Ppc64le: Difference between revisions

From Alpine Linux
No edit summary
(Removed Architectures Category)
 
(29 intermediate revisions by 9 users not shown)
Line 1: Line 1:
This page is used to describe the ppc64le port.
{{DISPLAYTITLE:ppc64le}}
This page is used to describe the [https://en.wikipedia.org/wiki/Ppc64 ppc64le] port.


== Testing (for developers) ==
= Testing (for developers) =


The hosting sponsor for the ppc64le port operate a miniCloud service which will provide Alpine ppc64le images for testing. For more information, google "openpower minicloud" (I would include a link but our wiki software is too paranoid apparently.  that's cool.)
The hosting sponsor for the '''ppc64le''' port operates a miniCloud service, which provides ppc64le images to Alpine for testing.


== Hardware ==
View [http://openpower.ic.unicamp.br/minicloud/ their] website for more info.


You can buy POWER8 hardware from IBM or other vendors, the IBM S812LC server is reasonably price competitive to similar x86 servers and fully supported by the ppc64le port.
= Hardware =
You can buy [https://en.wikipedia.org/wiki/POWER8 POWER8] or [https://en.wikipedia.org/wiki/POWER9 POWER9] hardware from IBM or from other vendors. For example, the '''Raptor Computing System Blackbird''' workstation is reasonably priced, competitive when compared to similar x86 servers, and is fully supported by the ppc64le port.


These are the IBM machines model that would support Alpine Linux:


* IBM Power System S821LC  
The following are the '''IBM''' machine models that would support Alpine Linux:
* IBM Power System S822LC for Big Data
* IBM Power System S821LC [http://www-03.ibm.com/systems/power/hardware/s821lc/index.html]{{dead link}}
* IBM Power System S822LC for Commercial Computing  
* IBM Power System S822LC for Big Data [http://www-03.ibm.com/systems/power/hardware/s822lc-big-data/index.html]{{dead link}}
* IBM Power System S822LC for High Performance Computing  
* IBM Power System S822LC for Commercial Computing [http://www-03.ibm.com/systems/power/hardware/s822lc-commercial/index.html]{{dead link}}
* IBM Power System S812L and S822L  
* IBM Power System S822LC for High Performance Computing [IBM Power System S822LC for High Performance Computing]
* IBM Power System S824L  
* IBM Power System S812L and S822L [http://www-03.ibm.com/systems/power/hardware/s812l-s822l/index.html]{{dead link}}
* IBM Power System S812  
* IBM Power System S824L [http://www-03.ibm.com/systems/power/hardware/s824l/index.html]{{dead link}}
* IBM Power System S822
* IBM Power System S812 [http://www-03.ibm.com/systems/power/hardware/s812/index.html]{{dead link}}
* IBM Power System S814
* IBM Power System S822 [http://www-03.ibm.com/systems/power/hardware/s822/index.html]{{dead link}}
* IBM Power System S824  
* IBM Power System S814 [http://www-03.ibm.com/systems/power/hardware/s814/index.html]{{dead link}}
* IBM Power Enterprise Systems for the cloud  
* IBM Power System S824 [http://www-03.ibm.com/systems/power/hardware/s824/index.html]{{dead link}}
* IBM Power System E850C  
* IBM Power Enterprise Systems for the cloud [http://www-03.ibm.com/systems/power/hardware/enterprise-cloud/index.html]{{dead link}}
* IBM Power System E850
* IBM Power System E850C [http://www-03.ibm.com/systems/power/hardware/e850c/index.html]{{dead link}}
* IBM Power System E870  
* IBM Power System E850 [http://www-03.ibm.com/systems/power/hardware/e850/index.html]{{dead link}}
* IBM Power System E880  
* IBM Power System E870 [http://www-03.ibm.com/systems/power/hardware/e870/index.html]{{dead link}}
* Tyan TN76-BP016
* IBM Power System E880 [http://www-03.ibm.com/systems/power/hardware/e880/index.html]{{dead link}}
* Tyan GT75-BP012
* Tyan TN71-BP012


