Root on ZFS with native encryption: Difference between revisions

From Alpine Linux
(fix link)
 
(63 intermediate revisions by 5 users not shown)
Line 1: Line 1:
= Objectives =
This is a guide for installing Alpine Linux with its root partition on an encrypted ZFS volume, using ZFS's own encryption capabilities. The system will be encrypted when powered off and will need to be unlocked by typing a passphrase at boot. To be able to boot the system, the `/boot` partition remains unencrypted.
This guide aims to setup encrypted Alpine Linux on ZFS with a layout compatible with boot environments. Mirror and RAID-Z supported.


Except EFI system partition and boot pool {{ic|/boot}}, everything is encrypted. Root pool is encrypted with ZFS native encryption and swap partition is encrypted with dm-crypt.
= OpenZFS Guide =


To do an unencrypted setup, simply omit {{ic|-O keylocation -O keyformat}} when creating root pool.
A guide on OpenZFS website supports native encryption, UEFI boot and legacy boot, and multi-disk.  See [https://openzfs.github.io/openzfs-docs/Getting%20Started/Alpine%20Linux/Root%20on%20ZFS.html here].


= Notes =
= Downloading Alpine =
== Swap on ZFS will cause dead lock ==
You shouldn't use a ZVol as a swap device, as it can deadlock under memory pressure. See [https://github.com/openzfs/zfs/issues/7734] This guide will set up swap on a separate partition with plain dm-crypt.


Resume from swap is not possible, because the key of swap partition can not be stored in the unencrypted boot pool. Busybox initramfs only supports unlocking exactly one LUKS container at boot, therefore boot pool and swap partition can not be both LUKS encrypted. A possible workaround is to import and mount boot pool after booting the system via systemd service.
Download the '''extended''' release from https://www.alpinelinux.org/downloads/ as only it contains the zfs kernel modules at the time of writing (2022-02-12).


== Resume from ZFS will corrupt the pool ==
Write it to a USB device and boot from it.
ZFS does not support freeze/thaw operations, which is required for resuming from hibernation, or suspend to disk. Attempt to resume from a swap on ZFS '''WILL''' corrupt the pool. See [https://github.com/openzfs/zfs/issues/260]
== Encrypted boot pool ==
GRUB supports booting from LUKS-1 encrypted containers. Therefore, it is possible to encrypt both boot pool and root pool to achieve full disk encryption.


To do this, format boot pool partition as LUKS-1 container and supply the encryption password here. Use keyfile for root pool and embed the keyfile in initramfs.
= Initial Setup =


Since there isn't any sensitive information in {{ic|/boot}} anyway (unless you want to use a persistent LUKS encrypted swap partition for resume from hibernation), encrypting boot pool provides no meaningful benefit and complicates the installation and recovery process.
Run the following to start the installation procedure:


= Pre-installation =
{{cmd|setup-alpine}}
UEFI is required. Supports single disk & multi-disk (stripe, mirror, RAID-Z) installation.


'''Existing data on target disk(s) will be destroyed.'''
Answer all the questions, and hit {{Key|Ctrl}}+{{Key|C}} when prompted for which disk you'd like to use.


Download the '''extended''' release from https://www.alpinelinux.org/downloads/, it's shipped with ZFS kernel module.
== Optional: SSH access ==


Write it to a USB and boot from it.
This section is optional and it assumes internet connectivity. You may enable sshd so you can ssh into the box and copy and paste the rest of the commands from these instructions into a terminal window.


== Setup live environment ==
Edit {{path|/etc/ssh/sshd_config}} and search for `Permit`. Change the value after `PermitRootLogin` to read `yes`
Run the following command to setup the live environment, select disk=none at the last step when asked for disk mode. See [[Installation#Questions_asked_by_setup-alpine]].
setup-alpine
The settings given here will be copied to the target system later by {{ic|setup-disk}}.


== Install system utilities ==
save and exit to shell. Run {{codeline|service sshd restart}}
apk update
apk add eudev sgdisk grub-efi zfs
modprobe zfs
Here we must install eudev to have persistent block device names. '''Do not use''' /dev/sda for ZFS pools.
setup-udev


= Variables =
Now you can ssh in as root. Do not forget to go back and comment this line out when you're done since it will be enabled on the resulting machine. You will be reminded again at the end of this doc.
In this step, we will set some variables to make our installation process easier.
DISK=/dev/disk/by-id/ata-HXY_120G_YS
Use unique disk path instead of {{ic|/dev/sda}} to ensure the correct partition can be found by ZFS.


