Architecture: Difference between revisions

Latest revision as of 21:53, 22 May 2024

This material is work-in-progress ...

Do not follow instructions here until this notice is removed.
(Last edited by Fossdd on 22 May 2024.)

Alpine Hardware Architecture ("arch") Support

x86 Based

x86 - 32 bit x86 (ia32)
x86_64 - 64 bit x86 (amd64)

ARM Based

See Alpine on ARM.

armhf - 32 bit ARM (hard-float ABI) - ARMv6
armv7 - 32 bit ARMv7
aarch64 - 64 bit ARM - ARMv8

PowerPC Based

ppc64le - 64 bit PowerPC (little-endian)

IBM System Z Based

s390x

RISC V Based

riscv64 - 64 bit RISC V

LoongArch Based (planned)

loongarch64 - 64 bit LoongArch

Alpine Packaging

Package Building

Alpine Package Building Ports

APKBUILD - Package build scripts
aports - Official Alpine ports git repository

Package Building Tools

abuild

Package Format

Alpine uses packages in the .apk file format.

Package Management Tools

apk - Alpine Package Keeper (see Apk spec for more detail)

Boot Process

Boot Loader

The bootloader is responsible for finding the initfs, cmdline and kernel, and handling execution over to the kernel.

Some bootloaders allow the user to interactively pick which OS or kernel to use (if more than one is available).

EFI

The default setup uses GRUB2.
See also UEFI Secure Boot

BIOS

The default setup uses GRUB2.

Other

Kernel

Versioning

Flavors

lts - long-term support kernel, general purpose
virt - for running under virtual machines
edge - Latest stable kernel
rpi - Raspberry Pi
rpi2 - Raspberry Pi 2 (Alpine ≤v3.18 only, merged with rpi in current versions)
rpi4 - Raspberry Pi 4 (Alpine ≤v3.18 only, merged with rpi in current versions)
ashai - Apple M1

Signing

Command line options

modules="<modules>" - specify list of modules to be loaded by initramfs /init needed to mount real root filesystem.

Initfs

The kernel will decompress the stream of compressed cpio archives passed to it by the 'append' bootloader option to the root of 'rootfs', a tmpfs automatically mounted at '/' by the kernel at boot.

'/init' Script

Not to be confused with /sbin/init(see below)

This script is in the root of the initfs filesystem and is called by the kernel upon completion of its boot process. It is responsible for doing whatever steps are necessary to mount the real root file system to / and hand over control to /sbin/init.

Parses kernel command line options.
Uses nlplug-findfs to discover devices.
[Optionally] prompts for disk encryption secrets and unlocked encrypted partitions.

Initfs Module Handling

Modules required to mount the root filesystem and boot must either built into the kernel or available from with the initramfs filesystem through use of appended initrd cpio.gz files provided by the bootloader.

The /init script will first modprobe the modules specified by the modules= kernel command line option and by the name of the specified rootfs type. It will then load the contents of /etc/modules, which may include module options. Modules may be blacklisted from autoprobing (but NOT explicit insertion!) using the blacklist= kernel command line option which appends blacklist entries to '/etc/modprobe.d/boot-opt-blacklist.conf'.

Minimal Required Set

Todo: /media is not required even tough it is included in the alpine-baselayout

Directory Structure

/ /bin /boot /dev /etc /lib /lib/modules /media /media/cdrom /media/usb /mnt /proc /sbin /sys /usr /usr/bin /usr/sbin

Devices

/dev/null
/dev/console
/dev/kmsg

Mounts

/proc
/sys
/dev (can be disabled?)

Configuration

/etc/passwd
/etc/group
/etc/fstab

Binaries

busybox
apk

Feature Sets

Feature sets consist of lists for the set of modules and files that need to be included in a final initramfs to support the indicated feature.

Init

/sbin/init is the first process to be started in the live system after the initramfs completes its work. It is part of the Busybox package and should not be confused with the /init script mentioned above.

