Release Notes for Alpine 3.21.0: Difference between revisions

From Alpine Linux
(→‎ISC DHCP: dracut-modules-network)
 
(64 intermediate revisions by 8 users not shown)
Line 5: Line 5:
== Important changes ==
== Important changes ==


=== OpenSSH requires restart ===
=== OpenSSH service requires restart ===


{{Note|TODO: Remove this section if https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/68589 gets merged before 3.21 is released }}
From the <code>9.8_p1</code> release, and on, of {{pkg|openssh}}, {{pkg|openssh-server}} is split into two binaries (<code>/usr/lib/ssh/sshd-session</code> and <code>/usr/sbin/sshd</code>). Due to this change, it will not be possible to <code>ssh</code> into a system that has upgraded from a release prior to <code>9.8_p1</code> to this release or later, without restarting the <code>sshd</code> service.


You need to restart your sshd service!
We have previously brought attention to this - https://alpinelinux.org/posts/2024-07-02-openssh-upgrade-edge.html


Since the <code>9.8_p1</code> release, openssh-server is now split into two binaries, sshd and sshd-session. With this change sshd needs to be restarted to be able to accept new connections.
Managing services has always been out-of-scope for {{pkg|apk-tools}}, but this one time we will '''make an exception''' when the following conditions are met:
# You have both the {{pkg|openssh-server}} and {{pkg|openssh-server-common-openrc}} packages installed at a version lower than <code>9.8_p1</code>
# The <code>sshd</code> service is started


Since managing services has always been out-of-scope for apk, we will NOT do the following for you:
We will then, post {{pkg|openssh-server}} upgrade, have a <code>post-upgrade</code> script that will:
# Print a message on what is about to happen and why
# Restart the <code>sshd</code> service
# If the command to restart the service fails for any reason, a warning message will be printed and an error code returned to <code>apk</code>, to be noticed by the end of the package upgrades (this will not interrupt the upgrade process).


<code>
We have decided to do this in order to help keep you from getting locked out of your system(s) and be able to fix any issues with the upgrade.
rc-service --ifstarted sshd restart
 
</code>
See also:
* https://bugzilla.mindrot.org/show_bug.cgi?id=3706
* https://git.alpinelinux.org/aports/commit/?id=6adff08ae09961d4eea66b55a8cca14d3941fb53


=== New loongarch64 architecture ===
=== New loongarch64 architecture ===
Line 27: Line 34:
=== Preparations for /usr-merge ===
=== Preparations for /usr-merge ===


We plan for the next Alpine Linux, version 3.22, to contain the /usr-merge.
Plans for /usr-merge are underway and we should be able to finalize it in Alpine Linux, version 3.22.


A lot of preperations went into this release to ensure that the merge happens as smoothly as possible.
Much preparation has gone into this release to ensure that the merge happens as smoothly as possible. That included moving the location of some binaries and many libraries from <code>/bin</code>, <code>/sbin</code>, and <code>/lib</code> to their counterparts in <code>/usr</code>. As part of the merge, <code>/usr</code> will be mounted from the initramfs to make sure everybody has all necessary binaries in place.


{{Note|TODO: replace with actual blog post}}
'''Users with installations where <code>/</code> and <code>/usr</code> are on separate filesystems (partitions, volumes, disk drives or other) should proceed with care and report any issues.'''  They should also ensure that an entry <code>/usr</code> is added to <code>/etc/fstab</code> before upgrading, and all modules required to mount <code>/usr</code> from the initramfs are added to mkinitfs configuration. New/fresh installations of v3.21 will work out of the box without modification. Please note that <code>/</code> on separate filesystem than <code>/usr</code> is not officially supported.


For more information, the timeline and the effects, read the blog post: https://gitlab.alpinelinux.org/alpine/infra/alpine-mksite/-/merge_requests/88/diffs
If you have one of these setups, and have doubts about the configuration, you can open an [https://gitlab.alpinelinux.org/alpine/aports/-/issues/new issue] and ping <code>@pabloyoyoista</code>. We will also publish a blog post soon with further information on the timeline and progress of the merge, as well as how the changes may affect users.


