Alpine setup scripts

This material is work-in-progress ... Do not follow instructions here until this notice is removed. (Last edited by Dubiousjim on 5 Mar 2012.)

This page summarizes the low-level behavior of the /sbin/setup-* scripts on the Alpine ISO (and in a normal Alpine install).

setup-alpine

For a higher-level walkthrough (using the "sys" installmode), see Basic HDD install.

This script accepts the following command-line switches (you can run setup-alpine -h to see a usage message).

-a

Create an overlay file: this creates a temporary directory and saves its location in ROOT; however, the script doesn't export this variable so I think this feature isn't currently functional.

-c answerfile

Create a new "answerfile", with default choices. You can edit the file and then invoke setup-alpine -f answerfile.

-f answerfile

Use an existing "answerfile", which may override some or all of the interactive prompts.

-q

Run in "quick mode." See below for details.

The script's behavior is to do the following, in order. Bracketed options represent extra configuration choices that can be supplied when running the auxiliary setup scripts manually, or by supplying an "answerfile".

1. setup-keymap [us us]
2. setup-hostname [-n alpine-test]
3. setup-interfaces [-i < interfaces-file]
4. /etc/init.d/networking --quiet start &
5. if none of the networking interfaces were configured using dhcp, then: setup-dns [-d example.com -n "8.8.8.8 [...]"]
6. set the root password
7. if not in quick mode, then: setup-timezone [-z UTC | -z America/New_York | -p EST+5]
8. enable the new hostname (/etc/init.d/hostname --quiet restart)
9. add networking and urandom to the boot rc level, and acpid and cron to the default rc level, and start the boot and default rc services
10. extract the fully-qualified domain name and hostname from /etc/resolv.conf and hostname, and update /etc/hosts
11. setup-apkrepos [-r (to select a mirror randomly)]
12. if not in quick mode, then: setup-sshd [-c openssh | dropbear | none]
13. if not in quick mode, then: setup-ntp [-c chrony | openntpd | none]
14. if not in quick mode, then: DEFAULT_DISK=none setup-disk -q [-m data /dev/sda]
15. if installation mode selected during setup-disk was "data" instead of "sys", then: setup-lbu [/media/sdb1]
16. if installation mode selected during setup-disk was "data" instead of "sys", then: setup-apkcache [/media/sdb1/cache | none]

setup-interfaces

setup-interfaces [-i < interfaces-file]

An interfaces file has the format of /etc/network/interfaces, such as:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp
    hostname alpine-test

setup-timezone

setup-timezone [-z UTC | -z America/New_York | -p EST+5]

Can pre-select the timezone using either of these switches:

• -z subfolder of /usr/share/zoneinfo
• -p POSIX TZ format

setup-disk

DEFAULT_DISK=none setup-disk -q [-m data | sys] [mountpoint directory | /dev/sda ...]

This script accepts the following command-line switches:

-k kernel flavor

-o apkovl file

Restore system from apkovl file

-m data | sys

Don't prompt for installation mode. With -m data, the supplied devices are formatted using ext4 to use as a /var volume.

-r

Use RAID1 with a single disk (degraded mode)

-L

Create and use volumes in a LVM group

-s swap size in MB

Use 0 to disable swap

-q

Exit quietly if no disks are found

-v

Verbose mode

The script also honors the following environment variables:

BOOT_SIZE

Size of the boot partition in MB; defaults to 100. Only used if -m sys is specified or interactively selected.

SWAP_SIZE

Size of the swap volume in MB; set to 0 to disable swap. If not specified, will default to twice RAM, up to 4096, but won't be more than 1/3 the size of the smallest disk, and if less than 64 will just be 0. Only used if -m sys is specified or interactively selected.

ROOTFS

Filesystem to use for the / volume; defaults to ext4. Only used if -m sys is specified or interactively selected. Supported filesystems are: ext2 ext3 ext4 btrfs.

BOOTFS

Filesystem to use for the /boot volume; defaults to ext4. Only used if -m sys is specified or interactively selected. Supported filesystems are: ext2 ext3 ext4 btrfs.

MBR

Path of MBR binary code, defaults to /usr/share/syslinux/mbr.bin.

Partitioning

If you have complex partitioning needs, you can partition, format, and mount your volumes manually, then just supply the root mountpoint to setup-disk. Doing so implicitly behaves as though -m sys had also been specified.

RAID

setup-disk will automatically build a RAID array if you supply the -r switch, or if you specify more than one device. The array will always be RAID1 (and --metadata=0.90) for the /boot volumes, but will be RAID5 for non-boot volumes when 3 or more devices are supplied.

If you instead want to build your RAID array manually, see Setting up a software raid1 array. Then format and mount the disks, and supply the root mountpoint to setup-disk.

LVM

setup-disk will automatically build and use volumes in a LVM group if you supply the -L switch. The group and volumes created by the script will have the following names:

• volume group: vg0
• swap volume: lv_swap (only created when swap size > 0)
• root volume: lv_root (only created when -m sys is specified or interactively selected)
• var volume: lv_var (only created when -m data is specified or interactively selected); also these volumes are currently always formatted as ext4.

The lv_var or lv_root volumes are created to occupy all remaining space in the volume group.

If you need to change any of these settings, you can use vgrename, lvrename, lvreduce or lvresize.

If you instead want to build your LVM system manually, see Setting up Logical Volumes with LVM. Then format and mount the disks, and supply the root mountpoint to setup-disk.

setup-bootable

This is a standalone script; it's not invoked by setup-alpine but must be run manually.

Its purpose is to create media that boots into tmpfs by copying the contents of an ISO onto a USB key, CF, or similar media.

For a higher-level walkthrough, see Creating a bootable Alpine Linux USB Stick from the command line.

This script accepts the following arguments and command-line switches (you can run setup-bootable -h to see a usage message).

setup-bootable source [dest]

The argument source can be a directory or an ISO (will be mounted to MNT or /mnt) or a URL (will be downloaded with WGET or wget). The argument dest can be a directory mountpoint, or will default to /media/usb if not supplied.

-k

Keep alpine_dev in syslinux.cfg; otherwise, replace with UUID.

-u

Upgrade mode: keep existing syslinux.cfg and don't run syslinux

-f

Overwrite syslinux.cfg even if -u was specified.

-s

Force the running of syslinux even if -u was specified.

-v

Verbose mode

The script will ensure that source and dest are available; will copy the contents of source to dest, ensuring first that there's enough space; and unless -u was specified, will make dest bootable.

setup-cryptswap

This is a standalone script; it's not invoked by setup-alpine but must be run manually.

setup-cryptswap [partition | none]

setup-xorg-base

This is a standalone script; it's not invoked by setup-alpine but must be run manually.

Installs the following packages: xorg-server xf86-video-vesa xf86-input-evdev xf86-input-mouse xf86-input-keyboard udev.

Additional packages can be supplied as arguments to setup-xorg-base. You might need, for example, some of: xf86-input-synaptics xf86-video-something xinit.

Documentation needed

setup-gparted-desktop

Uses openbox.

This is a standalone script; it's not invoked by setup-alpine but must be run manually.

setup-mta

Uses ssmtp.

This is a standalone script; it's not invoked by setup-alpine but must be run manually.

setup-alpine-web

This is a standalone script; it's not invoked by setup-alpine but must be run manually.

setup-acf

This is a standalone script; it's not invoked by setup-alpine but must be run manually.

setup-ads

This is a standalone script; it's not invoked by setup-alpine but must be run manually.