Alpine Package Keeper: Difference between revisions
| Line 210: | Line 210: | ||
{{Note|Remember that when you reboot your machine, remote repositories will not be available until after the networking is started. This means packages newer than your local boot media will likely not be installed after a reboot. To make an "upgrade" persist over a reboot, use a [[#Local Cache|local cache]].}} | {{Note|Remember that when you reboot your machine, remote repositories will not be available until after the networking is started. This means packages newer than your local boot media will likely not be installed after a reboot. To make an "upgrade" persist over a reboot, use a [[#Local Cache|local cache]].}} | ||
To | To upgrade an running system to a newer release, refer the release notes and [[Upgrading_Alpine]]. | ||
= Search for Packages = | = Search for Packages = | ||
Revision as of 18:13, 16 May 2020
Because Alpine Linux is designed to run from RAM, package management involves two phases:
- Installing / Upgrading / Deleting packages on a running system.
- Restoring a system to a previously configured state (e.g. after reboot), including all previously installed packages and locally modified configuration files. (RAM-Based Installs Only)
apk is the tool used to install, upgrade, or delete software on a running system.
lbu is the tool used to capture the data necessary to restore a system to a previously configured state.
This page documents the apk tool - See the Alpine Local Backup page for the lbu tool.
Overview
The apk tool supports the following operations:
| add | Add new packages or upgrade packages to the running system |
| del | Delete packages from the running system |
| fix | Attempt to repair or upgrade an installed package |
| update | Update the index of available packages |
| info | Prints information about installed or available packages |
| search | Search for packages or descriptions with wildcard patterns |
| upgrade | Upgrade the currently installed packages |
| cache | Maintenance operations for locally cached package repository |
| version | Compare version differences between installed and available packages |
| index | create a repository index from a list of packages |
| fetch | download (but not install) packages |
| audit | List changes to the file system from pristine package install state |
| verify | Verify a package signature |
| dot | Create a graphviz graph description for a given package |
| policy | Display the repository that updates a given package, plus repositories that also offer the package |
| stats | Display statistics, including number of packages installed and available, number of directories and files, etc. |
| manifest | Display checksums for files contained in a given package |
Packages and Repositories
Software packages for Alpine Linux are digitally signed tar.gz archives containing programs, configuration files, and dependency metadata. They have the extension .apk, and are often called "a-packs".
The packages are stored in one or more repositories. A repository is simply a directory with a collection of *.apk files. The directory must include a special index file, named APKINDEX.tar.gz to be considered a repository.
The apk utility can install packages from multiple repositories. The list of repositories to check is stored in /etc/apk/repositories, one repository per line. If you booted from a USB stick (/media/sda1) or CD-ROM (/media/cdrom), your repository file probably looks something like this:
Contents of /etc/apk/repositories
In addition to local repositories, the apk utility uses busybox wget to fetch packages using http:, https: or ftp: protocols. The following is a valid repository file:
Contents of /etc/apk/repositories
Repository pinning
You can specify additional "tagged" repositories in /etc/apk/repositories:
Contents of /etc/apk/repositories
After which you can "pin" dependencies to these tags using:
apk add stableapp newapp@edge bleedingapp@testing
Apk will now by default only use the untagged repositories, but adding a tag to specific package:
1. will prefer the repository with that tag for the named package, even if a later version of the package is available in another repository
2. allows pulling in dependencies for the tagged package from the tagged repository (though it prefers to use untagged repositories to satisfy dependencies if possible)
Commandline repository options
By default, the apk utility will use the system repositories for all operations. This behavior can be overridden by the following options:
| --repositories-file REPOFILE | Override the system repositories by specifying a repositories file. |
| -X|--repository REPO | Specify a supplemental repository that will be used in addition to the system repositories. This option can be provided multiple times. |
Update the Package list
Remote repositories change as packages are added and upgraded. To get the latest list of available packages, use the update command. The command downloads the APKINDEX.tar.gz from each repository and stores it in the local cache, typically /var/cache/apk/, /var/lib/apk/ or /etc/apk/cache/.
apk update
Adding the --update-cache, or for short -U switch to another apk command, as in apk --update-cache upgrade or apk -U add ..., the command has the same effect as first running apk update before the other apk command.