Other variables
= Add required packages =
TARGET_USERNAME='your username'
ENCRYPTION_PWD='your root pool encryption password, 8 characters min'
TARGET_USERPWD='user account password'
Create a mountpoint
  MOUNTPOINT=`mktemp -d`
Create a unique suffix for the ZFS pools: this will prevent name conflict when importing pools on another Root on ZFS system.
poolUUID=$(dd if=/dev/urandom of=/dev/stdout bs=1 count=100 2>/dev/null |tr -dc 'a-z0-9' | cut -c-6)


= Partitioning =
{{cmd|apk add {{pkg|zfs}} {{pkg|sfdisk}} {{pkg|e2fsprogs}} {{pkg|syslinux}}}}
For a single disk, UEFI installation, we need to create at lease 3 partitions:
* EFI system partition
* Boot pool partition
* Root pool partition
Since [[GRUB]] only partially support ZFS, many features needs to be disabled on the boot pool. By creating a separate root pool, we can then utilize the full potential of ZFS.


Clear the partition table on the target disk and create EFI, boot and root pool parititions:
= Partition setup =
sgdisk --zap-all $DISK
sgdisk -n1:0:+512M -t1:EF00 $DISK
sgdisk -n2:0:+2G $DISK        # boot pool
sgdisk -n3:0:0 $DISK          # root pool
If you want to use a multi-disk setup, such as mirror or RAID-Z, partition every target disk with the same commands above.


== Optional: Swap partition ==
We're assuming that {{path|/dev/sda}} is the target storage device here and in the rest of the document, but the name of the storage device you wish to install to may be different. To see a list of storage devices and determine the correct one, type {{codeline|sfdisk -l}}.
[[Swap]] support on ZFS is also problematic, therefore it is recommended to create a separate Swap partition if needed. This guide will cover the creation of a separate swap partition.(can not be used for hibernation since the encryption key is discarded when power off.)


If you want to use swap, reserve some space at the end of disk when creating root pool:
{{cmd|echo -e "/dev/sda1: start{{=}}1M,size{{=}}100M,bootable\n/dev/sda2: start{{=}}101M" | sfdisk --quiet --label dos /dev/sda}}
sgdisk -n3:0:-8G $DISK        # root pool, reserve 8GB for swap at the end of the disk
sgdisk -n4:0:0 $DISK          # swap partition


= Boot and root pool creation =
== Create device nodes ==
As mentioned above, ZFS features need to be selectively enabled for GRUB. All available features are enabled when no {{ic|feature@}} is supplied.


Here we explicitly enable those GRUB can support.
{{cmd|mdev -s}}
zpool create \
    -o ashift=12 -d \
    -o feature@async_destroy=enabled \
    -o feature@bookmarks=enabled \
    -o feature@embedded_data=enabled \
    -o feature@empty_bpobj=enabled \
    -o feature@enabled_txg=enabled \
    -o feature@extensible_dataset=enabled \
    -o feature@filesystem_limits=enabled \
    -o feature@hole_birth=enabled \
    -o feature@large_blocks=enabled \
    -o feature@lz4_compress=enabled \
    -o feature@spacemap_histogram=enabled \
    -O acltype=posixacl -O canmount=off -O compression=lz4 \
    -O devices=off -O normalization=formD -O relatime=on -O xattr=sa \
    -O mountpoint=/boot -R $MOUNTPOINT \
    bpool_$poolUUID $DISK-part2
Nothing is stored directly under bpool and rpool, hence {{ic|1=canmount=off}}. The respective {{ic|mountpoint}} properties are more symbolic than practical.


For root pool all available features are enabled by default
== Create the {{path|/boot}} filesystem ==
echo $ENCRYPTION_PWD | zpool create \
    -o ashift=12 \
    -O encryption=aes-256-gcm \
    -O keylocation=prompt -O keyformat=passphrase \
    -O acltype=posixacl -O canmount=off -O compression=lz4 \
    -O dnodesize=auto -O normalization=formD -O relatime=on \
    -O xattr=sa -O mountpoint=/ -R $MOUNTPOINT \
    rpool_$poolUUID $DISK-part3


== Notes for multi-disk ==
{{cmd|mkfs.ext4 /dev/sda1}}
For mirror:
zpool create \
    ... \
    bpool_$poolUUID mirror \
    /dev/disk/by-id/target_disk1-part2 \
    /dev/disk/by-id/target_disk2-part2
zpool create \
    ... \
    rpool_$poolUUID mirror \
    /dev/disk/by-id/target_disk1-part3 \
    /dev/disk/by-id/target_disk2-part3
For RAID-Z, replace mirror with raidz, raidz2 or raidz3.


