Odroid-C2
 Please feel free to help us clean it up. |
(Parts of this page are WIP, still incomplete and some might be incorrect.)
Introduction
The Odroid-C2 single board computer is not very well supported by Alpine/Linux. However the "Generic ARM (aarch64)" build contains almost everything we need !
What do we need ?
- kernel : provided kernel by the Alpine team does not boot
- u-boot : provided u-boot does not autoboot without serial
- system files : everything is okay
On the hardware side:
- Odroid-C2
- Official PSU or just a micro-SD cable (notes : the barrel plug (inner(positive) diameter 0.8mm and outer(negative) diameter 2.5mm) is recommended, without the J1 jumper)
- micro-SD (or eMMC)
- USB to TTL (official or CP2102 chipset or an old rpi)
Toolchain
Using GNU/Linux is recommended and this guide and here are the required dependencies: Example on debian : apt install bc bison flex make gcc gcc-aarch64-linux-gnu libncurses-dev
Build u-boot from source
Work in progress
Build the latest LTS kernel from source
Work in progress
Assembly
Work in progress
Booting
Work in progress
Troubleshooting
Work in progress