Chroot

This material is work-in-progress ... Do not follow instructions here until this notice is removed. (Last edited by Dubiousjim on 20 Jan 2015.)

"Changing root" or "chrooting" is a method for zooming in on part of your filesystem, so that, for example, /path will refer to what was formerly accessible at /mnt/path. The "root" in the expression "chroot" refers to the root filesystem /, not to the root user. (Though typically you will need root user privileges in order to chroot.)

A common reason for chrooting is to perform maintenance on existing systems where booting and/or logging in no longer works. One has to boot the hardware somehow, such as with an Installation or Rescue CD or USB; then one mounts the broken system and chroots into it and performs the repairs. Common examples are:

• reinstalling the bootloader
• rebuilding the initramfs image
• upgrading or downgrading packages
• resetting a forgotten password

Chrooting can also be used to create and host a separate virtualized installation of the system. This can be useful for:

• Testing and development, with software that's too risky to deploy on a production system.
• Software can be developed, built and tested in a chroot populated only with its expected dependencies.
• Can run legacy software or other software whose supporting libraries or data files can't be installed in the host system.
• Programs can carry open file descriptors (for files, pipelines and network connections) into the chroot, making it unnecessary for working files to be visible inside the chroot directory. This can help separate privileges or design sandboxes. Note that chroot is not a secure way to contain a hostile process with root privileges. See Wikipedia's discussion of some of chroot's limits.

Here are some other resources:

• What's the proper way to prepare chroot to recover a broken Linux installation?
• ArchLinux wiki on "Change Root"
• ArchLinux Wiki on "Reinstalling GRUB"
• Gentoo Wiki on "Chroot from a livecd"
• Ubuntu wiki on "Basic chroot"

Preparation

• All the steps in this guide will have to be performed as root user.

• If you are using chroot to repair an existing Linux system, it will need to be mounted first. If you don't know the location and/or filetype of the disk(s) where it resides, read the output of fdisk -l or lsblk. We will suppose the broken system is at /dev/sdx1 and its filetype is ext3. Create a directory for mounting this disk, and mount it:

mkdir -p $CHROOT
mount -t ext3 /dev/sdx1 $CHROOT

where $CHROOT EXPLAIN. If the system directory is encrypted or in a LVM group or anything like that, we'll leave it to you to figure out what steps to take to prepare it and mount it.

• If there are separate filesystems for other directories (such as /boot, /var, /usr, /home), mount them too:

mount /dev/sdx2 $CHROOT/boot
mount /dev/sdx3 $CHROOT/var
mount /dev/sdx4 $CHROOT/usr

For many repair tasks, you may not need to mount the broken system's /home directory. If you do have /boot on a separate partition, it's essential to have it mounted before working with GRUB, performing a kernel upgrade, or anything of that sort. It's also possible to mount some of these filesystems after you've chrooted, and in some cases mounting {{Path|/boot} in particular after chrooting has worked better with GRUB. If you can, though, it's smarter to mount these beforehand. The reason is that if you do it from inside the chroot, the outside/host environment won't know about the mounted filesystems, so if you forget to umount them before exiting the chroot, the system won't know to umount them when it shuts down, either. That could damage those filesystems.

• The script presented below will take care of generating or remounting other system directories like /dev, /proc, /sys, /tmp and so on.

• The architecture of the host system you're booted into (e.g., if it's a 32bit LiveCD, that's x86) and the system you want to chroot into must match. You can determine what architecture you're booted into using uname -m.

• Before chrooting, be sure any kernel modules you'll need when working inside the chroot have been loaded. For example:

modprobe dm-mod
modprobe dm-crypt

• Set up your network if you'll need it inside the chroot, e.g., to install updated packages. The script presented below will copy the /etc/resolv.conf from the host system, but will prompt before overwriting an existing etc/resolv.conf inside the chroot. If you like, you can generate one from scratch by doing:

echo 'nameserver 8.8.8.8' > $CHROOT/etc/resolv.conf

• If your host system is Alpine or another distribution (like Hardened Gentoo) that uses the grsecurity kernel patches, for some maintenance tasks you'll want to make sure some of the grescurity prohibitions are disabled. For example:

sysctl -w kernel.grsecurity.chroot_deny_chmod=0 # exable suid/sgid
sysctl -w kernel.grsecurity.chroot_deny_mknod=0
sysctl -w kernel.grsecurity.chroot_deny_mount=0
sysctl -p

For more info, see:

• • http://en.wikibooks.org/wiki/Grsecurity
  • http://www.gentoo.org/proj/en/hardened/grsecurity.xml

Performing the chroot

The most reliable way to chroot is to use the following script:

Contents of /root/start-chroot

#!/bin/sh -e user=`whoami` if [ "$user" != "root" ]; then echo "This script needs root access" >&2 exit 1 fi if ! [ -d "$1" ]; then echo "Usage: $0 <chroot directory>" >&2 exit 1 fi if [ x1 = x`sysctl -ne kernel.grsecurity.chroot_deny_chmod` ]; then echo "Warning: can't suid/sgid inside chroot" >&2 fi if [ x1 = x`sysctl -ne kernel.grsecurity.chroot_deny_chroot` ]; then echo "Warning: can't chroot inside chroot" >&2 fi if [ x1 = x`sysctl -ne kernel.grsecurity.chroot_deny_mknod` ]; then echo "Warning: can't mknod inside chroot" >&2 fi if [ x1 = x`sysctl -ne kernel.grsecurity.chroot_deny_mount` ]; then echo "Warning: can't mount inside chroot" >&2 fi cd "$1" shift cp -L /etc/resolv.conf ./etc/ || true mount -t proc proc ./proc mount -t sysfs sys ./sys mount -o bind /dev ./dev # next line is said to be important for pacman's signature check mount -o bind /dev/pts ./dev/pts case $1 in -l) shift;; -l*) one=${1#-l}; shift; set -- -$one "$@";; esac chroot . /bin/sh -l "$@" umount ./dev/pts umount ./dev ./sys ./proc

Copy that script to some location on your system, such as /root/start-chroot, run `chmod +x` on it, and then invoke it as:

/root/start-chroot $CHROOT

, where $CHROOT evaluates to the path you want to chroot into (for example, /mnt.

Comment on Environment variables, extra arguments to start-chroot.

It is certainly possible to perform a chroot by hand, without using this script. For some purposes, you can get away with a simpler procedure than the script follows. But it's hard to catalogue in advance when taking shortcuts will get you in trouble, so it's best to just get in the habit of using this script (or doing the same things it does). As you read around in various wikis (perhaps including this one), you will encounter a variety of instructions for how to chroot by hand. These instructions often differ in small details from each other and are usually not as thorough as the above script.

Inside the chroot

Now that you're inside the chroot, you can perform whatever troubleshooting you need to do:

• resintall GRUB to your disk's MBR
• reset a forgotten password
• perform a kernel upgrade (or downgrade)
• rebuild your initramdisk
• fix your /etc/fstab
• reinstall packages using your package manager
• whatever

If you have multiple terminals open on or connected to the running system, the chroot will only be effective in the terminal that you performed it in.