Bubblewrap

From Alpine Linux
Revision as of 07:50, 14 November 2023 by Encode (talk | contribs) (Finish fleshing out the explanation of the process.)
This material is work-in-progress ...

The reasoning is most likely wrong for why to do some stuff. Someone more experienced needs to look it over.
(Last edited by Encode on 14 Nov 2023.)

Bubblewrap is an unprivileged sandboxing tool. Kernel features it also has: User/IPC/PID/Network/UTS/cgroup namespaces and Seccomp filters.

How bubblewrap works, as stated in the README.md:

bubblewrap works by creating a new, completely empty, mount namespace where the root is on a tmpfs that is invisible from the host, and will be automatically cleaned up when the last process exits. You can then use commandline options to construct the root filesystem and process environment and command to run in the namespace.

Installation

Install bubblewrap:

# apk add bubblewrap

Note: The package is bubblewrap but the command to manage it is bwrap.

How to workout what a program needs

Tip: Look at Bubblewrap/Examples to see various ways bwrap can be used.

Prerequisites

First make sure to have a user editable directory in "$PATH". This page will use "${HOME}/.local/bin/", create it if it does not exist:

$ mkdir -p ~/.local/bin

Add it to ~/.profile:

Contents of ~/.profile

... PATH="${PATH}":"${HOME}/.local/bin" export PATH ...

Will need to relog for this to apply.

Basic bwrap setup

Note: With how we will be sandboxing everything that doesn't match our owner/group will show as nobody.

Lets assume you want to sandbox imv and are using Wayland only. Here is how you might go about that.

Create bwrap-imv inside "${HOME}/.local/bin/" and make it executable:

$ touch ~/.local/bin/bwrap-imv $ chmod 0700 ~/.local/bin/bwrap-imv

Use file to determine the file type of /usr/bin/imv:

$ file /usr/bin/imv /usr/bin/imv: POSIX shell script, ASCII text executable

Since it is just a shell script, we can use less to view it:

$ less /usr/bin/imv

Contents of /usr/bin/imv

#!/bin/sh if [ -n "${WAYLAND_DISPLAY}" ]; then exec /usr/libexec/imv-wayland "$@" else exec /usr/libexec/imv-x11 "$@" fi

Since we are assuming Wayland only we can just skip to /usr/libexec/imv-wayland. Run file on it:

$ file /usr/libexec/imv-wayland /usr/libexec/imv-wayland: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-musl-x86_64.so.1, stripped

It is an Executable and Linkable Format (ELF) file. So we know we need the ELF interpreter /lib/ld-musl-x86_64.so.1. We also know we need /usr/libexec/imv-wayland, since it has to know where the command is located.

As the argument to /usr/libexec/imv-wayland, put "${1:-./}", this will pass only the first argument and if there is none, will default to ./, the current directory. We will also need --ro-bind "${1:-./}" "$(realpath "${1:-./}")" \, since we are not passing the whole filesystem. This will get the absolute pathname using realpath, so you can pass a relative argument and still bind the argument: 

--ro-bind "${1:-./}" "$(realpath "${1:-./}")" \
/usr/libexec/imv-wayland "${1:-./}"
Warning: If you don't pass anything and it defaults to the current directory, it will have everything under that directory shown to imv, recursively.


Todo: How can you pass 2+ arguments?


Find necessary shared libraries, except ones loaded at runtime:

$ ldd /usr/libexec/imv-wayland

It outputs a lot of things but we only need a few; the directory path of the majority /usr/lib/* and the 4 paths that start with /lib/*. Filter the output to see those clearer:

$ ldd /usr/libexec/imv-wayland | grep ' /lib/'

In total: 

--ro-bind /lib/ld-musl-x86_64.so.1 /lib/ld-musl-x86_64.so.1 \
--ro-bind /lib/libblkid.so.1 /lib/libblkid.so.1 \
--ro-bind /lib/libmount.so.1 /lib/libmount.so.1 \
--ro-bind /lib/libz.so.1 /lib/libz.so.1 \
--ro-bind /usr/lib/ /usr/lib/ \
Note: It is not worth the time to limit /usr/lib/*, the churn is too great.
Warning: The ldd manpage talks about some security implications. It may not apply since they seem to be talking about glibc and musl-utils makes /lib/ld-musl-x86_64.so.1 ldd [1]. Is this something to worry about?