= Dataset creation =
= ZFS setup =
This layout is intended to separate root file system from persistent files. See [https://wiki.archlinux.org/index.php/User:M0p/Root_on_ZFS_Native_Encryption/Layout] for a description.
== Create the root zpool ==
{{Text art|<nowiki>
zfs create -o canmount=off -o mountpoint=none rpool_$poolUUID/HOME
zfs create -o canmount=off -o mountpoint=none rpool_$poolUUID/ROOT
zfs create -o canmount=off -o mountpoint=none bpool_$poolUUID/BOOT
zfs create -o mountpoint=/ -o canmount=noauto rpool_$poolUUID/ROOT/default
zfs create -o mountpoint=/boot -o canmount=noauto bpool_$poolUUID/BOOT/default
zfs mount rpool_$poolUUID/ROOT/default
zfs mount bpool_$poolUUID/BOOT/default
d='usr var var/lib'
for i in $d; do zfs create  -o canmount=off rpool_$poolUUID/ROOT/default/$i; done
d='srv usr/local'
for i in $d; do zfs create rpool_$poolUUID/ROOT/default/$i; done
d='log spool tmp'
for i in $d; do zfs create rpool_$poolUUID/ROOT/default/var/$i; done
zfs create -o mountpoint=/home rpool_$poolUUID/HOME/default
zfs create -o mountpoint=/root rpool_$poolUUID/HOME/default/root
zfs create rpool_$poolUUID/HOME/default/$TARGET_USERNAME
</nowiki>}}


= Format and mount EFI partition =
{{cmd|modprobe zfs
mkfs.vfat -n EFI $DISK-part1
zpool create -f -o ashift{{=}}12 \
mkdir $MOUNTPOINT/boot/efi
-O acltype{{=}}posixacl -O canmount{{=}}off -O compression{{=}}lz4 \
mount -t vfat $DISK-part1 $MOUNTPOINT/boot/efi
-O dnodesize{{=}}auto -O normalization{{=}}formD -O relatime{{=}}on -O xattr{{=}}sa \
-O encryption{{=}}aes-256-gcm -O keylocation{{=}}prompt -O keyformat{{=}}passphrase \
-O mountpoint{{=}}/ -R /mnt \
rpool /dev/sda2}}


= Install Alpine Linux to target disk =
You will have to enter your passphrase at this point. Choose wisely, as your passphrase is most likely [https://gitlab.com/cryptsetup/cryptsetup/wikis/FrequentlyAskedQuestions#5-security-aspects the weakest link in this setup].
== Preparations ==
GRUB will not find the correct path of root device without ZPOOL_VDEV_NAME_PATH=YES.
export ZPOOL_VDEV_NAME_PATH=YES
setup-disk refuse to run on ZFS by default, we need to add ZFS to the supported filesystem array.
sed -i 's|supported="ext|supported="zfs ext|g' /sbin/setup-disk


== Run setup-disk ==
A few notes on the options supplied to zpool:
BOOTLOADER=grub USE_EFI=y setup-disk -v $MOUNTPOINT
<ul>
Note that grub-probe will still fail despite ZPOOL_VDEV_NAME_PATH=YES variable set above. We will deal with this later inside chroot.
<li>{{codeline|ashift{{=}}12}} is recommended here because many drives today have 4KiB (or larger) physical sectors, even though they present 512B logical sectors</li>
<li>{{codeline|acltype{{=}}posixacl}} enables POSIX ACLs globally</li>
<li>{{codeline|normalization{{=}}formD}} eliminates some corner cases relating to UTF-8 filename normalization. It also enables `utf8only=on`, meaning that only files with valid UTF-8 filenames will be accepted.</li>
<li>{{codeline|xattr{{=}}sa}} vastly improves the performance of extended attributes, but is Linux-only. If you care about using this pool on other OpenZFS implementation don't specify this option.</li></ul>


= Chroot into new system =
After completing this, confirm that the pool has been created:
m='dev proc sys'
for i in $m; do mount --rbind /$i $MOUNTPOINT/$i; done
chroot $MOUNTPOINT /usr/bin/env TARGET_USERPWD=$TARGET_USERPWD TARGET_USERNAME=$TARGET_USERNAME poolUUID=$poolUUID /bin/sh


= Finish GRUB installation =
{{cmd|# zpool status}}
As GRUB installation failed half-way in [[#Run setup-disk]], we will finish it here.