== Installation ==


TODO
'''Raptor Computing System''' also has machines:
* Talos II [https://www.raptorcs.com/content/base/products.html]
* Blackbird [https://www.raptorcs.com/content/base/products.html]


== Archive status ==


Initial bringup on builders.
'''Tyan''' also has machines:
* Tyan TN76-BP016
* Tyan GT75-BP012
* Tyan TN71-BP012


Missing packages:


'''main'''
'''Open Power''' machines:
* Rackspace Barreleye [https://www.nextplatform.com/2015/10/19/rackspace-forges-first-barreleye-openpower-servers/]
* Google Zaius [https://cloudplatform.googleblog.com/2016/10/introducing-Zaius-Google-and-Rackspaces-open-server-running-IBM-POWER9.html]


aiccu
= Installation =
apg
cmocka
collectd
compiler-rt
freeswitch
gdb
libgsasl
libquvi-scripts
linux-vanilla
lua-xml
luajit
nagios-plugins
ncftp(*)
opensmtpd
php5
pmacct
py-curl
py-imaging
qemu
ser2net
smokeping(*)
strace
valgrind
weechat
xf86-video-rendition


The Alpine {{AlpineLatest}} ppc64le ISO is available [https://dl-cdn.alpinelinux.org/alpine/latest-stable/releases/ppc64le/alpine-standard-{{AlpineLatest}}-ppc64le.iso here].


'''Testing''':
The user login is '''root''' with no password.


afl
== Booting Alpine from CD-ROM using qemu ==
aqbanking
audit
captagent
corkscrew
dante
dash
drawterm
dspam
etckeeper
exim
grub
hitch
jpegoptim
libcypher-parser
libgnomecanvas
libmhash
lldb
lxappearance-obconf
mlocate
mxml
ndctl
opensips
ossec-hids
perl-autobox
perl-www-curl
py-flake8-class
py-sphinxcontrib-programoutput
qperf
rapidjson
silc-client
slrn
thermald
timew
w_scan
wmi-client
xbps


To start qemu using the Alpine ISO as CD-ROM, you can use a command similar to:
{{cmd|$ doas qemu-system-ppc64 -device spapr-vlan,netdev{{=}}net0,mac{{=}}4C:45:42:45:79:F7 -netdev bridge,br{{=}}br0,id{{=}}net0 -m 8G -smp 16,sockets{{=}}16,cores{{=}}1,threads{{=}}1 -nodefaults -nographic -serial stdio -cdrom alpine-standard-{{AlpineLatest}}-ppc64le.iso}}


'''Community''':
If running on a ppc64le host, you can append {{ic|-enable-kvm}} to the above command.


cfengine(fixed)
== Installing Alpine to hard-disk using qemu ==
chicken
 
geany-plugins(*)
Create a disk to install Alpine on it:
gns3-server
{{cmd|$ qemu-img create alpine_disk.img 16G}}
go-bootstrap
 
irssi-xmpp
Start qemu attaching the created disk and using Alpine ISO as CD-ROM. Here is an example of the qemu command:
libevhtp
{{cmd|$ doas qemu-system-ppc64 -hda alpine_disk.img -device spapr-vlan,netdev{{=}}net0,mac{{=}}4C:45:42:45:79:F7 -netdev bridge,br{{=}}br0,id{{=}}net0 -enable-kvm -m 8G -smp 16,sockets{{=}}16,cores{{=}}1,threads{{=}}1 -nodefaults -nographic -serial stdio -cdrom alpine-standard-{{AlpineLatest}}-ppc64le.iso}}
libtermkey
 
makepasswd(fixed)
Run the {{ic|setup-alpine}} script:
monitoring-plugins
{{cmd|setup-alpine}}
mumudvb
 