Since this is a shell script, lets use a helpful command: 

set -u

if the shell tries to expand an unset parameter, it will error (with a few exceptions).

Since this is for a GUI Wayland program, so lets also add some prerequisites:

Note: Make sure you have dealt with XDG_RUNTIME_DIR.
--setenv XDG_RUNTIME_DIR "$XDG_RUNTIME_DIR" \

for determining the directory for the wayland socket; 

--setenv WAYLAND_DISPLAY "$WAYLAND_DISPLAY" \

for determining the socket; 

 --ro-bind "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" \

mount readonly.

Lets also add some nice to haves: 

--unshare-all \

will create a new user/ipc/pid/net/utc namespaces and try to create a new cgroup namespace if possible; 

--new-session

will create a new terminal session for the sandbox, disconnecting from the controlling terminal so for example it can't inject input into the terminal; 

 --die-with-parent

will ensure child process (imv-wayland in this case) dies when bwrap parent dies.

We might also have a config file: 

--ro-bind-try "${XDG_CONFIG_HOME}/imv/config" "${XDG_CONFIG_HOME}/imv/config" \

this will add your local config to imv if you have one and if not will still continue.

Pass "$XDG_CONFIG_HOME" to sandbox: 

--setenv XDG_CONFIG_HOME "$XDG_CONFIG_HOME" \

but this isn't always defined, so lets fallback to the XDG Base Directory default: 

XDG_CONFIG_HOME="${XDG_CONFIG_HOME:=$HOME/.config}"

this will use "$XDG_CONFIG_HOME" if it's set, otherwise fallback to the default of "$HOME/.config". 

--ro-bind /bin/sh /bin/sh \

Needed to use config and have various information in the window title.

Todo: This was found using: Bubblewrap#Can't_find_what_path_is_missing, any better way?


~/.local/bin/bwrap-imv now looks like:

Contents of ~/.local/bin/bwrap-imv

#!/usr/bin/env sh # imv wrapped in bwrap. set -u XDG_CONFIG_HOME="${XDG_CONFIG_HOME:=$HOME/.config}" /usr/bin/bwrap \ --unshare-all \ --new-session \ --die-with-parent \ --setenv WAYLAND_DISPLAY "$WAYLAND_DISPLAY" \ --setenv XDG_CONFIG_HOME "$XDG_CONFIG_HOME" \ --setenv XDG_RUNTIME_DIR "$XDG_RUNTIME_DIR" \ --ro-bind /bin/sh /bin/sh \ --ro-bind-try "${XDG_CONFIG_HOME}/imv/config" "${XDG_CONFIG_HOME}/imv/config" \ --ro-bind /lib/ld-musl-x86_64.so.1 /lib/ld-musl-x86_64.so.1 \ --ro-bind /lib/libblkid.so.1 /lib/libblkid.so.1 \ --ro-bind /lib/libmount.so.1 /lib/libmount.so.1 \ --ro-bind /lib/libz.so.1 /lib/libz.so.1 \ --ro-bind "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" \ --ro-bind /usr/lib/ /usr/lib/ \ --ro-bind /usr/libexec/imv-wayland /usr/libexec/imv-wayland \ --ro-bind "${1:-./}" "$(realpath "${1:-./}")" \ /usr/libexec/imv-wayland "${1:-./}"

Now lets run bwrap-imv; go into a directory with an image:

$ bwrap-imv IMAGE sh: eval: line 0: can't create /dev/null: nonexistent directory ... sh: eval: line 0: can't create /dev/null: nonexistent directory xkbcommon: ERROR: failed to add default include path /usr/share/X11/xkb Assertion failed: keyboard->context (../src/keyboard.c: imv_keyboard_create: 20)

Add: 

 --ro-bind /usr/share/X11/xkb/ /usr/share/X11/xkb/ \

to bwrap-imv. XKB is a keyboard keymap support library.