Apply GRUB ZFS fix:
Should return something like:
export ZPOOL_VDEV_NAME_PATH=YES
Apply fixes in WARNING.
== GRUB fixes ==
1. GRUB will fail to detect the ZFS filesystem of {{ic|/boot}} with {{ic|stat}} from Busybox.


See [https://git.savannah.gnu.org/cgit/grub.git/tree/util/grub-mkconfig.in source file of grub-mkconfig], the problem is:
      pool: rpool
GRUB_DEVICE="`${grub_probe} --target=device /`"
    state: ONLINE
# will fail with `grub-probe: error: unknown filesystem.`
      scan: none requested
GRUB_FS="`${grub_probe} --device ${GRUB_DEVICE} --target=fs 2> /dev/null || echo unknown`"
    config:
# will also fail. The final fall back is
   
if [ x"$GRUB_FS" = xunknown ]; then
        NAME        STATE    READ WRITE CKSUM
     GRUB_FS="$(stat -f -c %T / || echo unknown)"
        rpool      ONLINE      0    0    0
fi
          sda2     ONLINE      0    0    0
# `stat` from coreutils will return `zfs`, the correct answer
   
# `stat` from busybox  will return `UNKNOWN`, cause `10_linux` script to fail
    errors: No known data errors
Therefore we need to install {{ic|coreutils}}.
apk add coreutils
=== Missing root pool ===
2. GRUB will stuff an empty result if it does not support root pool.


GRUB is lagging behind development of OpenZFS, see [https://lists.gnu.org/archive/html/grub-devel/2020-12/msg00239.html].
== Create the required datasets and mount root ==


A temporary fix is to replace detection of rpool with the method given in patch.
{{cmd|zfs create -o mountpoint{{=}}none -o canmount{{=}}off rpool/ROOT
sed -i "s/rpool=.*/rpool=\`zdb -l \${GRUB_DEVICE} \| awk -F \\\' '\/ name\/ { print \$2 }'\`/" /etc/grub.d/10_linux
zfs create -o mountpoint{{=}}legacy rpool/ROOT/alpine
Need to be applied upon every GRUB update until the patch is merged.
mount -t zfs rpool/ROOT/alpine /mnt/}}


This workaround uses {{ic|zdb}}, which does not have a stable output, according to manual page.
== Mount the {{path|/boot}} filesystem ==
zdb -l ${GRUB_DEVICE} | awk -F \' '/ name/ { print $2 }'


As the pool name is stored as disk label, it is possible to probe disk label and use that as root pool name,
{{cmd|mkdir /mnt/boot/
mount -t ext4 /dev/sda1 /mnt/boot/}}


An alternative using blkid from util-linux is:
== Enable ZFS' services ==
apk add util-linux
eval "$(blkid info -o export ${GRUB_DEVICE})" && echo $LABEL
Busybox version of blkid will return an empty result.


Choose one to your liking and don't forget to apply this every GRUB update.
{{cmd|rc-update add zfs-import sysinit
rc-update add zfs-mount sysinit}}


== Generate grub.cfg ==
= Install Alpine Linux =
After applying fixes, finally run
grub-mkconfig -o /boot/grub/grub.cfg


= Initramfs fixes =
{{cmd|setup-disk /mnt
== Fix zfs decrypt ==
dd if{{=}}/usr/share/syslinux/mbr.bin of{{=}}/dev/sda # write mbr so we can boot}}
See [https://gitlab.alpinelinux.org/alpine/mkinitfs/-/merge_requests/76].
== Enable persistent device names ==
Special modifications need to be made to populate {{ic|/dev/disk/by-*}} in initramfs.


