OpenVCP: Difference between revisions

From Alpine Linux
(Created page with "== What is openvcp? == OpenVCP is a Open-Source VServer Control Panel published under the GNU General Public Licence (GPL). OpenVCP is developed for use with Linux in combinatio...")
 
(replace /etc/init.d with rc-service)
 
(11 intermediate revisions by 5 users not shown)
Line 1: Line 1:
== What is openvcp? ==
[http://www.openvcp.org/ OpenVCP] is a Open-Source VServer Control Panel published under the GNU General Public Licence (GPL). OpenVCP is developed for use with Linux in combination with Linux-Vserver (  http://www.linux-vserver.org ). It provides a web-based interface to manage a whole farm of VServer hosts, build guests, control the guests, account traffic and much more.


OpenVCP is a Open-Source VServer Control Panel published under the GNU General Public Licence (GPL). OpenVCP is developed for use with Linux in combination with Linux-Vserver (  http://www.linux-vserver.org ). It provides a web-based interface to manage a whole farm of VServer hosts, build guests, control the guests, account traffic and much more.
== Install openvcp daemon ==


== Set up openvcp on Alpine Linux ==
{{Cmd|apk add util-vserver util-vserver-dev php-tls sqlite sqlite-dev libxml2 libxml2-dev libpcap libpcap-dev rsync libtool alpine-sdk}}


This document will be a quick c/p guide to setup openvcp on Alpine linux. What we will setup is the following:
Download
 
{{Cmd|cd /tmp/
wget http://files.openvcp.org/openvcpd-0.5rc3.tar.gz}}
 
Unpack and delete tar file
 
{{Cmd|tar zxvf openvcpd-0.5rc3.tar.gz}}
 
{{Cmd|cd openvcpd-0.5rc3/}}
 
Configure Compile & install the daemon
 
{{Cmd|<nowiki>./configure --prefix=/usr --sysconfdir=/etc
make
make install</nowiki>}}
 
Create directories


* Lighttpd with PHP
{{Cmd|mkdir -p /vservers/backups
* Mysql
mkdir -p /vservers/userbackups
* openvcp
mkdir -p /vservers/images}}


== Install lighttpd, PHP and MySql ==
Edit the config file


apk add lighttpd mysql mysql-client php-mysql php-mysqli php php-xml php-gettext php-sockets php-gd
Change "IP" to your own ip and "Ifaces" to the interface you want to measure traffic on


== Configuring Lighttpd ==
{{Cmd|nano /etc/openvcpd.conf}}


'''Edit lighttpd.conf'''
Copy some images to your image directory usually "/vservers/images" (e.g.:  http://www.openvcp.org/wiki/Downloads. ( These Images are just folders that contain a Linux system )


nano +46 /etc/lighttpd/lighttpd.conf
Start the daemon


Uncomment lines:
{{Cmd|openvcpd}}


uncoment    include "mod_fastcgi.conf", save and exit
== Install openvcp web access with Lighttpd ==


{{:Setting Up Lighttpd With FastCGI}}


'''Starting http service and adding to boot'''
Install extra packages


  /etc/init.d/lighttpd start && rc-update add lighttpd default
{{Cmd|apk add mysql mysql-client php-mysql php-mysqli php-gettext php-sockets}}


== Configuring MySql ==
== Configuring MySql ==


  /usr/bin/mysql_install_db --user=mysql
  /usr/bin/mysql_install_db --user=mysql
  /etc/init.d/mysql start && rc-update add mysql default
  rc-service mysql start && rc-update add mysql default
  /usr/bin/mysqladmin -u root password 'password'
  /usr/bin/mysqladmin -u root password 'password'


Line 47: Line 65:
  EXIT
  EXIT


== Installing openvcp ==
== Installing openvcp web access ==
 
'''Install openvcp'''


Make webapps folder
Make webapps folder
Line 67: Line 83:
Change Folder Persmissions
Change Folder Persmissions


  chmod -R 777 /usr/share/webapps/openvcp/core/cache
chmod -R 777 /usr/share/webapps/openvcp/core/cache


Make symlinks to openvcp
Make symlinks to openvcp
Line 73: Line 89:
  ln -s /usr/share/webapps/openvcp/ /var/www/localhost/htdocs/openvcp
  ln -s /usr/share/webapps/openvcp/ /var/www/localhost/htdocs/openvcp


== Configuring openvcp ==
== Configuring openvcp web access ==


Browse to: http://WEBSERVER_IP_ADDRESS/openvcp/ and Install openvcp completing the information as appropriate from the web browser.
Browse to: <nowiki>http://WEBSERVER_IP_ADDRESS/openvcp/</nowiki> and Install openvcp completing the information as appropriate from the web browser.


