Abuild and Helpers

This material is proposed for deletion ... See discussion page. (Discuss) Make sure no other pages link here and check the page's history before deleting.

The abuild package provides scripts you need when creating packages for Alpine Linux. The abuild and its friends are installed automatically along with the alpine-sdk package.

apk add alpine-sdk

The git repository contains always the lastest version of the scripts, example-files, and makefiles.

Package build helpers

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

• -a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
• -i Install public key into /etc/apk/keys using sudo
• -h Show this help
• -n Non-interactive. Use defaults
• -q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

• -h Show this help
• -k The private key to use for signing
• -p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

• --hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
• --cut Remove the end of file tar record

abump

This material is proposed for deletion ... See discussion page. (Discuss) Make sure no other pages link here and check the page's history before deleting.

The abuild package provides scripts you need when creating packages for Alpine Linux. The abuild and its friends are installed automatically along with the alpine-sdk package.

apk add alpine-sdk

The git repository contains always the lastest version of the scripts, example-files, and makefiles.

Package build helpers

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

• -a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
• -i Install public key into /etc/apk/keys using sudo
• -h Show this help
• -n Non-interactive. Use defaults
• -q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

• -h Show this help
• -k The private key to use for signing
• -p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

• --hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
• --cut Remove the end of file tar record

apkgrel

Apkgrel

APKBUILD generation

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file to the given directory, and fill some variables if those are provided.

apkbuild-cpan

Apkbuild-cpan

Misc tools

buildlab

More details can be found at the buildlab page.

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

• -a Set the aports base dir to APORTSDIR instead of $HOME/aports
• -d Set destination repository base dir to REPODIR instead of $HOME/packages
• -h Show this help and exit
• -l Send build to logfile, prefixed by LOGPREFIX
• -p Purge obsolete packages from REPODIR after build
• -r Dependencies are found in DEPREPO

apkgrel

Apkgrel

abuild

This material is proposed for deletion ... See discussion page. (Discuss) Make sure no other pages link here and check the page's history before deleting.

The abuild package provides scripts you need when creating packages for Alpine Linux. The abuild and its friends are installed automatically along with the alpine-sdk package.

apk add alpine-sdk

The git repository contains always the lastest version of the scripts, example-files, and makefiles.

Package build helpers

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

• -a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
• -i Install public key into /etc/apk/keys using sudo
• -h Show this help
• -n Non-interactive. Use defaults
• -q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

• -h Show this help
• -k The private key to use for signing
• -p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

• --hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
• --cut Remove the end of file tar record

apkgrel

Apkgrel

APKBUILD generation

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file to the given directory, and fill some variables if those are provided.

apkbuild-cpan

Apkbuild-cpan

Misc tools

buildlab

More details can be found at the buildlab page.

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

• -a Set the aports base dir to APORTSDIR instead of $HOME/aports
• -d Set destination repository base dir to REPODIR instead of $HOME/packages
• -h Show this help and exit
• -l Send build to logfile, prefixed by LOGPREFIX
• -p Purge obsolete packages from REPODIR after build
• -r Dependencies are found in DEPREPO

APKBUILD generation

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file to the given directory, and fill some variables if those are provided.

This material is proposed for deletion ... See discussion page. (Discuss) Make sure no other pages link here and check the page's history before deleting.

The abuild package provides scripts you need when creating packages for Alpine Linux. The abuild and its friends are installed automatically along with the alpine-sdk package.

apk add alpine-sdk

The git repository contains always the lastest version of the scripts, example-files, and makefiles.

Package build helpers

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

• -a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
• -i Install public key into /etc/apk/keys using sudo
• -h Show this help
• -n Non-interactive. Use defaults
• -q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

• -h Show this help
• -k The private key to use for signing
• -p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

• --hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
• --cut Remove the end of file tar record

apkgrel

Apkgrel

APKBUILD generation

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file to the given directory, and fill some variables if those are provided.

apkbuild-cpan

Apkbuild-cpan

Misc tools

buildlab

More details can be found at the buildlab page.

