Replacing non-Alpine Linux with Alpine remotely: Difference between revisions

From Alpine Linux
(how so use UUID for alpine_dev)
(replace /etc/init.d with rc-service)
 
(22 intermediate revisions by 11 users not shown)
Line 1: Line 1:
[[Category:HOWTO]]
{{obsolete}}
* What: Thes instructions are for installing Alpine Linux on a hosted ''physical'' server from a hosting company like serverpronto, bluehost, etc.
{{todo|this article is not compatible with posix shell but it should since alpine uses ash by default}}
* What: These instructions are for installing Alpine Linux on a hosted ''physical'' server from a hosting company like serverpronto, bluehost, etc.
* Why: Typically these companies run Debian, Fedora, or another Linux distribution.  This document explains how to get Alpine Linux on a machine with nothing but ssh access.
* Why: Typically these companies run Debian, Fedora, or another Linux distribution.  This document explains how to get Alpine Linux on a machine with nothing but ssh access.
== With VNC access ==
{{Note|Usually providers offer vnc access to the server, if that's not the case skip this.}}
Download an alpine iso that boots from ram, e.g. alpine-virt
  wget dl-cdn.alpinelinux.org/alpine/v3.5/releases/x86_64/alpine-virt-3.5.2-x86_64.iso
Flash the image to the drive of your server, e.g. /dev/sda
  dd if=alpine-virt-3.5.2-x86_64.iso of=/dev/sda
Reboot, and login again from vnc with root. Alpine is now running from ram, and should have mounted /dev/sda on /media/sda, paste it into ram.
  mkdir /media/setup
  cp -a /media/sda/* /media/setup
Copy also the kernel modules which are located in /.modloop
  mkdir /lib/setup
  cp -a /.modloop/* /lib/setup
Unmount modloop and the media folder
  rc-service modloop stop
  umount /dev/sda
Move back the files in place
  mv /media/setup/* /media/sda/
  mv /lib/setup/* /.modloop/
Finally you can format the disk to install alpine
  setup-disk
Or just run the the whole setup
  setup-alpine
== Without VNC access ==


{{Note|This process will not work with alpine-1.9.0_rc4 or ''earlier'''''  Use Alpine-1.9.1 or later for best results.}}
{{Note|This process will not work with alpine-1.9.0_rc4 or ''earlier'''''  Use Alpine-1.9.1 or later for best results.}}
Line 18: Line 44:


== Create apk overlay suitable for hard disk based tmpfs boot ==
== Create apk overlay suitable for hard disk based tmpfs boot ==
{{Note|This entire section can be replaced by setting up a box from scratch, using setup-alpine and selecting 'none' for the install disk, then running 'lbu ci' to save the apkovl. You can then open the overlay and set up networking ''exactly'' as it should be on the target box, then repackage the overlay and drop in the root of alpine_dev on the remote host.)}}


The first step is to create Alpine configuration file with basic configuration of the host. We need the new box to start networking and ssh in the beginning so we can reconnect to it after reboot.
The first step is to create Alpine configuration file with basic configuration of the host. We need the new box to start networking and ssh in the beginning so we can reconnect to it after reboot.
Line 36: Line 64:
  cp -a /root/.ssh/authorized_keys root/.ssh
  cp -a /root/.ssh/authorized_keys root/.ssh
  echo "/root/.ssh" > etc/lbu/include
  echo "/root/.ssh" > etc/lbu/include


Find out which shell is used for root:
Find out which shell is used for root:
Line 42: Line 69:
  grep ^root /etc/passwd
  grep ^root /etc/passwd


If its /bin/sh, you are good.  If not, edit etc/passwd and change it to /bin/sh.
If its /bin/ash, you are good.  If not, edit etc/passwd and change it to /bin/ash.
  sed -i -e '/^root:/s:/bin/bash:/bin/sh:' etc/passwd
  sed -i -e '/^root:/s:/bin/bash:/bin/ash:' etc/passwd


{{Note|If you don't do this, nobody (even with phyiscal access) will be able to log into the machine.}}
{{Note|If you don't do this, nobody (even with physical access) will be able to log into the machine.}}


Create etc/network/interfaces with network configuration (unless it was previously copied over). It should look something like:
Create etc/network/interfaces with network configuration (unless it was previously copied over). It should look something like:
Line 57: Line 84:
       gateway gw.ad.dr.es
       gateway gw.ad.dr.es


Since Alpine 3.13 must be:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
        address ip.ad.dr.es/cidr
        gateway gw.ad.dr.es
'''Make sure there is no whitespace at end of lines''' in interfaces file. Busybox ifup is very picky.
'''Make sure there is no whitespace at end of lines''' in interfaces file. Busybox ifup is very picky.