See [https://gitlab.alpinelinux.org/alpine/mkinitfs/-/merge_requests/77 this merge request].
= Reboot and enjoy! =


With the changes in merge request applied, add {{ic|eudev}} to {{ic|/etc/mkinitfs/mkinitfs.conf}}.
😉
sed -i 's|zfs|zfs eudev|' /etc/mkinitfs/mkinitfs.conf
Rebuild initramfs with
mkinitfs $(ls -1 /lib/modules/)


= Mount datasets at boot =
'''NOTE:'''
rc-update add zfs-mount sysinit
If you went with the optional step, be sure to disable root login after you reboot.
rc-update add zfs-zed sysinit # zfs monitoring
Mounting {{ic|/boot}} dataset with fstab need {{ic|1=mountpoint=legacy}}:
zfs set mountpoint=legacy bpool_$poolUUID/BOOT/default
 
= Importing pools on boot =
zpool set cachefile=/etc/zfs/zpool.cache rpool_$poolUUID
zpool set cachefile=/etc/zfs/zpool.cache bpool_$poolUUID
 
= Add normal user account =
adduser -s /bin/sh -G wheel -G video -H -D -h /home/$TARGET_USERNAME $TARGET_USERNAME
chown -R $TARGET_USERNAME /home/$TARGET_USERNAME
echo "$TARGET_USERNAME:$TARGET_USERPWD" | chpasswd
 
= Optional: Enable encrypted swap partition =
Install {{ic|cryptsetup}}
apk add cryptsetup
Edit the <code>/mnt/etc/mkinitfs/mkinitfs.conf</code> file and append the <code>cryptsetup</code> module to the <code>features</code> parameter:
features="ata base ide scsi usb virtio ext4 lvm <u>cryptsetup</u> zfs"
Add relevant lines in {{ic|fstab}} and {{ic|crypttab}}. Replace {{ic|$DISK}} with actual disk.
echo swap $DISK-part4 /dev/urandom swap,cipher=aes-cbc-essiv:sha256,size=256 >> /etc/crypttab
echo /dev/mapper/swap  none swap defaults 0 0 >> /etc/fstab
Rebuild initramfs with {{ic|mkinitfs}}.
 
= Finish installation =
Take a snapshot for the clean installation for future use and export all pools.
exit
zfs snapshot -r rpool_$poolUUID/ROOT/default@install
zfs snapshot -r bpool_$poolUUID/BOOT/default@install
Pools must be exported before reboot, or they will fail to be imported on boot.
mount | grep -v zfs | tac | grep $MOUNTPOINT | awk '{print $3}' | \
  xargs -i{} umount -lf {}
zpool export bpool_$poolUUID
zpool export rpool_$poolUUID
 
= Reboot =
 
reboot
= Disk space stat =
Without optional swap or cryptsetup:
*bpool used 25.2M
*rpool used 491M
*efi used 416K
 
= Recovery in Live environment =
After installing zfs packages, run the following command:
 
Create a mount point and store encryption password in a variable:
MOUNTPOINT=`mktemp -d`
ENCRYPTION_PWD='YOUR DISK ENCRYPTION PASSWORD, 8 MINIMUM'
Find the unique UUID of your pool with
zpool import
Import rpool without mounting datasets: {{ic|-N}} for not mounting all datasets; {{ic|-R}} for alternate root.
poolUUID=abc123
zpool import -N -R $MOUNTPOINT rpool_$poolUUID
Load encryption key
echo $ENCRYPTION_PWD | zfs load-key -a
As {{ic|1=canmount=noauto}} is set for {{ic|/}} dataset, we have to mount it manually. To find the dataset, use
zfs list rpool_$poolUUID/ROOT
Mount {{ic|/}} dataset
zfs mount rpool_$UUID/ROOT/''$dataset''
Mount other datasets
zfs mount -a
Import bpool
zpool import -N -R $MOUNTPOINT bpool_$UUID
Find and mount the {{ic|/boot}} dataset, same as above.
zfs list bpool_$UUID/BOOT
zfs mount bpool_$UUID/BOOT/''$dataset''
Chroot
mount --rbind /dev  $MOUNTPOINT/dev
mount --rbind /proc $MOUNTPOINT/proc
mount --rbind /sys  $MOUNTPOINT/sys
chroot $MOUNTPOINT /bin/sh
 
After chroot, mount {{ic|/efi}}
mount /boot/efi
After fixing the system, don't forget to umount and export the pools:
mount | grep -v zfs | tac | grep $MOUNTPOINT | awk '{print $3}' | \
  xargs -i{} umount -lf {}
zpool export bpool_$poolUUID
zpool export rpool_$poolUUID

Latest revision as of 17:18, 21 August 2023

This is a guide for installing Alpine Linux with its root partition on an encrypted ZFS volume, using ZFS's own encryption capabilities. The system will be encrypted when powered off and will need to be unlocked by typing a passphrase at boot. To be able to boot the system, the `/boot` partition remains unencrypted.

