Talk:Installation: Difference between revisions

From Alpine Linux
(→‎Booting from ISO: new section)
Line 4: Line 4:
== Booting from ISO ==
== Booting from ISO ==


Current system is a 2.8 Prescott Pentium IV with 2MB RAM, booting from a 1GB CF plugged into the IDE controller, with an attached 500GB SATA HDD for data. When I tried to install Alpine from the LiveCD to this card, which is listed as an hard drive by the BIOS, it complained of insufficient space. Fair enough. Next I tried to follow [http://www.pendrivelinux.com/boot-multiple-iso-from-usb-via-grub2-using-linux/| this recipe] to boot from Alpine 2.1.4 iso; at the end you find this tip:
Current system is a 2.8 Prescott Pentium IV with 2MB RAM, booting from a 1GB CF plugged into the IDE controller, with an attached 500GB SATA HDD for data. When I tried to install Alpine from the LiveCD to this card, which is listed as a hard drive by the BIOS, it complained of insufficient space. Fair enough. Next I tried to follow [http://www.pendrivelinux.com/boot-multiple-iso-from-usb-via-grub2-using-linux/| this recipe] to boot from Alpine 2.1.4 iso; at the end you find this tip:


:''Adding an Unlisted ISO: To try ISO Files that are not yet listed, use the existing menuentry examples in /boot/grub/grub.cfg and append any options normally found in the distributions syslinux.cfg file on the "append" line to the "linux" line of the menu entry.''
:''Adding an Unlisted ISO: To try ISO Files that are not yet listed, use the existing menuentry examples in /boot/grub/grub.cfg and append any options normally found in the distributions syslinux.cfg file on the "append" line to the "linux" line of the menu entry.''
Line 15: Line 15:
All I got when I tried to boot this was the following error:
All I got when I tried to boot this was the following error:


: Alpine Init 2.1.2
: '''Alpine Init 2.1.2'''
: /init: eval: line 1: syntax error: unexpected "("
: '''/init: eval: line 1: syntax error: unexpected "("'''
: kernel panic - not syncing: attempted to kill init!
: '''kernel panic - not syncing: attempted to kill init!'''
: Pid: 1, comm: init Not tainted 2.6.35.10-grsec #1-Alpine
: '''Pid: 1, comm: init Not tainted 2.6.35.10-grsec #1-Alpine'''
: [...]
: [...]


I must say all went well with the Linux Mint 10.10 iso, into which I'm able to boot with no issues. Anyone care to advise?
I must say all went well with the Linux Mint 10.10 and the TinyCore isos, into which I'm able to boot with no issues. Anyone care to advise?

Revision as of 07:37, 6 February 2011

About Installing Alpine on Compact Flash and Installing Alpine on USB, I think those two should be merged, steps are thesame. --K0gen 20:06, 25 February 2010 (UTC)

Booting from ISO

Current system is a 2.8 Prescott Pentium IV with 2MB RAM, booting from a 1GB CF plugged into the IDE controller, with an attached 500GB SATA HDD for data. When I tried to install Alpine from the LiveCD to this card, which is listed as a hard drive by the BIOS, it complained of insufficient space. Fair enough. Next I tried to follow this recipe to boot from Alpine 2.1.4 iso; at the end you find this tip:

Adding an Unlisted ISO: To try ISO Files that are not yet listed, use the existing menuentry examples in /boot/grub/grub.cfg and append any options normally found in the distributions syslinux.cfg file on the "append" line to the "linux" line of the menu entry.

So I downloaded the latest Alpine iso via wget and modified the appropriate grub.cfg lines to:

linux (loop)/boot/grsec initrd=/boot/grsec.gz iso-scan/filename=/alpine214.iso alpine_dev=usbdisk:vfat modules=loop,cramfs,sd-mod,usb-storage quiet
initrd (loop)/boot/grsec.gz

All I got when I tried to boot this was the following error:

Alpine Init 2.1.2
/init: eval: line 1: syntax error: unexpected "("
kernel panic - not syncing: attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.35.10-grsec #1-Alpine
[...]

I must say all went well with the Linux Mint 10.10 and the TinyCore isos, into which I'm able to boot with no issues. Anyone care to advise?