Setting up NRPE daemon: Difference between revisions
m (clarified a few parts) |
(make check_routes.sh posix compat, fix one bug and make code more readable) |
||
Line 1: | Line 1: | ||
Install daemon: | Install daemon: | ||
apk add nrpe && rc-update add nrpe default | {{Cmd|apk add nrpe && rc-update add nrpe default}} | ||
Set up config file to bind to local IP, only allow needed hosts to connect (in /etc/nrpe.cfg): | Set up config file to bind to local IP, only allow needed hosts to connect (in /etc/nrpe.cfg): | ||
server_address=10.14.8.3 | server_address=10.14.8.3 | ||
Line 7: | Line 7: | ||
command[check_routes]=/usr/bin/check_routes.sh | command[check_routes]=/usr/bin/check_routes.sh | ||
Create the above script, and populate: | Create the above script, and populate: | ||
#!/bin/sh | |||
# | # | ||
numroutes_ok=80 | |||
numroutes_warn=15 | |||
NUMROUTES=`ip route | grep -n '' | awk -F ':' '{print $1}' | tail -n 1` | NUMROUTES=`ip route | grep -n '' | awk -F ':' '{print $1}' | tail -n 1` | ||
if [ | if [ -z "$NUMROUTES" ]; then | ||
echo "WARNING: No routing information received" | |||
elif | exit 1 | ||
elif [ $NUMROUTES -ge $numroutes_ok ]; then | |||
elif | echo "OK: $NUMROUTES routes in routing table" | ||
exit 0 | |||
else echo "CRITICAL: $NUMROUTES routes in routing table" | elif [ $NUMROUTES -ge $numroutes_warn ]; then | ||
echo "WARNING: $NUMROUTES routes in routing table" | |||
exit 1 | |||
else | |||
echo "CRITICAL: $NUMROUTES routes in routing table" | |||
exit 2 | |||
fi | fi | ||
Restart NRPE. | Restart NRPE. | ||
Allow port 5666 (or whatever port you've specified for nrpe in /etc/nrpe.cfg) through Shorewall (in /etc/shorewall/rules) through to monitoring hosts. | Allow port 5666 (or whatever port you've specified for nrpe in /etc/nrpe.cfg) through Shorewall (in ''/etc/shorewall/rules'') through to monitoring hosts. | ||
On the monitoring host, run the following command to test, where 10.14.8.3 is the IP of the host to monitor: | On the monitoring host, run the following command to test, where 10.14.8.3 is the IP of the host to monitor: | ||
{{Cmd|/usr/local/nagios/libexec/check_nrpe -H 10.14.8.3 -p 5666 -c check_routes}} | |||
You should get output like: | You should get output like: | ||
OK: 173 routes in routing table | OK: 173 routes in routing table |
Revision as of 01:35, 24 August 2010
Install daemon:
apk add nrpe && rc-update add nrpe default
Set up config file to bind to local IP, only allow needed hosts to connect (in /etc/nrpe.cfg):
server_address=10.14.8.3 allowed_hosts=10.14.8.149,10.14.8.150
Add a definition for a check command to /etc/nrpe.cfg, for example:
command[check_routes]=/usr/bin/check_routes.sh
Create the above script, and populate:
#!/bin/sh # numroutes_ok=80 numroutes_warn=15 NUMROUTES=`ip route | grep -n | awk -F ':' '{print $1}' | tail -n 1` if [ -z "$NUMROUTES" ]; then echo "WARNING: No routing information received" exit 1 elif [ $NUMROUTES -ge $numroutes_ok ]; then echo "OK: $NUMROUTES routes in routing table" exit 0 elif [ $NUMROUTES -ge $numroutes_warn ]; then echo "WARNING: $NUMROUTES routes in routing table" exit 1 else echo "CRITICAL: $NUMROUTES routes in routing table" exit 2 fi
Restart NRPE. Allow port 5666 (or whatever port you've specified for nrpe in /etc/nrpe.cfg) through Shorewall (in /etc/shorewall/rules) through to monitoring hosts. On the monitoring host, run the following command to test, where 10.14.8.3 is the IP of the host to monitor:
/usr/local/nagios/libexec/check_nrpe -H 10.14.8.3 -p 5666 -c check_routes
You should get output like:
OK: 173 routes in routing table
If you are having trouble, enable debugging in /etc/nrpe.cfg, and check /var/log/messages for errors. Most likely error(s) has to do with permissions of what you are trying to execute.
Example of monitoring opennhrp connection:
#!/bin/bash # $1 is hostname to check if `echo $1` == "" ; then echo "Hostname must be specified as argument" && exit 1; fi ping -c 1 -w 5 $1 > /dev/null HOSTOUTPUT="`host $1`" HOSTNETWORK="`echo $HOSTOUTPUT | awk -F ' ' '{print $NF}' | awk -F '.' '{print $1"."$2}'`" ROUTETONETWORK="`ip route | grep $HOSTNETWORK'\.'`" NEXTHOP="`echo $ROUTETONETWORK | awk -F ' ' '{print $3}'`" TUNNELSTATUS="`/usr/sbin/opennhrpctl show | grep -A 3 $NEXTHOP | grep Flags | awk -F ' ' '{print $NF}'`" echo $TUNNELSTATUS