OpenZFS Guide

A guide on OpenZFS website supports native encryption, UEFI boot and legacy boot, and multi-disk. See here.

Downloading Alpine

Download the extended release from https://www.alpinelinux.org/downloads/ as only it contains the zfs kernel modules at the time of writing (2022-02-12).

Write it to a USB device and boot from it.

Initial Setup

Run the following to start the installation procedure:

setup-alpine

Answer all the questions, and hit Ctrl+C when prompted for which disk you'd like to use.

Optional: SSH access

This section is optional and it assumes internet connectivity. You may enable sshd so you can ssh into the box and copy and paste the rest of the commands from these instructions into a terminal window.

Edit /etc/ssh/sshd_config and search for `Permit`. Change the value after `PermitRootLogin` to read `yes`

save and exit to shell. Run service sshd restart

Now you can ssh in as root. Do not forget to go back and comment this line out when you're done since it will be enabled on the resulting machine. You will be reminded again at the end of this doc.

Add required packages

apk add zfs sfdisk e2fsprogs syslinux

Partition setup

We're assuming that /dev/sda is the target storage device here and in the rest of the document, but the name of the storage device you wish to install to may be different. To see a list of storage devices and determine the correct one, type sfdisk -l.

echo -e "/dev/sda1: start=1M,size=100M,bootable\n/dev/sda2: start=101M" | sfdisk --quiet --label dos /dev/sda

Create device nodes

mdev -s

Create the /boot filesystem

mkfs.ext4 /dev/sda1

ZFS setup

Create the root zpool

modprobe zfs zpool create -f -o ashift=12 \ -O acltype=posixacl -O canmount=off -O compression=lz4 \ -O dnodesize=auto -O normalization=formD -O relatime=on -O xattr=sa \ -O encryption=aes-256-gcm -O keylocation=prompt -O keyformat=passphrase \ -O mountpoint=/ -R /mnt \ rpool /dev/sda2

You will have to enter your passphrase at this point. Choose wisely, as your passphrase is most likely the weakest link in this setup.

A few notes on the options supplied to zpool:

  • ashift=12 is recommended here because many drives today have 4KiB (or larger) physical sectors, even though they present 512B logical sectors
  • acltype=posixacl enables POSIX ACLs globally
  • normalization=formD eliminates some corner cases relating to UTF-8 filename normalization. It also enables `utf8only=on`, meaning that only files with valid UTF-8 filenames will be accepted.
  • xattr=sa vastly improves the performance of extended attributes, but is Linux-only. If you care about using this pool on other OpenZFS implementation don't specify this option.

After completing this, confirm that the pool has been created:

# zpool status

Should return something like: 

     pool: rpool
    state: ONLINE
     scan: none requested
   config:
   
       NAME        STATE     READ WRITE CKSUM
       rpool       ONLINE       0     0     0
         sda2      ONLINE       0     0     0
   
   errors: No known data errors

Create the required datasets and mount root

zfs create -o mountpoint=none -o canmount=off rpool/ROOT zfs create -o mountpoint=legacy rpool/ROOT/alpine mount -t zfs rpool/ROOT/alpine /mnt/

Mount the /boot filesystem

mkdir /mnt/boot/ mount -t ext4 /dev/sda1 /mnt/boot/

Enable ZFS' services

rc-update add zfs-import sysinit rc-update add zfs-mount sysinit

Install Alpine Linux

setup-disk /mnt dd if=/usr/share/syslinux/mbr.bin of=/dev/sda # write mbr so we can boot

Reboot and enjoy!

😉

NOTE: If you went with the optional step, be sure to disable root login after you reboot.

Retrieved from "https://wiki.alpinelinux.org/w/index.php?title=Root_on_ZFS_with_native_encryption&oldid=24380"