== Significant changes ==
== Significant changes ==
Line 39: Line 46:
=== Jellyfin ===
=== Jellyfin ===


Jellyfin now uses the recommended fork of ffmpeg called {{pkg|jellyfin-ffmpeg}} by default. If you want to change that, take a look at the <code>ffmpegpath</code> variable in <code>/etc/conf.d/jellyfin</code>. ([https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/69924 !69924])
Jellyfin now uses the recommended fork of ffmpeg called {{pkg|jellyfin-ffmpeg}} by default. If you want to change the default, take a look at the <code>ffmpegpath</code> variable in <code>/etc/conf.d/jellyfin</code>. ({{MR|69924}})


Jellyfin was disabled for ARM architectures (<code>aarch64</code> and <code>armv7</code>) and is only available for <code>x86_64</code>. The relevant issue is: https://gitlab.alpinelinux.org/alpine/aports/-/issues/16613
Jellyfin was disabled for ARM architectures (<code>aarch64</code> and <code>armv7</code>) and is only available for <code>x86_64</code>. ({{Issue|16613}})


=== Bats ===
=== Bats ===


"main/bats" was renamed to "main/bats-core". Now there is a meta package "community/bats" which contains:
<code>main/bats</code> was renamed to <code>main/bats-core</code>. There is now a meta package <code>community/bats</code> which contains:
 
* {{pkg|bats-core}}
* {{pkg|bats-file}}
* {{pkg|bats-support}}
* {{pkg|bats-assert}}
 
=== Xen 4.19 ===
 
''qemu-traditional'' and ''stubdom'' are removed from the build in this release, see https://git.alpinelinux.org/aports/commit/?id=24217a24da3924039b000eb17c04bf3f01bf1f12
 
There is still the {{pkg|xen-qemu}} package, but the regular {{pkg|qemu}} aport [https://git.alpinelinux.org/aports/commit/?id=a9249e2e0de827e88d84c01f9731aeebd248be13 is now built with Xen support], so a {{pkg|qemu-system-*}} package can be used instead.
 
You can choose to use it in your ''xl.cfg(1)'' like so:
<pre>
device_model_override = "/usr/bin/qemu-system-x86_64"
device_model_version = "qemu-xen"
</pre>
 
=== uutils-coreutils ===
 
{{pkg|uutils-coreutils}} is repackaged as a sub-package to {{pkg|uutils}} in such a way as to be a drop-in replacement for GNU {{pkg|coreutils}}.
 
If you have both {{pkg|uutils-coreutils}} and {{pkg|coreutils}} installed, the latter will be '''purged''' and its symlinks replaced with ones pointing to the <code>/usr/bin/uutils</code> binary. The <code>/usr/bin/uutils-*</code> symlinks, previously provided by {{pkg|uutils-coreutils}}, no longer exist.
 
If you prefer to use GNU {{pkg|coreutils}}, remove the {{pkg|uutils-coreutils}} package before upgrading, and then add the {{pkg|uutils}} package, containing the <code>/usr/bin/uutils</code> binary.


* bats-core
A few parts of the {{pkg|uutils}} aport are also split into {{pkg|uutils-*}} subpackages, to avoid conflicts or other issues.
* bats-file
 
* bats-support
=== linux-firmware ===
* bats-assert
 
{{pkg|linux-firmware}} is now compressed with ZSTD compression. If you run a custom built Linux kernel, you need to ensure that <code>CONFIG_FW_LOADER_COMPRESS_ZSTD=y</code> is set in your configuration.


== Note-worthy updates ==
== Note-worthy updates ==


* GCC 14.2.0
As always, a lot of packages were upgraded. Make sure to read the indivdual release notes of the projects you use.
 
* Linux 6.12
* busybox 1.37
* GCC 14.2
* LLVM 19
* LLVM 19
* Go 1.23.3
* Go 1.23
* Rust 1.82
* Rust 1.83
* GNOME 47.1
* PHP 8.4
* KDE Plasma 6.2.3
* GNOME 47
* LXQt 2.1.0
* KDE Plasma 6.2
* LXQt 2.1
* Qt 6.8
* wlroots 0.18


=== GCC 14 ===
=== GCC 14 ===


GCC was upgraded to 14.2.0 and as a result all packages in Alpine 3.21 are compiled with GCC 14.2.0.
The Gnu Compiler Collection was upgraded to 14.2.0 and as a result, all packages built with {{pkg|gcc}} in Alpine 3.21 are compiled with GCC 14.2.0.