nodejs-current
After running the {{ic|setup-alpine}} script, select the disk (in this example, '''sda''') when the following configuration appears:
obnam
<pre>
ocaml
Available disks are:
openblas
sda  (17.2 GB QEMU    QEMU HARDDISK)
openjdk7
Which disk(s) would you like to use? (or '?' for help or 'none') [none] : sda
openlibm
</pre>
perl-data-denter
 
perl-log-dispatch-config
When asked how you would like to use the disk, select '''sys''', and select '''yes''' when asked whether to erase the disk.
perl-term-progressbar
 
psmisc
{{note|Internet connection is required to complete the setup. {{issue|11384|The grub-ieee1275 and sfdisk are not included in ISO}.}}}}
py-greenlet
py-pygit2
The installation will format the disk properly.  After this finishes, type {{ic|reboot}}.
py-sphinx-autobuild
 
raptor2
== Booting Alpine from CD-ROM using qemu and saving modifications between reboots ==
shadow
 
vigra(fixed)
When using Alpine in this mode, you need to use Alpine Local Backup ({{ic|lbu}}) to save your modifications between reboots.  This requires some writable medium, usually removable.
 
Create a disk to save Alpine modifications:
{{cmd|$ qemu-img create alpine_disk.img 8G}}
 
Start qemu attaching the created disk and using Alpine ISO as CD-ROM. Here is the example of the qemu command:
{{cmd|$ doas qemu-system-ppc64 -hda alpine_disk.img -device spapr-vlan,netdev{{=}}net0,mac{{=}}4C:45:42:45:79:F7 -netdev bridge,br{{=}}br0,id{{=}}net0 -enable-kvm -m 8G -smp 16,sockets{{=}}16,cores{{=}}1,threads{{=}}1 -nodefaults -nographic -serial stdio -cdrom alpine-standard-{{AlpineLatest}}-ppc64le.iso}}
 
Format the attached disk and add it to the {{path|/etc/fstab}} file:
{{cmd|$ apk add {{pkg|e2fsprogs|arch=ppc64le}} 
$ mkfs.ext4 /dev/sda
$ echo "/dev/sda        /media/sda      ext4    noauto,rw 0 0" >> /etc/fstab
$ mkdir /media/sda
$ mkdir /media/sda/cache}}
 
Set <code>lbu</code> to write to the attached disk, setting <code>LBU_MEDIA=sda</code> in the {{path|/etc/lbu/lbu.conf}} file.
 
Run the {{ic|setup-alpine}} command, and select the following configurations when asked:
* Enter where to store configs: <code>('floppy', 'sda', 'usb' or 'none') [none]: sda </code>
* Enter apk cache directory <code>(or '?' or 'none') [/media/sda/cache]: /media/sda/cache</code>
 
The last step is to commit the changes:
{{cmd|$ lbu commit}}
 
After performing these configurations, you can reboot Alpine and the modifications will be saved. The next time a change happens, you just need to run the {{ic|lbu commit}} command, as the configurations are already done.
 
It is important to know that, by default, {{ic|lbu}} only cares about modifications in {{path|/etc}} and its subdirectories, with the exception of {{path|/etc/init.d}}!
 
= See also =
* [[Alpine_local_backup|Alpine local backup]] - For more information about how to use <code>lbu</code> and how to include a new folder to backup.
 
= Reference =
* ABI - https://openpowerfoundation.org/?resource_lib=64-bit-elf-v2-abi-specification-power-architecture
 
[[Category:Hardware]]
[[Category:ppc64le]]

Latest revision as of 15:53, 15 October 2024

This page is used to describe the ppc64le port.

Testing (for developers)

The hosting sponsor for the ppc64le port operates a miniCloud service, which provides ppc64le images to Alpine for testing.

View their website for more info.

Hardware

You can buy POWER8 or POWER9 hardware from IBM or from other vendors. For example, the Raptor Computing System Blackbird workstation is reasonably priced, competitive when compared to similar x86 servers, and is fully supported by the ppc64le port.


The following are the IBM machine models that would support Alpine Linux:


Raptor Computing System also has machines:


Tyan also has machines:

  • Tyan TN76-BP016
  • Tyan GT75-BP012
  • Tyan TN71-BP012


Open Power machines:

  • Rackspace Barreleye [17]
  • Google Zaius [18]

Installation

The Alpine 3.21.0 ppc64le ISO is available here.

The user login is root with no password.

Booting Alpine from CD-ROM using qemu

To start qemu using the Alpine ISO as CD-ROM, you can use a command similar to:

$ doas qemu-system-ppc64 -device spapr-vlan,netdev=net0,mac=4C:45:42:45:79:F7 -netdev bridge,br=br0,id=net0 -m 8G -smp 16,sockets=16,cores=1,threads=1 -nodefaults -nographic -serial stdio -cdrom alpine-standard-3.21.0-ppc64le.iso

If running on a ppc64le host, you can append -enable-kvm to the above command.

Installing Alpine to hard-disk using qemu

Create a disk to install Alpine on it:

$ qemu-img create alpine_disk.img 16G

Start qemu attaching the created disk and using Alpine ISO as CD-ROM. Here is an example of the qemu command:

$ doas qemu-system-ppc64 -hda alpine_disk.img -device spapr-vlan,netdev=net0,mac=4C:45:42:45:79:F7 -netdev bridge,br=br0,id=net0 -enable-kvm -m 8G -smp 16,sockets=16,cores=1,threads=1 -nodefaults -nographic -serial stdio -cdrom alpine-standard-3.21.0-ppc64le.iso

Run the setup-alpine script:

setup-alpine

After running the setup-alpine script, select the disk (in this example, sda) when the following configuration appears:

Available disks are:
sda   (17.2 GB QEMU     QEMU HARDDISK)
Which disk(s) would you like to use? (or '?' for help or 'none') [none] : sda

When asked how you would like to use the disk, select sys, and select yes when asked whether to erase the disk.

Note: Internet connection is required to complete the setup. #11384. The grub-ieee1275 and sfdisk are not included in ISO}.

The installation will format the disk properly. After this finishes, type reboot.

Booting Alpine from CD-ROM using qemu and saving modifications between reboots

When using Alpine in this mode, you need to use Alpine Local Backup (lbu) to save your modifications between reboots. This requires some writable medium, usually removable.

Create a disk to save Alpine modifications:

$ qemu-img create alpine_disk.img 8G

Start qemu attaching the created disk and using Alpine ISO as CD-ROM. Here is the example of the qemu command:

$ doas qemu-system-ppc64 -hda alpine_disk.img -device spapr-vlan,netdev=net0,mac=4C:45:42:45:79:F7 -netdev bridge,br=br0,id=net0 -enable-kvm -m 8G -smp 16,sockets=16,cores=1,threads=1 -nodefaults -nographic -serial stdio -cdrom alpine-standard-3.21.0-ppc64le.iso

Format the attached disk and add it to the /etc/fstab file:

$ apk add e2fsprogs $ mkfs.ext4 /dev/sda $ echo "/dev/sda /media/sda ext4 noauto,rw 0 0" >> /etc/fstab $ mkdir /media/sda $ mkdir /media/sda/cache

Set lbu to write to the attached disk, setting LBU_MEDIA=sda in the /etc/lbu/lbu.conf file.

Run the setup-alpine command, and select the following configurations when asked:

  • Enter where to store configs: ('floppy', 'sda', 'usb' or 'none') [none]: sda
  • Enter apk cache directory (or '?' or 'none') [/media/sda/cache]: /media/sda/cache

The last step is to commit the changes:

$ lbu commit

After performing these configurations, you can reboot Alpine and the modifications will be saved. The next time a change happens, you just need to run the lbu commit command, as the configurations are already done.

It is important to know that, by default, lbu only cares about modifications in /etc and its subdirectories, with the exception of /etc/init.d!

See also

  • Alpine local backup - For more information about how to use lbu and how to include a new folder to backup.

Reference

* ABI - https://openpowerfoundation.org/?resource_lib=64-bit-elf-v2-abi-specification-power-architecture