap, skip this step and
lvcreatethat instead.) mkswap /dev/sda2echo -e "/dev/sda2 none swap sw 0 0" >> /mnt/etc/fstabswapon /dev/sda2(orrc-service swap start)
free -m
will show how much swap space is available (in MB).
If you prefer maximum speed, you don't need configure any raid devices for swap. Just add 2 swap partitions on different disks and linux will stripe them automatically. The downside is that the moment one disk fails, the system will go down. For better reliability, put swap on RAID1.
Custom boot partition size
The default boot partition size is under 40MB. This can cause errors if package updates require additional space on /boot.
Executing export BOOT_SIZE=512 before running setup-disk will result in a 512MB boot partition.