After adding the above, run it again:

$ bwrap-imv IMAGE sh: eval: line 0: can't create /dev/null: nonexistent directory ... sh: eval: line 0: can't create /dev/null: nonexistent directory libEGL warning: wayland-egl: could not open /dev/dri/renderD128 (No such file or directory)

Add: 

--dev-bind /dev/dri/renderD128 /dev/dri/renderD128 \

and run again:

$ bwrap-imv IMAGE libEGL warning: wayland-egl: drmGetMagic failed

--ro-bind /sys/dev/char/ /sys/dev/char/ \

Access to character devices.

Todo: This was found using: Bubblewrap#Can't_find_what_path_is_missing, any better way?


--ro-bind /sys/devices/pci0000:00/ /sys/devices/pci0000:00/ \

Access to PCI resources.

Todo: This was found using: Bubblewrap#Can't_find_what_path_is_missing, any better way?


--clearenv \

Finally we can unset all environment variables, except for "$PWD" and any we set with --setenv.

Now imv should show images and your config file should work (if you have one). If you do not use commands, the finished ~/.local/bin/bwrap-imv should look like:

Contents of ~/.local/bin/bwrap-imv

#!/usr/bin/env sh # imv wrapped in bwrap. set -u XDG_CONFIG_HOME="${XDG_CONFIG_HOME:=$HOME/.config}" /usr/bin/bwrap \ --unshare-all \ --new-session \ --die-with-parent \ --clearenv \ --setenv WAYLAND_DISPLAY "$WAYLAND_DISPLAY" \ --setenv XDG_CONFIG_HOME "$XDG_CONFIG_HOME" \ --setenv XDG_RUNTIME_DIR "$XDG_RUNTIME_DIR" \ --ro-bind /bin/sh /bin/sh \ --dev-bind /dev/dri/renderD128 /dev/dri/renderD128 \ --ro-bind-try "${XDG_CONFIG_HOME}/imv/config" "${XDG_CONFIG_HOME}/imv/config" \ --ro-bind /lib/ld-musl-x86_64.so.1 /lib/ld-musl-x86_64.so.1 \ --ro-bind /lib/libblkid.so.1 /lib/libblkid.so.1 \ --ro-bind /lib/libmount.so.1 /lib/libmount.so.1 \ --ro-bind /lib/libz.so.1 /lib/libz.so.1 \ --ro-bind /sys/dev/char/ /sys/dev/char/ \ --ro-bind /sys/devices/pci0000:00/ /sys/devices/pci0000:00/ \ --ro-bind "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" \ --ro-bind /usr/lib/ /usr/lib/ \ --ro-bind /usr/libexec/imv-wayland /usr/libexec/imv-wayland \ --ro-bind /usr/share/X11/xkb/ /usr/share/X11/xkb/ \ --ro-bind "${1:-./}" "$(realpath "${1:-./}")" \ /usr/libexec/imv-wayland "${1:-./}"

If you do use commands however, you will notice it is only showing substitute characters.

Tip: Commands in imv are entered by pressing :.

If you try to use a command it will say: 

Fontconfig error: Cannot load default config file: No such file: (null)

Look at the fonts-conf manpage (which is from fontconfig-doc) we see that /etc/fonts/ is the system font configuration directory and "${XDG_CONFIG_HOME}/fontconfig/" is the per-user configuration directory. "${XDG_CONFIG_HOME}/fontconfig/" is added with --ro-bind-try so it doesn't have to exist: 

--ro-bind /etc/fonts/ /etc/fonts/ \
--ro-bind-try "${XDG_CONFIG_HOME}/fontconfig/" "${XDG_CONFIG_HOME}/fontconfig/" \