Make sure to read all changes: https://gcc.gnu.org/gcc-14/changes.html
Make sure to read all changes: https://gcc.gnu.org/gcc-14/changes.html


=== LXQt 2.0 ===
=== LXQt 2.1 ===


LXQt has been updated to release 2.0.
LXQt has been updated to release 2.1.0  
* It now uses Qt6
* It now uses Qt6
* Many parts of LXQt are now wayland ready¹, but wayland ports of the following are pending: {{pkg|screengrab}}, {{pkg|lxqt-globalkeys}}, LXQt Panel's task-bar² and keyboard indicator, some input settings, and settings of monitor, power button, and screen locker.
* Many parts of LXQt are now Wayland ready¹, but Wayland ports of the following are pending: {{pkg|screengrab}}, {{pkg|lxqt-globalkeys}}, and keyboard indicator, some input settings, as well as settings for  monitor, power button, and screen locker.
* LXQt Panel has a new default application menu called Fancy Menu.
* LXQt Panel has a new default application menu called Fancy Menu.
¹ [https://github.com/lxqt/lxqt-wayland-session lxqt-wayland-session] has not been released or packaged yet, but most folks wanting to test on wayland will want to use it.<br>
¹ [https://github.com/lxqt/lxqt-wayland-session lxqt-wayland-session] has not been packaged yet, but most folks wanting to test on Wayland will want to use it.
² Most folks testing LXQt on wayland are using {{pkg|waybar}} temporarily until the task-bar is ported.
 
=== Linux 6.12 ===
 
Alpine 3.21.0 ships Linux 6.12.1 in the {{pkg|linux-lts}} package.


=== PostgreSQL 17 ===
=== PostgreSQL 17 ===
Line 83: Line 126:
=== LLVM 19 ===
=== LLVM 19 ===


We packaged LLVM 19 in our repositories. Coming to total of 5 supported LLVM versions: {{pkg|llvm19}}, {{pkg|llvm18}}, {{pkg|llvm17}}, {{pkg|llvm16}}, {{pkg|llvm15}}.
We packaged LLVM 19 in our repositories. A total of 5 LLVM versions are supported: {{pkg|llvm19}}, {{pkg|llvm18}}, {{pkg|llvm17}}, {{pkg|llvm16}}, {{pkg|llvm15}}.
 
=== GNOME 47 ===
 
{{pkg|gnome-software}} has been held back to version 45, after several regressions in the apk plugin on update. See {{issue|16637}} for more details.


== Significant removals ==
== Significant removals ==
=== Disabled packages due to FTBS ===
The following packages are temporarily disabled because they failed to build. We will try to restore them as soon as possible.
* {{pkg|hplip}} ({{Issue|16685}})
* {{pkg|imageflow}} ({{Issue|16679}})
* {{pkg|kdevelop}} ({{MR|75839}})
* {{pkg|postgresql-citus}} ({{Issue|16580}})
* {{pkg|uvicorn}} ({{Issue|16646}})
* {{pkg|vulkan-validation-layers}} ({{Issue|16686}})


=== ISC DHCP ===
=== ISC DHCP ===


{{Note|TODO: Write something cool if https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/70974 (or alternative) is merged }}
If you are still running an ISC DHCP server, you are advised to migrate to a maintained alternative '''before''' upgrading to the 3.21 release.
 
ISC DHCP has been EoL since 2022. They have a guide for migrating to {{pkg|kea}} here: https://www.isc.org/dhcp_migration/
 
Up to, and including, the 3.20 version of Alpine, the {{pkg|dhcp|branch=v3.20}} aport has the subpackage {{pkg|keama|branch=v3.20}} that is a tool for helping with migration from ISC DHCP configuration to ISC Kea configuration.
 
Alternative DHCP servers packaged in Alpine include:
* {{pkg|kea}}
* {{pkg|freeradius-dhcp}}
* {{pkg|dnsmasq}}
* udhcpd - packaged in {{pkg|busybox-extras}}
 
==== dracut-modules-network network-legacy removal ====
 
As a consequence of the above, the <code>network-legacy</code> module has been removed from {{pkg|dracut-modules-network}}, as it had a depedency on the {{pkg|dhclient}} sub-package of the ISC DHCP aport.


=== Gogs ===
=== Gogs ===


<code>gogs</code> was removed due to multiple high-severity vulnerabilities which are open within a year. The developers of Gogs were contacted multiple times by the Forgejo team, but got no response. Therefore we removed Gogs from our repositories. ([https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/75304 !75304])
<code>gogs</code> was removed due to multiple high-severity vulnerabilities for which issues have remained open for a year. The developers of Gogs were contacted multiple times by the Forgejo team but unfortunately received no response. Therefore we have removed Gogs from our repositories. ({{MR|75304}})


Please consider migrating to {{pkg|forgejo|branch=edge|arch=}} or {{pkg|gitea|branch=edge|arch=}}. Both forks are available in our community repo, like gogs was.
Please consider migrating to {{pkg|forgejo|branch=edge|arch=}} or {{pkg|gitea|branch=edge|arch=}}. Both forks are available in our community repo.