Add a Package
Use add to install packages from a repository. Any necessary dependencies are also installed. If you have multiple repositories, the add command installs the newest package.
apk add openssh apk add openssh openntp vim
If you only have the main repository enabled in your configuration, apk will not include packages from the other repositories. To install a package from the edge/testing repository without changing your repository configuration file, use the command below. This will tell apk to use that particular repository.
apk add cherokee --update-cache --repository http://dl-3.alpinelinux.org/alpine/edge/testing/ --allow-untrusted
Add a local Package
To install a locally available apk package, for example if this device has no internet access but you can upload apk packages directly to it, use the --allow-untrusted flag:
apk add --allow-untrusted /path/to/file.apk
Note that multiple packages can be given. When installing a local package, all dependencies should also be specified. For example:
apk add --allow-untrusted /var/tig-2.2-r0.apk /var/git-2.11.1-20.apk
Remove a Package
Use del to remove a package (and dependencies that are no longer needed.)
apk del openssh apk del openssh openntp vim
Upgrade a Running System
To get the latest security upgrades and bugfixes available for all the packages of a running system, first update the list of available packages and then upgrade the installed packages:
apk update apk upgrade
Or, combining the same into one single command:
apk -U upgrade
Here is an example, showing the procedure on a system that has several additional repositories pinned:
# apk update fetch http://dl-3.alpinelinux.org/alpine/v3.6/main/x86_64/APKINDEX.tar.gz fetch http://dl-3.alpinelinux.org/alpine/v3.6/community/x86_64/APKINDEX.tar.gz fetch http://dl-3.alpinelinux.org/alpine/edge/main/x86_64/APKINDEX.tar.gz fetch http://dl-3.alpinelinux.org/alpine/edge/community/x86_64/APKINDEX.tar.gz fetch http://dl-3.alpinelinux.org/alpine/edge/testing/x86_64/APKINDEX.tar.gz v3.6.2-191-gf98d79930f [1] v3.6.2-190-ga5d68c47df [2] v3.6.0-4618-g0bf77c9821 [3] v3.6.0-4605-g85ed51dd83 [4] v3.6.0-4624-g11f1b9c8ab [5] OK: 20118 distinct packages available # apk upgrade (1/2) Upgrading extra-cmake-modules@testing (5.38.0-r0 -> 5.39.0-r0) (2/2) Upgrading extra-cmake-modules-doc@testing (5.38.0-r0 -> 5.39.0-r0) Executing mdocml-apropos-1.14.1-r0.trigger OK: 2635 MiB in 803 packages
To upgrade only specific packages, use the -u or --upgrade option of the add command:
apk update apk add --upgrade busybox
To upgrade an running system to a newer release, refer the release notes and Upgrading_Alpine.
Search for Packages
The search command searches the repository Index files for installable packages.
The return format is Package-Version. Omit Version for apk add Package
Examples:
- To list all packages available, along with their descriptions:
apk search -v
- To list all packages are part of the ACF system:
apk search -v 'acf*'
- To list all packages that list NTP as part of their description, use the -d or --description option:
apk search -v --description 'NTP'
Information on Packages
apk info
The info command provides information on the contents of packages, their dependencies, and which files belong to a package.
For a given package, each element can be chosen (for example, -w to show just the webpage information), or all information displayed with the -a command.
Example:
apk info -a zlib
zlib-1.2.5-r1 description: A compression/decompression Library zlib-1.2.5-r1 webpage: http://zlib.net zlib-1.2.5-r1 installed size: 94208 zlib-1.2.5-r1 depends on: libc0.9.32 zlib-1.2.5-r1 is required by: libcrypto1.0-1.0.0-r0 apk-tools-2.0.2-r4 openssh-client-5.4_p1-r2 openssh-5.4_p1-r2 libssl1.0-1.0.0-r0 freeswitch-1.0.6-r6 atop-1.25-r0 zlib-1.2.5-r1 contains: lib/libz.so.1.2.5 lib/libz.so.1 lib/libz.so zlib-1.2.5-r1 triggers:
As shown in the example you can determine
- The description of the package (-d or --description)
- The webpage where the application is hosted (-w or --webpage)
- The size the package will require once installed (in bytes) (-s or --size)
- What packages are required to use this one (depends) (-R or --depends)
- What packages require this one to be installed (required by) (-r or --rdepends)
- The contents of the package, that is, which files it installs (-L or --contents)
- Any triggers this package sets. (-t or --triggers) Listed here are directories that are watched; if a change happens to the directory, then the trigger script is run at the end of the apk add/delete. For example, doing a depmod once after installing all packages that add kernel modules.
apk info --who-owns /sbin/lbu
will display/sbin/lbu is owned by alpine-conf-x.x-rx
Listing installed packages
To list all installed packages, use:
apk info
To list all installed packages in alphabetical order, with a description of each, do:
apk -vv info|sort
apk policy
To display the repository a package was installed from and will be updated from, plus any tagged or enabled repositories where it is also offered, if any, for this architecture - its policy:
apk policy package
For example:
$ apk policy vlc
vlc policy:
2.2.6-r1:
lib/apk/db/installed
http://dl-3.alpinelinux.org/alpine/v3.7/community
3.0.0_rc2-r1:
@edgecommunity http://dl-3.alpinelinux.org/alpine/edge/community
Additional apk Commands
In progress...
