Setting Up a bridge: Difference between revisions
(Created page with ' vi /etc/network/interfaces auto br0 iface br0 inet static pre-up brctl addbr br0 pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables pre-up ec...') |
No edit summary |
||
| Line 1: | Line 1: | ||
apk add bridge-utils | |||
vi /etc/network/interfaces | vi /etc/network/interfaces | ||
auto br0 | auto br0 | ||
iface br0 inet static | iface br0 inet static | ||
pre-up brctl addbr br0 | |||
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables | |||
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables | |||
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-ip6tables | |||
address 192.168.0.253 | |||
netmask 255.255.255.0 | |||
gateway 192.168.0.254 | |||
post-down brctl delbr br0 | |||
auto eth0 | auto eth0 | ||
iface eth0 inet manual | iface eth0 inet manual | ||
up ip link set $IFACE up | |||
up brctl addif br0 $IFACE | |||
down brctl delif br0 $IFACE || true | |||
down ip link set $IFACE down | |||
auto eth1 | auto eth1 | ||
iface eth1 inet manual | iface eth1 inet manual | ||
up ip link set $IFACE up | |||
up brctl addif br0 $IFACE | |||
down brctl delif br0 $IFACE || true | |||
down ip link set $IFACE down | |||
... | |||
... | |||
That way you create br0 with: ifup br0, and you can add/remove | That way you create br0 with: ifup br0, and you can add/remove | ||
individual interfaces to the bridge with ifup eth0, ifdown eth0. | individual interfaces to the bridge with ifup eth0, ifdown eth0. | ||
Revision as of 12:04, 2 April 2010
apk add bridge-utils
vi /etc/network/interfaces
auto br0 iface br0 inet static pre-up brctl addbr br0 pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-ip6tables address 192.168.0.253 netmask 255.255.255.0 gateway 192.168.0.254 post-down brctl delbr br0 auto eth0 iface eth0 inet manual up ip link set $IFACE up up brctl addif br0 $IFACE down brctl delif br0 $IFACE || true down ip link set $IFACE down auto eth1 iface eth1 inet manual up ip link set $IFACE up up brctl addif br0 $IFACE down brctl delif br0 $IFACE || true down ip link set $IFACE down ...
That way you create br0 with: ifup br0, and you can add/remove individual interfaces to the bridge with ifup eth0, ifdown eth0.