CEPH: Difference between revisions

From Alpine Linux
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 4: Line 4:


== Installing MONITORs ==
== Installing MONITORs ==
=== Bootstrap the first MONITOR ===
=== Bootstrapping the first MONITOR ===
In this example we use 3 hosts as monitor and manager roles:
In this example we use 3 hosts as monitor and manager roles:
<pre>
<pre>
Line 34: Line 34:
mon_host = $MON_HOST1_IP, $MON_HOST2_IP, $MON_HOST3_IP
mon_host = $MON_HOST1_IP, $MON_HOST2_IP, $MON_HOST3_IP
mon_allow_pool_delete = true
mon_allow_pool_delete = true
ms_bind_ipv4 = false
ms_bind_ipv4 = false # change as needed
ms_bind_ipv6 = true
ms_bind_ipv6 = true # change as needed
public_network = $PUBLIC_NETWORK
public_network = $PUBLIC_NETWORK
# Enable authentication
# Enable authentication
Line 131: Line 131:
Inspect that the first node was bootstrapped correctly running {{Cmd|ceph -s}}
Inspect that the first node was bootstrapped correctly running {{Cmd|ceph -s}}


=== Add other MONITOR nodes ===
=== Adding other MONITOR nodes ===
Copy /etc/ceph/ceph.conf, /tmp/ceph.mon.keyring /etc/ceph/ceph.client.admin.keyring /var/lib/ceph/bootstrap-osd/ceph.keyring from existing monitor to the new monitor node.
Copy /etc/ceph/ceph.conf, /tmp/ceph.mon.keyring /etc/ceph/ceph.client.admin.keyring /var/lib/ceph/bootstrap-osd/ceph.keyring from existing monitor to the new monitor node.
<pre>
<pre>
Line 148: Line 148:


If <code>ceph -s</code> returns <code>mon is allowing insecure global_id reclaim</code> fix with {{Cmd|ceph config set mon auth_allow_insecure_global_id_reclaim false}}
If <code>ceph -s</code> returns <code>mon is allowing insecure global_id reclaim</code> fix with {{Cmd|ceph config set mon auth_allow_insecure_global_id_reclaim false}}


== Installing MANAGERs ==
== Installing MANAGERs ==

Latest revision as of 10:58, 7 May 2024

This material is work-in-progress ...

work in progress
(Last edited by Larena on 7 May 2024.)

CEPH is a software defined storage platform. There are various methods and tools to deploy CEPH, none of which (to my knowledge, please correct this statement if wrong) work on Alpine. However CEPH has been available in the community repository since Alpine 3.10. Thanks to the maintainer that has done an amazing job, even maintaining multiple versions! So that's why this how-to, we will see how to deploy CEPH monitors, managers and OSDs, via APK, manually. Eventually I'm planning to write an Ansible playbook Alpine-specific.

Installing MONITORs

Bootstrapping the first MONITOR

In this example we use 3 hosts as monitor and manager roles: 

MON_HOST1="mon01"
MON_HOST1_IP="%IP_ADDRESS%"
MON_HOST2="mon02"
MON_HOST2_IP="%IP_ADDRESS%"
MON_HOST3="mon03"
MON_HOST3_IP="%IP_ADDRESS%"
FSID=$(cat /proc/sys/kernel/random/uuid) #store this FSID
echo $FSID
CLUSTER_NAME="ceph" # default value if unspecified
HOSTNAME=$(cat /etc/hostname)
PUBLIC_NETWORK="%NETWORK_CIDR%"
MYNET="%NETWORK_CIDR%"
VERSION=17


#apk add ceph$VERSION-mon ceph$VERSION-mon-daemon ceph$VERSION-mon-tools ceph$VERSION-openrc sudo


cat << EOF > /etc/ceph/$CLUSTER_NAME.conf 
[global]
# Cluster unique identifier
fsid = $FSID
mon_initial_members = $MON_HOST1
mon_host = $MON_HOST1_IP, $MON_HOST2_IP, $MON_HOST3_IP
mon_allow_pool_delete = true
ms_bind_ipv4 = false # change as needed
ms_bind_ipv6 = true # change as needed
public_network = $PUBLIC_NETWORK
# Enable authentication
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx
# https://docs.ceph.com/en/latest/rados/configuration/pool-pg-config-ref/#pool-pg-and-crush-config-reference
osd_pool_default_size = 3 # Write an object three times
osd_pool_default_min_size = 2 # Accept an I/O operation to a degraded PG that has two copies of an object
osd_pool_default_pg_num = 128 # total number of OSDs * 100 / osd_pool_default_size. Use nearest power of two.
osd_crush_chooseleaf_type = 1
rgw_data = /var/lib/ceph/radosgw/\$cluster-\$id # literal variables

[mon]
mon_data = /var/lib/ceph/mon/\$cluster-$FSID # "cluster" is a literal variable
EOF


ceph-authtool --create-keyring /tmp/$CLUSTER_NAME.mon.keyring --gen-key -n mon. --cap mon 'allow *'
ceph-authtool --create-keyring /etc/ceph/$CLUSTER_NAME.client.admin.keyring --gen-key -n client.admin --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow *' --cap mgr 'allow *'
ceph-authtool --create-keyring /var/lib/ceph/bootstrap-osd/$CLUSTER_NAME.keyring --gen-key -n client.bootstrap-osd --cap mon 'profile bootstrap-osd' --cap mgr 'allow r'

ceph-authtool /tmp/ceph.mon.keyring --import-keyring /etc/ceph/$CLUSTER_NAME.client.admin.keyring
ceph-authtool /tmp/ceph.mon.keyring --import-keyring /var/lib/ceph/bootstrap-osd/$CLUSTER_NAME.keyring

chown ceph:ceph /tmp/$CLUSTER_NAME.mon.keyring

monmaptool --create --add $MON_HOST1 $MON_HOST1_IP --add $MON_HOST2 $MON_HOST2_IP --add $MON_HOST3 $MON_HOST3_IP --fsid $FSID /tmp/monmap

install -d -o ceph /var/lib/ceph/mon/$CLUSTER_NAME-$FSID

sudo -u ceph ceph-mon --cluster $CLUSTER_NAME --mkfs -i $HOSTNAME --inject-monmap /tmp/monmap --keyring /tmp/$CLUSTER_NAME.mon.keyring


Create AWall policies: 

cat << EOF > /etc/awall/optional/ceph-mon.json
{
  "description": "Ceph cluster monitor component",

  "service": {
    "ceph-mon": { "proto": "tcp", "port": [ 3300, 6789 ] }
  },

  "filter": [
    {
      "src": "\$MYNET",
      "out": "_fw",
      "service": "ceph-mon",
      "action": "accept"
    },
    {
      "in": "_fw",
      "dest": "\$MYNET",
      "service": "ceph-mon",
      "action": "accept"
    }
  ]
}
EOF

cat << EOF > /etc/awall/optional/ceph-client-osd.json
{
  "description": "Ceph cluster OSD client",
  
  "service": {
    "ceph-osd": { "proto": "tcp", "port": "6800-7300" }
  },

  "filter": [
    {
      "in": "_fw",
      "dest": "\$MYNET",
      "service": "ceph-osd",
      "action": "accept"
    }
  ]
}
EOF

awall enable ceph-mon
awall enable ceph-client-osd
awall activate -f
ln -s ceph /etc/init.d/ceph-mon.$HOSTNAME
rc-update add ceph-mon.$HOSTNAME
openrc

Inspect that the first node was bootstrapped correctly running

ceph -s

Adding other MONITOR nodes

Copy /etc/ceph/ceph.conf, /tmp/ceph.mon.keyring /etc/ceph/ceph.client.admin.keyring /var/lib/ceph/bootstrap-osd/ceph.keyring from existing monitor to the new monitor node. 

install -d --owner ceph --group ceph /etc/ceph /var/lib/ceph/bootstrap-osd
install -d -o ceph /var/lib/ceph/mon/$CLUSTER_NAME-$FSID
chown ceph /tmp/$CLUSTER_NAME.mon.keyring

monmaptool --create --add $MON_HOST1 $MON_HOST1_IP --add $MON_HOST2 $MON_HOST2_IP --add $MON_HOST3 $MON_HOST3_IP --fsid $FSID /tmp/monmap

sudo -u ceph ceph-mon --cluster $CLUSTER_NAME --mkfs -i $HOSTNAME --inject-monmap /tmp/monmap --keyring /tmp/$CLUSTER_NAME.mon.keyring

ln -s ceph /etc/init.d/ceph-mon.$HOSTNAME
rc-update add ceph-mon.$HOSTNAME
openrc

If ceph -s returns mon is allowing insecure global_id reclaim fix with

ceph config set mon auth_allow_insecure_global_id_reclaim false

Installing MANAGERs

install -d --owner ceph --group ceph /var/lib/ceph/mgr/$CLUSTER_NAME-$HOSTNAME
# note this keyring is unique per manager, does not need to be copied across the cluster!
ceph auth get-or-create mgr.$HOSTNAME mon 'allow profile mgr' osd 'allow *' mds 'allow *' > /var/lib/ceph/mgr/$CLUSTER_NAME-$HOSTNAME/keyring

cat << EOF > /etc/awall/optional/ceph-mgr.json
{
  "description": "Ceph cluster Manager component",
  
  "service": {
    "ceph-mgr": { "proto": "tcp", "port": "6800-7300" }
  },

  "filter": [
    {
      "src": "\$MYNET",
      "out": "_fw",
      "service": "ceph-mgr",
      "action": "accept"
    }
  ]
}
EOF

awall enable ceph-mgr
awall activate -f

apk add ceph$VERSION-mgr ceph$VERSION-mgr-dashboard
ln -s ceph /etc/init.d/ceph-mgr.$HOSTNAME
rc-update add ceph-mgr.$HOSTNAME
openrc

Expected issues:

Module 'restful' has failed dependency: PyO3 modules may only be initialized once per interpreter process

https://github.com/bazaah/aur-ceph/issues/20

https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/thread/FB7XE6WYDK3EBJYPABSPX5B2LEILWWJA/#FB7XE6WYDK3EBJYPABSPX5B2LEILWWJA

Workaround: ceph mgr module disable restful

Installing OSDs

setup-devd udev #alpine eudev drop-in replacement for udev
apk add ceph$VERSION-osd ceph$VERSION-osd-daemon ceph$VERSION-osd-tools eudev ceph$VERSION-openrc
mkdir -p /var/lib/ceph/bootstrap-osd /etc/ceph

Copy /var/lib/ceph/bootstrap-osd/$CLUSTER_NAME.keyring from a monitor node to /var/lib/ceph/bootstrap-osd/$CLUSTER_NAME.keyring

Copy /etc/ceph/ceph.conf from a monitor node to /etc/ceph/ceph.conf 

cat << EOF > /etc/awall/optional/ceph-client-mon.json
{
  "description": "Ceph cluster monitor client",
  
  "service": {
    "ceph-mon": { "proto": "tcp", "port": [ 3300, 6789 ] }
  },

  "filter": [
    {
      "in": "_fw",
      "dest": "\$MYNET",
      "service": "ceph-mon",
      "action": "accept"
    }
  ]
}
EOF

cat << EOF > /etc/awall/optional/ceph-osd.json
{
  "description": "Ceph cluster OSD component",
  
  "service": {
    "ceph-osd": { "proto": "tcp", "port": "6800-7300" }
  },

  "filter": [
    {
      "src": "\$MYNET",
      "out": "_fw",
      "service": "ceph-osd",
      "action": "accept"
    },
    {
      "in": "_fw",
      "dest": "\$MYNET",
      "service": "ceph-osd",
      "action": "accept"
    }
  ]
}
EOF

awall enable ceph-client-mon
awall enable ceph-osd
awall activate -f

ln -s /var/lib/ceph/bootstrap-osd/ceph.keyring /etc/ceph/ceph.client.bootstrap-osd.keyring #it seems it wants the keyring in this location
ceph-volume lvm create --data /dev/sdX --no-systemd



Retrieved from "https://wiki.alpinelinux.org/w/index.php?title=CEPH&oldid=26692"