Setup of DMVPN on Alpine linux

Setting up mGRE tunnel

We start by adding mGRE tunnels to our network configuration.

Contents of /etc/networking/interfaces

... auto gre1 iface gre1 inet static pre-up ip tunnel add $IFACE mode gre key 42 ttl 64 dev br0 || true address 192.168.148.2 netmask 255.255.255.255 post-down ip tunnel del $IFACE || true

Note: In conjunction with IPsec VPNs this allows passing of routing information between connected networks.

Note: A standard GRE tunnel will specify its start and endpoint. In case of the mGRE tunnel we do not assign an endpoint, and we provide it an ip address.

Note: A tunnel key is a 32-bit number is assigned to both ends of the tunnel. A key is added with the add gre tunnel command, and can be modified or deleted with the set gre tunnel command. The tunnel key provides a weak form of security because packets injected into the tunnel by an external party are rejected unless they contain the correct tunnel key value. The key also allows packets to travel through specific tunnels in multi-point networks because the key identifies each end of one tunnel.

Setting up IPSec VPN

To encrypt the traffic going over this tunnel, we will use ipsec. for ipsec we will use strongswan which has the vici plugin, see: The vici plugin provides VICI, the Versatile IKE Configuration Interface. As its name indicates, it provides an interface for external applications to not only configure, but also to control and monitor the IKE daemon charon. for this we also need a modified version of strongswan, provided by fabled.

apk add strongswan

Contents of /etc/swanctl/swanctl.conf

connections { dmvpn { version = 2 pull = no mobike = no dpd_delay = 15 dpd_timeout = 30 fragmentation = yes unique = replace rekey_time = 4h reauth_time = 13h proposals = aes256-sha512-ecp384 local { auth = psk id = spoke1 } remote { auth = psk } children { dmvpn { esp_proposals = aes256-sha512-ecp384 local_ts = dynamic[gre] remote_ts = dynamic[gre] inactivity = 90m rekey_time = 100m mode = transport dpd_action = clear reqid = 1 } } } }

Note: To control the IPSec VPN, NHRP will talk to Strongswan via its vici plugin.

Generate PKI certificates

First, generate a private key, the default generates a 2048 bit RSA key

ipsec pki --gen > caKey.der

Now self-sign a CA certificate using the generated key:

ipsec pki --self --in caKey.der --dn "C=CH, O=strongSwan, CN=strongSwan CA" --ca > caCert.der

Adjust the distinguished name (DN) to your needs, it will be included in all issued certificates.

For each peer, i.e. for all VPN clients and VPN gateways in your network, generate an individual private key and issue a matching certificate using your new CA:

ipsec pki --gen > peerKey.der
ipsec pki --pub --in peerKey.der | ipsec pki --issue --cacert caCert.der --cakey caKey.der \
                                            --dn "C=CH, O=strongSwan, CN=peer" > peerCert.der

The second command extracts the public key and issues a certificate using your CA.

In case end entity certificates have to be revoked, Certificate Revocation Lists (CRLs) may be generated with the ipsec pki --signcrl command:

ipsec pki --signcrl --cacert caCert.der --cakey caKey.der --reason superseded --cert peerCert.der > crl.der

The certificate given with --cacert must be either a CA certificate or a certificate with the crlSign extended key usage (--flag crlSign).

To talk to the vici interface we use Quagga's new NHRP plugin developed by Timo Teras (fabled). We have to use his modified version, as these changes have not yet been upstreamed.

NHRP will automatically create GRE tunnels over IPsec, and we will use BGP to router the traffic over it.