Setting Up a bridge: Difference between revisions

From Alpine Linux
(Propose merge)
(Redirect to New Bridge page)
 
Line 1: Line 1:
{{Merge|How to configure a network bridge|See also the discussion of bonding, vlans, and bridges on http://lists.alpinelinux.org/alpine-devel between 9 Mar and 23 Mar 2012}}
#REDIRECT [[Bridge]]
 
apk add bridge-utils
 
vi /etc/network/interfaces
 
auto br0
iface br0 inet static
pre-up brctl addbr br0
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-ip6tables
address 192.168.0.253
netmask 255.255.255.0
gateway 192.168.0.254
post-down brctl delbr br0
auto eth0
iface eth0 inet manual
up ip link set $IFACE up
up brctl addif br0 $IFACE
down brctl delif br0 $IFACE || true
down ip link set $IFACE down
auto eth1
iface eth1 inet manual
up ip link set $IFACE up
up brctl addif br0 $IFACE
down brctl delif br0 $IFACE || true
down ip link set $IFACE down
...
 
That way you create br0 with: ifup br0, and you can add/remove
individual interfaces to the bridge with ifup eth0, ifdown eth0.
 
 
[[Category:Networking]]

Latest revision as of 12:31, 22 August 2012

Redirect to: