User talk:Txnintn
Title
Install Alpine Linux on a Raspberry PI 4 in Diskless Mode.
Discussion:
Preparation:
The Raspberry Pi requires fat 16 / 32 boot partition with boot and LBA flags enabled. The Raspberry PI will boot from either a USB or a Micro SD port.
Prepare a USB or Micro SD drive 1st partition fat 32 partition type 0c with boot and LBA flags.
Use the rest of the drive in the second partition Ext4 partition type 83.
Extract the contents of alpine-rpi-3.x.x-aarch.tar.gz to the first partition.
To start the install,
TYPE: setup-alpine and PRESS: enter
At, Select keyboard layout: [none], prompt.
TYPE: us and PRESS: enter
At, Select variant (or 'abort'):, prompt.
TYPE: us and PRESS: enter
At, Enter system hostname (fully qualified form, e.g. 'foo.example.org') [localhost] prompt.
PRESS: enter, to use the default localhost.
At, Enter '?' for help on bridges, bonding and vlans.
Which one do you want to initialize? (or '?' or 'done' [eth0], prompt.
PRESS: enter, to use the default, ethernet0 connection.
Ip address for eth0? (or 'dhcp', 'none', '?') [dhcp], prompt.
PRESS: enter to use the default, dhcp.
At the second, Enter '?' for help on bridges, bonding and vlans.
Which one do you want to initialize? (or '?' or 'done' [wlan0], prompt.
TYPE: done and PRESS: enter.
Then at, Do you want to do and manual network configuration? (y/n) [n], prompt.
PRESS enter for the default, [n], for no.
At, Change password for root, prompt.
TYPE: the root password, and PRESS: enter
At, Retype password, prompt.
TYPE: the root password and PRESS: enter
At, Which timezone are you in? ('?' for a list) [UTC]. prompt.
TYPE: America, with a capital A, and press enter.
At, What sub-timezone of 'America' are you in? ('?' for list), prompt.
TYPE: Chicago, with a capital C, and press enter.
At, HTTP/FTP proxy URL? (e.g. /http://proxy:8000', or 'none') [none], prompt.
PRESS: enter for the default, none.
At, Which NTP Client to run? ('busybox', 'openntpd', 'chrony' or 'none') [chrony], prompt.
PRESS: enter for the default, chrony.
When the list of mirrors stop and at --More--, prompt
PRESS: the letter "r".
r) Add random from the above list
f) Detect and add the fastest mirror from above list
e) Edit /etc/apk/repositories with text editor
At, Enter mirror number (1-72) or URL to add (or r/f/e/done) [1], prompt.
PRESS: enter for the default number 1.
At, Setup a user? (enter a lower-case loginname, or 'no') [no], prompt.
PRESS: enter for the default no.
At, which ssh server? ('openssh', 'dropbear' or 'none'), prompt.
TYPE: none and PRESS: enter to continue.
No disks available. Try boot media /media/sda1? (y/n) [n]
Enter where to store configs ('floppy', 'sda1', 'usb', or 'none') [sda1]
TYPE: none and PRESS: enter to continue.
Enter apk cache directory (or '?' or 'none') [/media/usb/cache]
TYPE: none and press enter to continue.
The install is complete.
Warning: By default, an lbu commit only stores modifications below /etc, with the exception of the /etc/init.d/ directory.
https://wiki.alpinelinux.org/wiki/Alpine_local_backup
Warning: By default, an lbu commit only stores modifications below /etc, with the exception of the /etc/init.d/ directory.
However, lbu include enables modifying that set of included files, and can be used to specify additional files or folders.
Create the apk cache file location and a LBU backup directory.
At the command prompt, TYPE: mkdir /root/config-backups and then PRESS: enter
At the command prompt, TYPE: mkdir /etc/apk/cache and then PRESS: enter
At the command prompt, TYPE: vi /etc/lbu/lbu.conf and then PRESS: enter
PRESS: the ESC key and press i to change to insert mode.
Remove the pound sign at LBU_BACKUPDIR=/root/config-backups
Remove the pound sign at BACKUP_LIMIT=3
PRESS the ESC key and TYPE : followed by wq and PRESS enter.
PRESS lbu ci
PRESS lbu commit -d