Openvcp Installation steps:
Openvcp Installation steps:
Line 100: Line 116:
Congratulations, you installed openvcp!
Congratulations, you installed openvcp!


You have openvcp web access system working, to access go to <nowiki>http://WEBSERVER_IP_ADDRESS/openvcp/</nowiki> user: ''Admin'' password: ''test''


You have openvcp web access system working, to access go to http://WEBSERVER_IP_ADDRESS/openvcp/ user: ''Admin'' password: ''test''
[[Category:Server]]
 
[[Category:Virtualization]]
 
== Licence ==
 
'''Licence:'''
 
openvcp is published under the GNU General Public Licence (GPL).

Latest revision as of 10:38, 17 November 2023

OpenVCP is a Open-Source VServer Control Panel published under the GNU General Public Licence (GPL). OpenVCP is developed for use with Linux in combination with Linux-Vserver ( http://www.linux-vserver.org ). It provides a web-based interface to manage a whole farm of VServer hosts, build guests, control the guests, account traffic and much more.

Install openvcp daemon

apk add util-vserver util-vserver-dev php-tls sqlite sqlite-dev libxml2 libxml2-dev libpcap libpcap-dev rsync libtool alpine-sdk

Download

cd /tmp/ wget http://files.openvcp.org/openvcpd-0.5rc3.tar.gz

Unpack and delete tar file

tar zxvf openvcpd-0.5rc3.tar.gz

cd openvcpd-0.5rc3/

Configure Compile & install the daemon

./configure --prefix=/usr --sysconfdir=/etc make make install

Create directories

mkdir -p /vservers/backups mkdir -p /vservers/userbackups mkdir -p /vservers/images

Edit the config file

Change "IP" to your own ip and "Ifaces" to the interface you want to measure traffic on

nano /etc/openvcpd.conf

Copy some images to your image directory usually "/vservers/images" (e.g.: http://www.openvcp.org/wiki/Downloads. ( These Images are just folders that contain a Linux system )

Start the daemon

openvcpd

Install openvcp web access with Lighttpd

Basic Installation

For installing the additional packages first activate community packages and update the package index

Install the required packages:

# apk add lighttpd php82 fcgi php82-cgi

Configure Lighttpd

Edit lighttpd.conf (/etc/lighttpd/lighttpd.conf) and uncomment the line:

Contents of /etc/lighttpd/lighttpd.conf

... include "mod_fastcgi.conf" ...

Edit mod_fastcgi.conf (/etc/lighttpd/mod_fastcgi.conf), find and change /usr/bin/php-cgi to /usr/bin/php-cgi82.

Contents of /etc/lighttpd/mod_fastcgi.conf

... "bin-path" => "/usr/bin/php-cgi82" # php-cgi ...

Start lighttpd service and add it to default runlevel

# rc-service lighttpd start # rc-update add lighttpd default

Install extra packages

apk add mysql mysql-client php-mysql php-mysqli php-gettext php-sockets

Configuring MySql

/usr/bin/mysql_install_db --user=mysql
rc-service mysql start && rc-update add mysql default
/usr/bin/mysqladmin -u root password 'password'

Create the openvcp database

Note: you can import the database from command line or from the openvcp web page later. 

mysql -u root -p

CREATE DATABASE openvcp;
GRANT ALL PRIVILEGES ON openvcp.* TO "root";
FLUSH PRIVILEGES;
EXIT

Installing openvcp web access

Make webapps folder 

mkdir /usr/share/webapps/ -p

Download 

cd /usr/share/webapps/
wget http://files.openvcp.org/openvcp-web-0.5rc3.tar.gz

Unpack and delete tar file 

tar zxvf openvcp-web-0.5rc3.tar.gz
rm openvcp-web-0.5rc3.tar.gz

Change Folder Persmissions 

chmod -R 777 /usr/share/webapps/openvcp/core/cache

Make symlinks to openvcp 

ln -s /usr/share/webapps/openvcp/ /var/www/localhost/htdocs/openvcp

Configuring openvcp web access

Browse to: http://WEBSERVER_IP_ADDRESS/openvcp/ and Install openvcp completing the information as appropriate from the web browser.

Openvcp Installation steps:

Welcome to the setup of OpenVCP

MySQL

  • host: localhost
  • dn: openvcp
  • user: root
  • Password: password
  • prefix: openvcp_

Other

  • location: /openvcp

relative to webroot

  • default locale: en_US
  • admin email: yourname@email.com

After set all click on "setup" to finish the installation.

Congratulations, you installed openvcp!

You have openvcp web access system working, to access go to http://WEBSERVER_IP_ADDRESS/openvcp/ user: Admin password: test

Retrieved from "https://wiki.alpinelinux.org/w/index.php?title=OpenVCP&oldid=25737"