The Gitea fork of Gogs was created in 2016 by contributors who were annoyed by the single-maintainer management model of Gogs. Forgejo is a fork of Gitea, which was created because the for-profit company Gitea Ltd took over the maintainership, see also https://forgejo.org/compare-to-gitea/.
The Gitea fork of Gogs was created in 2016 by contributors who were frustrated with the single-maintainer management model of Gogs. Forgejo is a fork of Gitea which was created as a result of the for-profit company Gitea Ltd taking over maintainership (see also https://forgejo.org/compare-to-gitea/).


=== neofetch ===
=== neofetch ===


The upstream repository was archived in April, therefore is unmaintained and we removed it from our repositories. {{pkg|fastfetch}} provides similar functionality.
The upstream repository was archived in April and became unmaintained, therefore we have removed it from our repositories. {{pkg|fastfetch}} provides similar functionality.
 
=== .NET 6 ===
 
.NET 6 reached EOL in 12 November 2024 (see https://devblogs.microsoft.com/dotnet/dotnet-6-end-of-support/) and the following packages have been moved to the testing repository ({{MR|73655}}):
* {{pkg|dotnet6-build|branch=edge|arch=}}
* {{pkg|dotnet6-runtime|branch=edge|arch=}}
* {{pkg|dotnet6-stage0|branch=edge|arch=}}
* {{pkg|lidarr|branch=edge|arch=}}
* {{pkg|prowlarr|branch=edge|arch=}}
* {{pkg|radarr|branch=edge|arch=}}
* {{pkg|sonarr|branch=edge|arch=}}
 
[[Category:News]]

Latest revision as of 18:00, 7 December 2024

As always, make sure to read Upgrading Alpine to a new major release when upgrading to a new release.

If you experience any issues with the upgrade, please let us know and file an issue in our repositories.

Important changes

OpenSSH service requires restart

From the 9.8_p1 release, and on, of openssh, openssh-server is split into two binaries (/usr/lib/ssh/sshd-session and /usr/sbin/sshd). Due to this change, it will not be possible to ssh into a system that has upgraded from a release prior to 9.8_p1 to this release or later, without restarting the sshd service.

We have previously brought attention to this - https://alpinelinux.org/posts/2024-07-02-openssh-upgrade-edge.html

Managing services has always been out-of-scope for apk-tools, but this one time we will make an exception when the following conditions are met:

  1. You have both the openssh-server and openssh-server-common-openrc packages installed at a version lower than 9.8_p1
  2. The sshd service is started

We will then, post openssh-server upgrade, have a post-upgrade script that will:

  1. Print a message on what is about to happen and why
  2. Restart the sshd service
  3. If the command to restart the service fails for any reason, a warning message will be printed and an error code returned to apk, to be noticed by the end of the package upgrades (this will not interrupt the upgrade process).

We have decided to do this in order to help keep you from getting locked out of your system(s) and be able to fix any issues with the upgrade.

See also:

New loongarch64 architecture

Alpine 3.21 is the first release which is available for loongarch64.

Thanks to the support of the team of Loongson dedicated to supporting Alpine Linux and many other contributors.

Preparations for /usr-merge

Plans for /usr-merge are underway and we should be able to finalize it in Alpine Linux, version 3.22.

Much preparation has gone into this release to ensure that the merge happens as smoothly as possible. That included moving the location of some binaries and many libraries from /bin, /sbin, and /lib to their counterparts in /usr. As part of the merge, /usr will be mounted from the initramfs to make sure everybody has all necessary binaries in place.

Users with installations where / and /usr are on separate filesystems (partitions, volumes, disk drives or other) should proceed with care and report any issues. They should also ensure that an entry /usr is added to /etc/fstab before upgrading, and all modules required to mount /usr from the initramfs are added to mkinitfs configuration. New/fresh installations of v3.21 will work out of the box without modification. Please note that / on separate filesystem than /usr is not officially supported.

If you have one of these setups, and have doubts about the configuration, you can open an issue and ping @pabloyoyoista. We will also publish a blog post soon with further information on the timeline and progress of the merge, as well as how the changes may affect users.

Significant changes

Jellyfin

Jellyfin now uses the recommended fork of ffmpeg called jellyfin-ffmpeg by default. If you want to change the default, take a look at the ffmpegpath variable in /etc/conf.d/jellyfin. (!69924)

Jellyfin was disabled for ARM architectures (aarch64 and armv7) and is only available for x86_64. (#16613)

Bats

main/bats was renamed to main/bats-core. There is now a meta package community/bats which contains:

Xen 4.19

qemu-traditional and stubdom are removed from the build in this release, see https://git.alpinelinux.org/aports/commit/?id=24217a24da3924039b000eb17c04bf3f01bf1f12

There is still the xen-qemu package, but the regular qemu aport is now built with Xen support, so a qemu-system-* package can be used instead.

