K8s

Alpine Linux 🌲 K8s in 10 Minutes

Summary

This guide will allow you to deploy a fresh Alpine Linux install into a Kubernetes K8 cluster in less than 10 minutes.

Why ✨

I went to learn Kubernetes recently and I built a k3 cluster using Alpine in an hour or so, it was a great experience. I figured the next step would be K8s, but I found no material on K8s for Alpine. This guide is the result of my first pass and the incorporations of high quality notes from the contributers. Kubernetes 🦄 is awesome.

Contributers

• Matthew Rogers Github LinkedIn
• Mike Zolla Github LinkedIn
• Matthew Emmett Github LinkedIn
• Richard Aik Github LinkedIn

---

Build K8s on Alpine Linux 🌲

Prerequisites 🔍

You need an Alpine Linux install (this guide is written against version 3.17 standard image) with internet access. I recommend at least 2 CPU with 4GB of ram and 10GB of disk for each node.

For HA control planes you'll need a mininum of three nodes

1. Setup the Repositories 📗

Update you repositories under /etc/apk/repositories to include community, edge community and testing.

Contents of /etc/apk/repositories

#/media/cdrom/apks http://dl-cdn.alpinelinux.org/alpine/v3.20/main http://dl-cdn.alpinelinux.org/alpine/v3.20/community #http://dl-cdn.alpinelinux.org/alpine/edge/main http://dl-cdn.alpinelinux.org/alpine/edge/community http://dl-cdn.alpinelinux.org/alpine/edge/testing

2. Node Setup 🖥️

This series of commands solves a series is incremental problems and sets up the system (if the first control node) for kubectl/kubeadm to run properly on next login by linking the config.

The result here gives you a functional node that can be joined to an existing cluster or can become the first control plane of a new cluster. 🎶

Note: 🔔 This build assumes CNI usage of flannel for networking. Skip the flannel packages if you want to use calico 🔔

Add kernel module for networking stuff

# echo "br_netfilter" > /etc/modules-load.d/k8s.conf # modprobe br_netfilter # sysctl net.ipv4.ip_forward=1 # echo "net.ipv4.ip_forward=1" >> /etc/sysctl.conf

Kernel stuff

# echo "net.bridge.bridge-nf-call-iptables=1" >> /etc/sysctl.conf # sysctl net.bridge.bridge-nf-call-iptables=1

Installing kubernetes packages

# apk add cni-plugin-flannel # apk add cni-plugins # apk add flannel # apk add flannel-contrib-cni # apk add kubelet # apk add kubeadm # apk add kubectl # apk add containerd # apk add uuidgen # apk add nfs-utils

Get rid of swap

# cp -av /etc/fstab /etc/fstab.bak # sed -i '/swap/s/^/#/' /etc/fstab # swapoff -a

Fix prometheus errors

# mount --make-rshared /

1. echo "#!/bin/sh" > /etc/local.d/sharemetrics.start
2. echo "mount --make-rshared /" >> /etc/local.d/sharemetrics.start
3. chmod +x /etc/local.d/sharemetrics.start
4. rc-update add local

Fix id error messages

# uuidgen > /etc/machine-id

Add kubernetes services on all controlplane and worker nodes

# rc-update add containerd # rc-update add kubelet # rc-service containerd start

Enable time sync (Not required in 3.20 if using default chrony)

# rc-update add ntpd # rc-service ntpd start

Option 1 - Using flannel as your CNI

NOTE: This may no longer be necessary on newer versions of the flannel package

# ln -s /usr/libexec/cni/flannel-amd64 /usr/libexec/cni/flannel

Option 2 - Using calico as your CNI NOTE: This is required in 3.20 if you use calico

# ln -s /opt/cni/bin/calico /usr/libexec/cni/calico # ln -s /opt/cni/bin/calico-ipam /usr/libexec/cni/calico-ipam

Pin your versions! If you update and the nodes get out of sync, it implodes.

# apk add 'kubelet=~1.30' # apk add 'kubeadm=~1.30' # apk add 'kubectl=~1.30'

Note: In the future you will manually have to add a newer version the same way to upgrade.

Your blank node is now ready! If it's the first, you'll want to make a control node.

3. Setup the Control Plane (New Cluster!) 🦾

Run this command to start the cluster and then apply a network.

#do not change subnet
kubeadm init --pod-network-cidr=10.244.0.0/16 --node-name=$(hostname)
mkdir ~/.kube
ln -s /etc/kubernetes/admin.conf /root/.kube/config
kubectl apply -f https://raw.githubusercontent.com/flannel-io/flannel/master/Documentation/kube-flannel.yml

You now have a control plane. This also gives you the command to run on our blank nodes to add them to this cluster as workers.

4. Join the cluster. 🐜

Run this to get the join command from the control plane which you would then run on your new worker.

kubeadm token create --print-join-command 

Bonus 💰

Setup NFS Mounts on K8s

This can be shared NFS storage to allow for auto persistent claim fulfilment. You'll need your IP updated and export information.

helm repo add nfs-subdir-external-provisioner https://kubernetes-sigs.github.io/nfs-subdir-external-provisioner/
helm install nfs-subdir-external-provisioner nfs-subdir-external-provisioner/nfs-subdir-external-provisioner \
    --set nfs.server=192.168.1.31 \
    --set nfs.path=/exports/cluster00

Now set the default storage class for the cluster.

kubectl get storageclass
kubectl patch storageclass nfs-client -p '{"metadata": {"annotations":{"storageclass.kubernetes.io/is-default-class":"true"}}}'

Check on System 👀

Check on your system.

kubectl get nodes
kubectl get all
kubectl events -A

Cloud Bonus 🌦️

A description of the cloud init version is avalable at K8s_with_cloud-init