Make sure your etc/resolv.conf exists; if not create etc/resolv.conf with the nameserver configuration like:
Make sure your etc/resolv.conf exists; if not create etc/resolv.conf with the nameserver configuration like:
  nameserver dns.ip.ad.dr
  nameserver dns.ip.ad.dr
options edns0 trust-ad single-request-reopen


Create the apk world (var/lib/apk/world) with essential packages:
Create the apk world (etc/apk/world) with essential packages:
  mkdir -p var/lib/apk
  mkdir -p etc/apk
  echo "alpine-base iproute2 openssh bash" > var/lib/apk/world
  echo "alpine-base iproute2 openssh" > etc/apk/world
 
(bash is technically not needed, but include it in case you forgot to edit your etc/passwd file correctly)


'''Double check the IP configuration and ssh keys.'''
'''Double check the IP configuration and ssh keys.'''
Line 85: Line 118:
== Install Alpine cd-rom image on hard disk ==
== Install Alpine cd-rom image on hard disk ==


We need to copy over two sets of information: the boot kernel (kernel, initramdisk and boot configuration) and operating system boot data (overlay, apk packages and kernel modules). These can reside on same partition if they fit. However, /boot is usually small, so you might want to put the apks on separate partition. This guide assumes they are on hda1 (/boot) and hda2 (/) with both having ext3 filesystems. If you don't have ext3 on / or /boot, then you might be able to disable swap and reformat the swap partition as ext3 and use that.
We need to copy over two sets of information: the boot kernel (kernel, initramdisk and boot configuration) and operating system boot data (overlay, apk packages and kernel modules). These can reside on same partition if they fit. However, /boot is usually small, so you might want to put the apks on separate partition. This guide assumes they are on sda1 (/boot) and sda2 (/) with both having ext3 filesystems. If you don't have ext3 on / or /boot, then you might be able to disable swap and reformat the swap partition as ext3 and use that.


Download an alpine iso and mount it; for example
Download an alpine iso and mount it; for example
Line 97: Line 130:


Next we make the Alpine Linux kernel bootable (requires syslinux) and use fdisk to mark the /boot partition as bootable (if not done already):
Next we make the Alpine Linux kernel bootable (requires syslinux) and use fdisk to mark the /boot partition as bootable (if not done already):
  dd if=/usr/share/syslinux/mbr.bin of=/dev/hda   # on some older systems its /usr/lib/syslinux/mbr.bin
  dd if=/usr/share/syslinux/mbr.bin of=/dev/sda   # on some older systems its /usr/lib/syslinux/mbr.bin
  fdisk /dev/hda
  fdisk /dev/sda


Make sure that /boot dir has a symlink pointing to itself. This is to handle the case when /boot is on separate partition.
Make sure that /boot dir has a symlink pointing to itself. This is to handle the case when /boot is on separate partition.
   ln -sf . /boot/boot
   ln -sf . /boot/boot


Create /boot/extlinux.conf with contents like (alpine_dev needs special care, hard-disks are sd* in alpine due to new kernel and libata; you also need to check the filesystem type; kernel and initrd are relative to partition root):
Create /boot/extlinux.conf with contents like (check the filesystem type for alpine_dev; kernel and initrd are relative to partition root):
  timeout 20
  timeout 20
  prompt 1
  prompt 1
Line 117: Line 150:
  label grsec
  label grsec
  kernel /boot/grsec
  kernel /boot/grsec
  append initrd=/boot/grsec.gz alpine_dev=UUID=44ea33e2-deb4-4a29-88e2-fc8a4ef80ab0:ext3 modules=loop,cramfs,sd-mod,usb
  append initrd=/boot/grsec.gz alpine_dev=UUID=44ea33e2-deb4-4a29-88e2-fc8a4ef80ab0:ext3 modloop=grsec.cmg modules=loop,cramfs,sd-mod,usb-storage,ext3 quiet
storage,ext3 quiet
 
[Comment added by IceCodeNew]
 
I tried this instruction on Ubuntu 20.04, and I'm installing Alpine-virt 3.13.2.
 
