Backlight: Difference between revisions
Prabuanand (talk | contribs) (added information about installing and using ddcutil) |
Prabuanand (talk | contribs) (added clarity on testing and akms support with links) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Backlight control of liquid-crystal displays (LCDs) screen is covered in this page. | Backlight control of liquid-crystal displays (LCDs) screen is covered in this page. Controlling display backlight requires either the proper udev rules, or using some form of privilege escalation. | ||
{{Pkg|brightnessctl}} is one popular package | There are multiple utilities available for this purpose. | ||
== Brightnessctl == | |||
The [https://github.com/Hummer12007/brightnessctl brightnessctl] utility available in {{Pkg|brightnessctl}} package is one popular and reliable alternative, although its default udev rules require too wide permissions (see {{Issue|15409}}). You may need your own rules, or configure doas to allow running it as an unprivileged user. | |||
Optionally enable brightnessctl service to restore brightness settings on reboot:{{Cmd|# rc-update add brightnessctl}} | |||
To use <Code>brightnessctl</Code> to control external monitors, the [https://gitlab.com/ddcci-driver-linux/ddcci-driver-linux ddcci-driver-linux] is needed. The relevant {{Pkg|ddcci-driver-linux-src}} package is available in [[Repositories#Testing|testing]] repository. This driver requires Alpine Kernel Module Support {{Pkg|akms}}. | |||
== Ddcutil == | == Ddcutil == | ||
The | |||
The [https://www.ddcutil.com/ ddcutil] utility available in the {{Pkg|ddcutil}} package can be used to control brightness in external monitors, if your hardware supports it. | |||
Once the package is installed, check the current brightness of your monitor by issuing the command {{Cmd|ddcutil -d 1 getvcp 10}} | Once the package is installed, check the current brightness of your monitor by issuing the command {{Cmd|ddcutil -d 1 getvcp 10}} | ||
To set brightness of your monitor to 50% issue the command: {{Cmd|ddcutil -d 1 setvcp 10 50}} | To set brightness of your monitor to 50% issue the command: {{Cmd|ddcutil -d 1 setvcp 10 50}} | ||
| Line 18: | Line 28: | ||
ddcutil requires module i2c-dev. | ddcutil requires module i2c-dev. | ||
</Pre> | </Pre> | ||
If you receive the above error,on running <Code>ddcutil</Code>, then load the <Code>i2c-dev</Code> kernel module:{{Cmd|# modprobe i2c-dev}} | If you receive the above error, on running <Code>ddcutil</Code>, then load the <Code>i2c-dev</Code> kernel module:{{Cmd|# modprobe i2c-dev}} | ||
Rebooting the computer after installing {{Pkg|ddcutil}} should automatically load the above module based on {{Path|/usr/lib/modules-load.d/ddcutil.conf}}. | |||
== See Also == | |||
* [https://github.com/jirutka/akms Alpine Kernel Module Support(AKMS) official website ] | |||
[[Category:Desktop]] | |||
Latest revision as of 05:55, 18 December 2024
Backlight control of liquid-crystal displays (LCDs) screen is covered in this page. Controlling display backlight requires either the proper udev rules, or using some form of privilege escalation.
There are multiple utilities available for this purpose.
Brightnessctl
The brightnessctl utility available in brightnessctl package is one popular and reliable alternative, although its default udev rules require too wide permissions (see #15409). You may need your own rules, or configure doas to allow running it as an unprivileged user.
Optionally enable brightnessctl service to restore brightness settings on reboot:
# rc-update add brightnessctl
To use brightnessctl to control external monitors, the ddcci-driver-linux is needed. The relevant ddcci-driver-linux-src package is available in testing repository. This driver requires Alpine Kernel Module Support akms.
Ddcutil
The ddcutil utility available in the ddcutil package can be used to control brightness in external monitors, if your hardware supports it.
Once the package is installed, check the current brightness of your monitor by issuing the command
ddcutil -d 1 getvcp 10
To set brightness of your monitor to 50% issue the command:
ddcutil -d 1 setvcp 10 50
Troubleshooting
No /dev/i2c devices exist
The command ddcutil may generate the below error:
Unexpected error. Unable to open sysfs directory /sys/class/drm/card1-HDMI-A-1/ddc/i2c-dev: No such file or directory Unexpected error. Unable to open sysfs directory /sys/class/drm/card1-HDMI-A-2/ddc/i2c-dev: No such file or directory No /dev/i2c devices exist. ddcutil requires module i2c-dev.
If you receive the above error, on running ddcutil, then load the i2c-dev kernel module:
# modprobe i2c-dev
Rebooting the computer after installing ddcutil should automatically load the above module based on /usr/lib/modules-load.d/ddcutil.conf.