This material needs expanding ...
Please help us expand this article by contributing.
You may want to customize the behavior of the default DHCP client (udhcpc from busybox), which is called by /sbin/ifup by having "dhcp" in /etc/network/interfaces.
The default behavior is driven by the script /usr/share/udhcpc/default.script
Entries in /etc/network/interfaces for dhcp interfaces will drive the udhcpc command line. For example: auto eth0 iface eth0 inet dhcp
Will set these parameters on the command line: -i eth0 -x hostname:myhostname
The hostname will send the DHCP option to the server to tell the server the name of this client.
Its default configuration may be overwritten by /etc/udhcpc/udhcpc.conf
Authorized key:value pairs are:
|key||default value||possible values|
|NO_GATEWAY||-||<list of iface names>|
|IF_PEER_DNS||yes||<anything but yes>|
|RESOLV_CONF||/etc/resolv.conf||no ; NO ; -|
|NO_DNS||-||<list of iface names>|
RESOLV_CONF="no" # Prevents overwriting of /etc/resolv.conf
Custom scripts can be added as /etc/udhcpc/pre-* and /etc/udhcpc/post-* to be run before/after deconfig/renew/bound DHCP events - they must be marked as executable by root, e.g. chmod 744
As an example, /etc/udhcpc/post-bound/mtu could contain, to change the interface MTU from the default (1500) to 1492, which is useful if on ADSL (which uses 8 bytes):
r=$(/sbin/ip route | grep ^default | head -n 1) # Needs iproute2 package, rather than busybox's "ip", to change mtu /sbin/ip route replace $r mtu 1492