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

• -a Set the aports base dir to APORTSDIR instead of $HOME/aports
• -d Set destination repository base dir to REPODIR instead of $HOME/packages
• -h Show this help and exit
• -l Send build to logfile, prefixed by LOGPREFIX
• -p Purge obsolete packages from REPODIR after build
• -r Dependencies are found in DEPREPO

apkbuild-cpan

Apkbuild-cpan

apkbuild-pypi

This material is proposed for deletion ... See discussion page. (Discuss) Make sure no other pages link here and check the page's history before deleting.

The abuild package provides scripts you need when creating packages for Alpine Linux. The abuild and its friends are installed automatically along with the alpine-sdk package.

apk add alpine-sdk

The git repository contains always the lastest version of the scripts, example-files, and makefiles.

Package build helpers

abuild-keygen

For abuild a public/private rsa key pair is needed. abuild-keygen does the generation of those keys for you.

abuild-keygen -a -i

abuild-keygen options

• -a Set PACKAGER_PRIVKEY=<generated key> in abuild.conf
• -i Install public key into /etc/apk/keys using sudo
• -h Show this help
• -n Non-interactive. Use defaults
• -q Quiet mode

Creating keys manually

In older versions of Alpine, we had to manually create keys for signing packages and indexes. This explains how. Nowadays you can just use abuild-keygen.

Since the public key needs to be unique for each developer, the email address should be used as name for the public key.

Create the private key:

openssl genrsa -out emailaddress.priv 2048

Tip: Append -aes256 if you want it encrypted, but then you'll need to enter the password for every package you sign

Create the public key:

openssl rsa -in emailaddress.priv -pubout -out /etc/apk/keys/emailaddress

The public key should be distributed and installed into /etc/apk/keys on the alpine box that will install the packages. The private key, when created by abuild, is installed into ~/.abuild/$something.rsa. This basically means that the main developer's public keys should be in /etc/apk/keys on all Alpine boxes.

abuild-sign

abuild-sign is for signing indexes.

abuild-sign [-hq] [-k PRIVKEY] [-p PUBKEY] INDEXFILE...

abuild-sign options

• -h Show this help
• -k The private key to use for signing
• -p The name of public key. apk add will look for /etc/apk/keys/PUBKEY

abuild-tar

apkbuild-tar [--hash[=<algorithm>]] [--cut]

apkbuild-tar options

• --hash[=sha1|md5] Read tar archive from stdin, precalculate hash for regular entries and output tar archive on stdout
• --cut Remove the end of file tar record

apkgrel

Apkgrel

APKBUILD generation

newapkbuild

To create the actual APKBUILD file newapkbuild can serve you a template to start with. It will create a directory with the given package name, place an example/template APKBUILD file to the given directory, and fill some variables if those are provided.

apkbuild-cpan

Apkbuild-cpan

Misc tools

buildlab

More details can be found at the buildlab page.

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

• -a Set the aports base dir to APORTSDIR instead of $HOME/aports
• -d Set destination repository base dir to REPODIR instead of $HOME/packages
• -h Show this help and exit
• -l Send build to logfile, prefixed by LOGPREFIX
• -p Purge obsolete packages from REPODIR after build
• -r Dependencies are found in DEPREPO

Misc tools

buildlab

More details can be found at the buildlab page.

buildrepo

buildrepo creates a local package repository for you.

buildrepo [-a APORTSDIR] [-d REPODIR] [-hp] [-l LOGPREFIX ] [-r DEPREPO] REPOSITORY...

buildrepo options

• -a Set the aports base dir to APORTSDIR instead of $HOME/aports
• -d Set destination repository base dir to REPODIR instead of $HOME/packages
• -h Show this help and exit
• -l Send build to logfile, prefixed by LOGPREFIX
• -p Purge obsolete packages from REPODIR after build
• -r Dependencies are found in DEPREPO