I found there is no such file named `*/syslinux/mbr.bin`, but even if I skip the step which issuing `dd if=/usr/share/syslinux/mbr.bin of=/dev/sda`, the machine was able to boot alpine without problem.
 
Here is the extlinux.conf I use (since there are lots of files that had been renamed): 
timeout 20
prompt 1
default grsec
label grsec
kernel /boot/vmlinuz-virt
append initrd=/boot/initramfs-virt alpine_dev=UUID=db153994-91fe-426f-bd88-f751e07f97f2:ext4 modloop=/boot/modloop-virt modules=loop,cramfs,sd-mod,usb-storage,ext4 quiet
 
[End of comment]


Finally make the /boot partition bootable by extlinux.
Finally make the /boot partition bootable by extlinux.
  extlinux -i /boot
  extlinux -i /boot
(Tested on 2.1.2 and higher)  Make sure:
* grsec.cmg is on /
* [something].apkovl.tar.gz is on /
* grsec.gz is on /boot
* The apline_dev UUID value points to whatever is currently /
* the partition for /boot is flagged as bootable
* the output of extlinux was for the partition currently mounted at /boot


== Install Alpine on hard-disk ==
== Install Alpine on hard-disk ==
Line 130: Line 187:


Edit /etc/apk/repositories to contain your favorite Alpine mirror or just:
Edit /etc/apk/repositories to contain your favorite Alpine mirror or just:
  http://dl-3.alpinelinux.org/alpine/v1.10/packages/main
  https://dl-cdn.alpinelinux.org/alpine/v3.18/main/


Finally run:
Finally run:
  /etc/init.d/modloop stop
  rc-service modloop stop
  apk update
  apk update
  setup-disk
  setup-disk
Line 140: Line 197:


Reboot once more, and you have the server with native Alpine hard disk installation.
Reboot once more, and you have the server with native Alpine hard disk installation.
[[Category:Installation]]

Latest revision as of 09:58, 17 November 2023

This material is obsolete ...

Please feel free to help us make an up-to-date version. (Discuss)

Todo: this article is not compatible with posix shell but it should since alpine uses ash by default


  • What: These instructions are for installing Alpine Linux on a hosted physical server from a hosting company like serverpronto, bluehost, etc.
  • Why: Typically these companies run Debian, Fedora, or another Linux distribution. This document explains how to get Alpine Linux on a machine with nothing but ssh access.

With VNC access

Note: Usually providers offer vnc access to the server, if that's not the case skip this.

Download an alpine iso that boots from ram, e.g. alpine-virt

 wget dl-cdn.alpinelinux.org/alpine/v3.5/releases/x86_64/alpine-virt-3.5.2-x86_64.iso

Flash the image to the drive of your server, e.g. /dev/sda

 dd if=alpine-virt-3.5.2-x86_64.iso of=/dev/sda

Reboot, and login again from vnc with root. Alpine is now running from ram, and should have mounted /dev/sda on /media/sda, paste it into ram.

 mkdir /media/setup
 cp -a /media/sda/* /media/setup

Copy also the kernel modules which are located in /.modloop

 mkdir /lib/setup
 cp -a /.modloop/* /lib/setup

Unmount modloop and the media folder

 rc-service modloop stop
 umount /dev/sda

Move back the files in place

 mv /media/setup/* /media/sda/
 mv /lib/setup/* /.modloop/

Finally you can format the disk to install alpine

 setup-disk

Or just run the the whole setup

 setup-alpine

Without VNC access

Note: This process will not work with alpine-1.9.0_rc4 or earlier Use Alpine-1.9.1 or later for best results.
Warning: Practice on a computer with physical access first. If something goes wrong, the remote box will very likely be left in an unusable state. In that case, you get to turn in a support request to regen the server back to "factory fresh" mode.


Warning: Really. Practice this first.


Prerequisites:

  • SSH access to the remote box (needs to have SSH server running)
  • Alpine Linux supported hardware
  • Adventurous mind
  • Nerves of steel

These instructions are based on a debian (physical) server, and all steps are performed while logged into the machine. So you should start with a machine that has ssh running.