Local Cache
Overview
APK can keep a cache of installed packages on a local disk.
In diskless installations, since these packages are available during boot, packages can then be automatically (re-)installed from local media into RAM when booting, without requiring, and even before there is a network connection. The cache can be stored on any writable media, or at the same location as the .apkovl file from the local backup utility lbu.
HDD or sys mode installs don't need an apk cache to maintain their state, it still allows to serve packages over the network, though, e.g. to get installed by other local machines.
Enabling Local Cache
Execute the script setup-apkcache will assist in enabling a local cache. The script creates a symlink named /etc/apk/cache that points to the cache directory.
setup-apkcache
Cache can also be manually enabled by creating a cache dir and then symlink it to /etc/apk/cache:
mkdir -p /var/cache/apk ln -s /var/cache/apk /etc/apk/cache
On a diskless installation, to make the disk where the cache directory is present be automatically mounted at boot create an empty file .boot_repository inside the cache directory.
Cache maintenance
Removing older packages
When newer packages are added to the cache over time, the older versions of the packages default to remain in the cache directory.
The older versions of packages can be removed with the clean command.
apk cache clean
Or to see what is deleted include the verbose switch:
apk -v cache clean
Download missing packages
If you accidentally delete packages from the cache directory, you can make sure they are there with the download command,
apk cache download
Delete and download in one step
You can combine the two steps into one with the sync command - this cleans out old packages and downloads missing packages.
apk cache -v sync
Automatically Cleaning Cache on Reboot
To automatically attempt to validate your cache on reboot, you can add the above command to a /etc/local.d/*.stop file:
Contents of /etc/local.d/cache.stop
Local Cache on tmpfs volumes
In some circumstances it might be useful to have the cache reside on tmpfs, for example if you only wish for it to last as long as the system is up.
NOTE: apk is coded to ignore tmpfs caches, and this is correct behaviour in most instances. Using tmpfs as a package cache can consume large amounts of system memory if you install a lot of packages, possibly resulting in a crashed system. You can limit this by restricting the size of your cache to a small number (128M in the example below).
To do it, you need to create an image inside which your cache can live. We do this by creating an image file, formatting it with ext2, and mounting it at /etc/apk/cache.
apk add e2fsprogs dd if=/dev/zero of=/apkcache.img bs=1M count=128 mkfs.ext2 -F /apkcache.img mkdir -p /etc/apk/cache mount -t ext2 /apkcache.img /etc/apk/cache apk update
As usual, if you want to download currently installed packages into the cache, use apk cache sync.
Advanced APK Usage
Holding a specific package back
In certain cases, you may want to upgrade a system, but keep a specific package at a back level. It is possible to add "sticky" or versioned dependencies. For instance, to hold the asterisk package to the 1.6.2 level or lower:
apk add asterisk=1.6.0.21-r0
or
apk add 'asterisk<1.6.1'
after which a
apk upgrade
will upgrade the entire system, keeping the asterisk package at the 1.6.0 or lower level
To later upgrade to the current version,
apk add 'asterisk>1.6.1'
will ensure that 1.6.1 is the minimum version used.
You can also use "fuzzy" version matching to pin the version to a major/minor release. For example:
apk add 'asterisk=~1.6'
will match any version of asterisk that starts with 1.6 (such as 1.6.0.21-r0 or 1.6.9.31-r9) <ref>Alpine source commit message</ref>
If you desire deterministic, repeatable package installation (such as with containerized environments) via package pinning, it is important to understand your package repo's version retention rules. For example, most Alpine package repos contain an "edge" branch, which may drop package versions that are not deemed fit to make it into a stable branch. This means that pinning to a version on the edge branch may stop working after the package version is revoked from the repo. Always pin to a package version that is intended for your current Alpine Linux version.
Troubleshooting
"apk-tools is old"
apk update, apk upgrade or apk add may report the following:
WARNING: This apk-tools is OLD! Some packages might not function properly
This may happen if you are running Alpine Linux stable version with a certain edge/main, edge/community or testing package(s) also installed. One resolution is to consider upgrading apk-tools. If edge is already tagged in your repositories, then try:
sudo apk add --upgrade apk-tools@edge
- 10 Alpine Linux apk Command Examples Vivek Gite 2019