Upgrading Alpine - v1.9.x
 It should be merged with Upgrading Alpine. (Discuss) |
This document covers upgrading for Alpine Linux version 1.9 and later. Thanks to many improvements in Alpine Linux 1.9 and later, it is possible to easily upgrade in most scenarios.
All examples/instructions/actions mentioned in this document should be executed on the box that you are planning to upgrade (unless you are instructed otherwise).
Upgrading an Alpine Linux Hard-disk installation
When Alpine Linux is installed to hard drive, upgrading the installation is simple.
Edit the /etc/apk/repositories file using any editor of your choice (nano for instance) to edit the Alpine Linux package repositories.
Contents of /etc/apk/repositories
In the above file, to upgrade Alpine Linux from version 3.19 to 3.20, simply replace the number 3.19 by 3.20 in all the places, so that the updated repositories file looks like below:
Contents of /etc/apk/repositories
Ensure you have the latest available version of the Alpine Linux Package Manager first before upgrading anything else:
apk add -u apk-tools
Upgrading to Alpine Linux 2.2 and later from 2.1
Since apk tool has been significantly changed first make sure you have upgraded apk-tools package to latest version available in 2.1 repositories:
apk update --update-cache apk add --upgrade apk-tools
Change repositories:
vi /etc/apk/repositories
http://nl.alpinelinux.org/alpine/v2.2/main # or any other mirror
Proceed with update and upgrade:
apk update --update-cache apk upgrade --available --update-cache
Reboot the system to load new kernel
sync reboot
Upgrading to Alpine Linux 2.2 and later from 2.0 or 1.10.x
Since apk tool has been significantly changed you need to download and install manually the latest version of apk-tools-static package.
And we install busybox-static just in case something goes wrong.
If current version is 1.10.x remove GNU Wget before attempting an upgrade:
apk del wget
Download busybox-static package:
wget http://nl.alpinelinux.org/alpine/v2.2/main/x86/busybox-static-1.18.4-r2.apk apk add busybox-static-1.18.4-r2.apk --update-cache
Download latest apk-tools package and install it:
wget http://nl.alpinelinux.org/alpine/v2.2/main/x86/apk-tools-static-2.1.0-r1.apk apk add apk-tools-static-2.1.0-r1.apk --update-cache
Change repositories:
vi /etc/apk/repositories
http://nl.alpinelinux.org/alpine/v2.2/main # or any other mirror
Proceed with update and upgrade:
apk.static update --update-cache apk.static upgrade --available --update-cache
Reboot the system to load new kernel
sync reboot
Upgrading to Alpine Linux 2.0 or 2.1 from earlier versions
For upgrading to Alpine Linux 2.0 or 2.1 from earlier versions, the following steps apply.
Remove GNU Wget before attempting an upgrade:
apk del wget
Upgrade all remaining packages, including the kernel. The --available switch is used to force all packages to be upgraded, even if they have the same version number, due to changes in uClibc:
apk upgrade --update-cache --available sync
All Other Upgrades
Upgrade all remaining packages, including the kernel if applicable:
apk upgrade sync
Upgrading Alpine Linux on CD
You may have an installation where the boot media being used (such as a CD, for example) is separate from the media used to store the configuration information. In this case, simply download the latest ISO, and replace the boot media contents with the contents of the latest ISO. If you are booting from a CD, this would simply mean replacing the CD with a CD made from the new image and rebooting the Alpine Linux box.
Update remaining packages from Web repository
If you are using APK caching you should also perform the following steps:
Edit the /etc/apk/repositories file using any editor of your choice (nano for instance) to edit the Alpine Linux package repositories.