You can choose to use it in your xl.cfg(1) like so: 

device_model_override = "/usr/bin/qemu-system-x86_64"
device_model_version = "qemu-xen"

uutils-coreutils

uutils-coreutils is repackaged as a sub-package to uutils in such a way as to be a drop-in replacement for GNU coreutils.

If you have both uutils-coreutils and coreutils installed, the latter will be purged and its symlinks replaced with ones pointing to the /usr/bin/uutils binary. The /usr/bin/uutils-* symlinks, previously provided by uutils-coreutils, no longer exist.

If you prefer to use GNU coreutils, remove the uutils-coreutils package before upgrading, and then add the uutils package, containing the /usr/bin/uutils binary.

A few parts of the uutils aport are also split into uutils-* subpackages, to avoid conflicts or other issues.

linux-firmware

linux-firmware is now compressed with ZSTD compression. If you run a custom built Linux kernel, you need to ensure that CONFIG_FW_LOADER_COMPRESS_ZSTD=y is set in your configuration.

Note-worthy updates

As always, a lot of packages were upgraded. Make sure to read the indivdual release notes of the projects you use.

  • Linux 6.12
  • busybox 1.37
  • GCC 14.2
  • LLVM 19
  • Go 1.23
  • Rust 1.83
  • PHP 8.4
  • GNOME 47
  • KDE Plasma 6.2
  • LXQt 2.1
  • Qt 6.8
  • wlroots 0.18

GCC 14

The Gnu Compiler Collection was upgraded to 14.2.0 and as a result, all packages built with gcc in Alpine 3.21 are compiled with GCC 14.2.0.

Make sure to read all changes: https://gcc.gnu.org/gcc-14/changes.html

LXQt 2.1

LXQt has been updated to release 2.1.0

  • It now uses Qt6
  • Many parts of LXQt are now Wayland ready¹, but Wayland ports of the following are pending: screengrab, lxqt-globalkeys, and keyboard indicator, some input settings, as well as settings for monitor, power button, and screen locker.
  • LXQt Panel has a new default application menu called Fancy Menu.

¹ lxqt-wayland-session has not been packaged yet, but most folks wanting to test on Wayland will want to use it.

Linux 6.12

Alpine 3.21.0 ships Linux 6.12.1 in the linux-lts package.

PostgreSQL 17

This release features postgresql17. We dropped support for postgresql14, and moved postgreSQL15 from main to community.

LLVM 19

We packaged LLVM 19 in our repositories. A total of 5 LLVM versions are supported: llvm19, llvm18, llvm17, llvm16, llvm15.

GNOME 47

gnome-software has been held back to version 45, after several regressions in the apk plugin on update. See #16637 for more details.

Significant removals

Disabled packages due to FTBS

The following packages are temporarily disabled because they failed to build. We will try to restore them as soon as possible.

ISC DHCP

If you are still running an ISC DHCP server, you are advised to migrate to a maintained alternative before upgrading to the 3.21 release.

ISC DHCP has been EoL since 2022. They have a guide for migrating to kea here: https://www.isc.org/dhcp_migration/

Up to, and including, the 3.20 version of Alpine, the dhcp aport has the subpackage keama that is a tool for helping with migration from ISC DHCP configuration to ISC Kea configuration.

Alternative DHCP servers packaged in Alpine include:

dracut-modules-network network-legacy removal

As a consequence of the above, the network-legacy module has been removed from dracut-modules-network, as it had a depedency on the dhclient sub-package of the ISC DHCP aport.

Gogs

gogs was removed due to multiple high-severity vulnerabilities for which issues have remained open for a year. The developers of Gogs were contacted multiple times by the Forgejo team but unfortunately received no response. Therefore we have removed Gogs from our repositories. (!75304)

Please consider migrating to forgejo or gitea. Both forks are available in our community repo.

The Gitea fork of Gogs was created in 2016 by contributors who were frustrated with the single-maintainer management model of Gogs. Forgejo is a fork of Gitea which was created as a result of the for-profit company Gitea Ltd taking over maintainership (see also https://forgejo.org/compare-to-gitea/).

neofetch

The upstream repository was archived in April and became unmaintained, therefore we have removed it from our repositories. fastfetch provides similar functionality.

.NET 6

.NET 6 reached EOL in 12 November 2024 (see https://devblogs.microsoft.com/dotnet/dotnet-6-end-of-support/) and the following packages have been moved to the testing repository (!73655):

Retrieved from "https://wiki.alpinelinux.org/w/index.php?title=Release_Notes_for_Alpine_3.21.0&oldid=28105"