Loading of Kernel Modules

/etc/init.d/modules loads all modules specified in /etc/modules and /(etc|run|usr/lib|lib)/modules-load.d/*.conf

@@ Line 3: / Line 3: @@
 == Alpine Hardware Architecture ("arch") Support ==
 === x86 Based ===
 * [[x86]] - 32 bit x86 (ia32)
@@ Line 8: / Line 9: @@
 === ARM Based ===
+See [[Alpine on ARM]].
 * [[armhf]] - 32 bit ARM (hard-float ABI) - ARMv6
 * [[armv7]] - 32 bit ARMv7
@@ Line 17: / Line 21: @@
 === IBM System Z Based ===
 * [[s390x]]
+=== RISC V Based ===
+* [[riscv64]] - 64 bit RISC V
+=== LoongArch Based (planned) ===
+* [[loongarch64]] - 64 bit LoongArch
 == Alpine Packaging ==
@@ Line 23: / Line 33: @@
 ==== Alpine Package Building Ports ====
-* [[APKBUILD]] - Package build scripts
+* [[APKBUILD Reference|APKBUILD]] - Package build scripts
-* [[aports]] - Official Alpine ports git repository
+* [[Aports tree|aports]] - Official Alpine ports git repository
 ==== Package Building Tools ====
-* [[abuild]]
+* [[Abuild and Helpers|abuild]]
 === Package Format ===
-Alpine uses packages in the [[.apk file format]].
+Alpine uses packages in the [[Apk_spec#Package_Format_V2|.apk file format]].
 === Package Management Tools ===
-* [[apk]] - Alpine Package Keeper (see [[apk internals]] for more detail)
+* [[Alpine Package Keeper|apk]] - Alpine Package Keeper (see [[Apk spec]] for more detail)
 == Boot Process ==
@@ Line 63: / Line 72: @@
 ==== Versioning ====
 ===== Flavors =====
-* vanilla
+* lts - long-term support kernel, general purpose
-* hardened
+* virt - for running under virtual machines
-* virthardened
+* edge - Latest stable kernel
-* rpi
+* rpi - Raspberry Pi
+* rpi2 - Raspberry Pi 2 (Alpine ≤v3.18 only, merged with rpi in current versions)
+* rpi4 - Raspberry Pi 4 (Alpine ≤v3.18 only, merged with rpi in current versions)
+* ashai - Apple M1
 ==== Signing ====
@@ Line 86: / Line 98: @@
 ==== Initfs Module Handling ====
-Modules required to mount the root filesystem and boot must either built into the kernel or available from with the initramfs filesystem through use of appended initrd cpio.gz files provided by the [[bootloader]].
+Modules required to mount the root filesystem and boot must either built into the kernel or available from with the initramfs filesystem through use of appended initrd cpio.gz files provided by the [[Bootloaders|bootloader]].
 The /init script will first [[modprobe]] the modules specified by the modules= kernel command line option and by the name of the specified rootfs type. It will then load the contents of /etc/modules, which may include module options.
@@ Line 92: / Line 104: @@
 ==== Minimal Required Set ====
+{{todo|{{path|/media}} is not required even tough it is included in the {{pkg|alpine-baselayout}}}}
 ===== Directory Structure =====
 * / /bin /boot /dev /etc /lib /lib/modules /media /media/cdrom /media/usb /mnt /proc /sbin /sys /usr /usr/bin /usr/sbin
@@ Line 119: / Line 133: @@
 <code>/sbin/init</code> is the first process to be started in the live system after the initramfs completes its work. It is part of the [https://www.busybox.net/ Busybox] package and should not be confused with the <code>/init</code> script [[Architecture#'/init'_Script|mentioned above]].
-==== Module Loading ====
+==== Loading of Kernel Modules ====
 <code>/etc/init.d/modules</code> loads all modules specified in <code>/etc/modules</code> and <code>/(etc|run|usr/lib|lib)/modules-load.d/*.conf</code>
 [[Category:Hardware]]
 [[Category:Newbie]]