The default directories scanned for font files are /usr/share/fonts/ and "${XDG_DATA_HOME}/fonts/". "${XDG_DATA_HOME}/fonts/" added with --ro-bind-try: 

--ro-bind /usr/share/fonts/ /usr/share/fonts/ \
--ro-bind-try "${XDG_DATA_HOME}/fonts/" "${XDG_DATA_HOME}/fonts/" \

Pass "$XDG_DATA_HOME" to sandbox: 

--setenv XDG_DATA_HOME "$XDG_DATA_HOME" \

just like for "$XDG_CONFIG_HOME", this isn't always defined, so fallback to XDG Base Directory default: 

XDG_DATA_HOME="${XDG_DATA_HOME:=$HOME/.local/share}"

use "$XDG_DATA_HOME" if set, else use "$HOME/.local/share".

The user cache of font information is also needed, by default "${XDG_CACHE_HOME}/fontconfig/": 

--bind-try "${XDG_CACHE_HOME}/fontconfig/" "${XDG_CACHE_HOME}/fontconfig/" \

Pass "$XDG_CACHE_HOME" to sandbox: 

--setenv XDG_CACHE_HOME "$XDG_CACHE_HOME" \

just like for "$XDG_CONFIG_HOME", this isn't always defined; so fallback to XDG Base Directory default: 

XDG_CACHE_HOME="${XDG_CACHE_HOME:=$HOME/.cache}"

use "$XDG_CACHE_HOME" if set, else use "$HOME/.cache". 

--ro-bind /usr/share/icu/ /usr/share/icu/ \

Is also needed or when you do :<backspace> it will terminate the process. ICU provides Unicode and Globalization support.

Todo: This was found using: Bubblewrap#Can't_find_what_path_is_missing, any better way?


The updated ~/.local/bin/bwrap-imv should look like this:

Contents of ~/.local/bin/bwrap-imv

#!/usr/bin/env sh # imv wrapped in bwrap. set -u XDG_CACHE_HOME="${XDG_CACHE_HOME:=$HOME/.cache}" XDG_CONFIG_HOME="${XDG_CONFIG_HOME:=$HOME/.config}" XDG_DATA_HOME="${XDG_DATA_HOME:=$HOME/.local/share}" /usr/bin/bwrap \ --unshare-all \ --new-session \ --die-with-parent \ --clearenv \ --setenv WAYLAND_DISPLAY "$WAYLAND_DISPLAY" \ --setenv XDG_CACHE_HOME "$XDG_CACHE_HOME" \ --setenv XDG_CONFIG_HOME "$XDG_CONFIG_HOME" \ --setenv XDG_DATA_HOME "$XDG_DATA_HOME" \ --setenv XDG_RUNTIME_DIR "$XDG_RUNTIME_DIR" \ --ro-bind /bin/sh /bin/sh \ --dev-bind /dev/dri/renderD128 /dev/dri/renderD128 \ --ro-bind /etc/fonts/ /etc/fonts/ \ --bind-try "${XDG_CACHE_HOME}/fontconfig/" "${XDG_CACHE_HOME}/fontconfig/" \ --ro-bind-try "${XDG_CONFIG_HOME}/fontconfig/" "${XDG_CONFIG_HOME}/fontconfig/" \ --ro-bind-try "${XDG_CONFIG_HOME}/imv/config" "${XDG_CONFIG_HOME}/imv/config" \ --ro-bind-try "${XDG_DATA_HOME}/fonts/" "${XDG_DATA_HOME}/fonts/" \ --ro-bind /lib/ld-musl-x86_64.so.1 /lib/ld-musl-x86_64.so.1 \ --ro-bind /lib/libblkid.so.1 /lib/libblkid.so.1 \ --ro-bind /lib/libmount.so.1 /lib/libmount.so.1 \ --ro-bind /lib/libz.so.1 /lib/libz.so.1 \ --ro-bind /sys/dev/char/ /sys/dev/char/ \ --ro-bind /sys/devices/pci0000:00/ /sys/devices/pci0000:00/ \ --ro-bind "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" \ --ro-bind /usr/lib/ /usr/lib/ \ --ro-bind /usr/libexec/imv-wayland /usr/libexec/imv-wayland \ --ro-bind /usr/share/X11/xkb/ /usr/share/X11/xkb/ \ --ro-bind /usr/share/fonts/ /usr/share/fonts/ \ --ro-bind /usr/share/icu/ /usr/share/icu/ \ --ro-bind "${1:-./}" "$(realpath "${1:-./}")" \ /usr/libexec/imv-wayland "${1:-./}"