Contents of /etc/apk/repositories
In the above file, to upgrade Alpine Linux from version 3.19 to 3.20, simply replace the number 3.19 by 3.20 in all the places, so that the updated repositories file looks like below:
Contents of /etc/apk/repositories
Ensure you have the latest available version of the Alpine Linux Package Manager first before upgrading anything else:
apk add -u apk-tools
apk upgrade sync
Upgrading Alpine Linux on Flash Memory (such as CF/USB)
Your installation may consist of Alpine Linux running on Compact Flash or USB media. In most cases, it should be sufficient to upgrade most packages using the Alpine Linux Hard-disk Installation upgrade procedures described above. However, for new packages to survive after a reboot, you should enable APK caching.
Setup environment variables
To make the documentation a bit more "generic" we start by setting some environment variables.
vi /etc/lbu/lbu.conf
Make sure that the variable LBU_MEDIA is not commented (by removing the leading '#').
You also need to set a appropriate value for your LBU_MEDIA. The media you choose will be the media where you store your settings/configuration.
Examples:
LBU_MEDIA=usb
or:
LBU_MEDIA=sda1
Now that you have your /etc/lbu/lbu.conf configured for your needs, we will set the environment variables (note the leading .).
. /etc/lbu/lbu.conf
You can test if your environment variable was set:
echo $LBU_MEDIA
It should output something like usb, sda1, or whatever you just configured.
Back up your config
Before starting to upgrade, it's wise to save your configuration.
lbu ci
Upgrade Operating System
Start by checking that you have enough space on your media.
You need at least 400MB available space.
df -h
Download and verify new release
Make sure the media is mounted readwrite.
mount --remount rw /media/$LBU_MEDIA
setup-bootable -u {{#latestalp:alpine|url}} /media/$LBU_MEDIA
Once the command completes, proceed to the Load new kernel section.Start downloading a new '.iso' and a '.sha1' file
cd /media/$LBU_MEDIA wget -c {{#latestalp:alpine|url}} wget {{#latestalp:alpine|url}}.sha1
Check integrity of the downloaded files (it might take some time)
sha1sum -c {{#latestalp:alpine|file}}.sha1
The output of the above command should say 'OK'.
If says 'FAILED', delete the iso file and download it again.
Copy the new release
setup-bootable -u {{#latestalp:alpine|file}} /media/$LBU_MEDIA
Once the command completes, proceed to the Load new kernel section.Mount the ISO.
mount -t iso9660 {{#latestalp:alpine|file}} /mnt
Back up files that you have modified. For example, you might have modified syslinux.cfg to show console output on a serial port.
cp /media/$LBU_MEDIA/syslinux.cfg /media/$LBU_MEDIA/syslinux.cfg.my
Install the rsync package if necessary, and copy the files:
cd /mnt apk add rsync rsync --delete -rltv .alpine-release * /media/$LBU_MEDIA/
Restore your backed up files (in case you had any)
mv -f /media/$LBU_MEDIA/syslinux.cfg.my /media/$LBU_MEDIA/syslinux.cfg
Make sure that all files are permanently saved in right place
sync
Clean up
Clean up the downloaded/unpacked files
cd .. umount /mnt rm /media/$LBU_MEDIA/{{#latestalp:alpine|file}} rm /media/$LBU_MEDIA/{{#latestalp:alpine|file}}.sha1
Save changes
Now that all upgrades are done, we should save our settings to our media (which you hopefully have backed up prior to doing this upgrade).
lbu ci
Load new kernel
In most cases you will need to reboot Alpine Linux (especially if there are changes in the kernel):
reboot
Update remaining packages from Web repository
If you are using APK caching you should perform the following steps:
Edit the /etc/apk/repositories file using any editor of your choice (nano for instance) to edit the Alpine Linux package repositories.
Contents of /etc/apk/repositories
In the above file, to upgrade Alpine Linux from version 3.19 to 3.20, simply replace the number 3.19 by 3.20 in all the places, so that the updated repositories file looks like below:
Contents of /etc/apk/repositories
Ensure you have the latest available version of the Alpine Linux Package Manager first before upgrading anything else:
apk add -u apk-tools
apk upgrade sync