See what exists in the sandbox

Finally test what all is allowed by replacing /usr/libexec/imv-wayland "${1:-./}" with /bin/sh and adding --ro-bind /bin/ /bin/ \. Check around and see what the filesystem is like:

Contents of ~/.local/bin/bwrap-imv

... --ro-bind "${1:-./}" "$(realpath "${1:-./}")" \ --ro-bind /bin/ /bin/ \ /bin/sh

Invoke bwrap-imv:

$ bwrap-imv IMAGE

Show what environment variables are active:

$ printenv

See what directories are at root:

$ ls -la / ... bin ... dev ... etc ... home ... lib ... sys ... tmp ... usr

exit when done:

$ exit

Do not forget to change it back:

Contents of ~/.local/bin/bwrap-imv

... --ro-bind "${1:-./}" "$(realpath "${1:-./}")" \ /usr/libexec/imv-wayland "${1:-./}"

All done with a basic bwrap wrapper.

Seccomp

This material needs expanding ...

.desktop integration

This material is obsolete ...

This should probably be documented in Default_applications and linked here. Nothing is unique in using with bwrap. (Discuss)

Note: This section is also using imv as the example.

XDG Desktop Entry Specification are a set of standards describing how a particular program is to be launched, how it appears in menus, etc.

The default .desktop file for imv is at /usr/share/applications/imv.desktop. Move it to "${XDG_DATA_HOME}/applications/bwrap-imv.desktop".

Only 3 options will need to be changed: Name/Name[en_US], what shows up in the application menu in a graphical file manager (if you have one installed); Exec, program to execute:

Contents of "${XDG_DATA_HOME}/applications/bwrap-imv.desktop"

... Name=bwrap-imv Name[en_US]=bwrap-imv Exec=bwrap-imv %F ...

The program xdg-open (from the xdg-utils package) can be used to open files based on the MIME type + corresponding entry in "${XDG_CONFIG_HOME}/mimeapps.list" and "${XDG_DATA_HOME}/applications/mimeinfo.cache".

Install desktop-file-utils if it is not installed already, it comes with two commands that are needed desktop-file-validate and update-desktop-database:

# apk add desktop-file-utils

Validate

It is a good idea to validate imv.desktop using desktop-file-validate:

$ desktop-file-validate "${XDG_DATA_HOME}/applications/bwrap-imv.desktop"

Update database

This will make entries in "${XDG_DATA_HOME}/applications/" take precedence over system-wide files (/usr/share/applications/). However "${XDG_CONFIG_HOME}/mimeapps.list" has precedence over both.

Updating the database, will create "${XDG_DATA_HOME}/applications/mimeinfo.cache":

$ update-desktop-database "${XDG_DATA_HOME}/applications"

Troubleshooting

Can't find what path is missing

If all else fails start broad and work toward narrowing. See if bwrap works with the program at all:

$ bwrap \ --dev-bind / / PROGRAM

If that works start to narrow:

$ bwrap \ --ro-bind /bin/ /bin/ \ --dev-bind /dev/ /dev/ \ --ro-bind /lib/ /lib/ \ --ro-bind /sys/ /sys/ \ --ro-bind /usr/ /usr/ \ PROGRAM

Keep going till you have narrowed as much as possible.

See also

Retrieved from "https://wiki.alpinelinux.org/w/index.php?title=Bubblewrap&oldid=25651"