Create apk overlay suitable for hard disk based tmpfs boot

Note: This entire section can be replaced by setting up a box from scratch, using setup-alpine and selecting 'none' for the install disk, then running 'lbu ci' to save the apkovl. You can then open the overlay and set up networking exactly as it should be on the target box, then repackage the overlay and drop in the root of alpine_dev on the remote host.)

The first step is to create Alpine configuration file with basic configuration of the host. We need the new box to start networking and ssh in the beginning so we can reconnect to it after reboot.

Create basic layout for the overlay:

mkdir overlay
cd overlay
mkdir -p etc/ssh etc/network etc/runlevels/{default,boot,sysinit,shutdown} root/.ssh etc/lbu

You can also use default Alpine configuration files. In this case you should use ssh key to authorize yourself (as root password is empty, and ssh has empty passwords disabled).

If you want to keep the existing host identity (e.g. SSH key), you can copy them over:

cp -a /etc/{passwd,group,shadow,gshadow,hostname,resolv.conf,network/interfaces,ssh} etc/
cp /etc/network/interfaces etc/network

Copy over your ssh authorized_keys and make sure its included in future:

cp -a /root/.ssh/authorized_keys root/.ssh
echo "/root/.ssh" > etc/lbu/include

Find out which shell is used for root:

grep ^root /etc/passwd

If its /bin/ash, you are good. If not, edit etc/passwd and change it to /bin/ash.

sed -i -e '/^root:/s:/bin/bash:/bin/ash:' etc/passwd
Note: If you don't do this, nobody (even with physical access) will be able to log into the machine.

Create etc/network/interfaces with network configuration (unless it was previously copied over). It should look something like:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
      address ip.ad.dr.es
      netmask 255.255.255.0
      gateway gw.ad.dr.es

Since Alpine 3.13 must be:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
       address ip.ad.dr.es/cidr
       gateway gw.ad.dr.es

Make sure there is no whitespace at end of lines in interfaces file. Busybox ifup is very picky.

Make sure your etc/resolv.conf exists; if not create etc/resolv.conf with the nameserver configuration like:

nameserver dns.ip.ad.dr
options edns0 trust-ad single-request-reopen

Create the apk world (etc/apk/world) with essential packages:

mkdir -p etc/apk
echo "alpine-base iproute2 openssh" > etc/apk/world

Double check the IP configuration and ssh keys.

Finally, make the essential services start up automatically and create the overlay file:

ln -s /etc/init.d/{hwclock,modules,sysctl,hostname,bootmisc,syslog} etc/runlevels/boot/
ln -s /etc/init.d/{devfs,dmesg,mdev,hwdrivers} etc/runlevels/sysinit/
ln -s /etc/init.d/{networking,sshd} etc/runlevels/default/
ln -s /etc/init.d/{mount-ro,killprocs,savecache} etc/runlevels/shutdown/
tar czf ../host.apkovl.tar.gz *

Verify the overlay with "tar tzf" to see that it contains everything in proper places, and ensure it is in the / directory

tar tzvf host.apkovl.tar.gz
cp host.apkovl.tar.gz /

Install Alpine cd-rom image on hard disk

We need to copy over two sets of information: the boot kernel (kernel, initramdisk and boot configuration) and operating system boot data (overlay, apk packages and kernel modules). These can reside on same partition if they fit. However, /boot is usually small, so you might want to put the apks on separate partition. This guide assumes they are on sda1 (/boot) and sda2 (/) with both having ext3 filesystems. If you don't have ext3 on / or /boot, then you might be able to disable swap and reformat the swap partition as ext3 and use that.

Download an alpine iso and mount it; for example

 wget {{#latestalp:alpine|url}}
 mount alpine*.iso /cdrom -o loop

Copy the apkovl and the contents of cd-rom image to root of current installation:

cp host.apkovl.tar.gz /
cp -a /cdrom/* /

Next we make the Alpine Linux kernel bootable (requires syslinux) and use fdisk to mark the /boot partition as bootable (if not done already):

dd if=/usr/share/syslinux/mbr.bin of=/dev/sda   # on some older systems its /usr/lib/syslinux/mbr.bin
fdisk /dev/sda

Make sure that /boot dir has a symlink pointing to itself. This is to handle the case when /boot is on separate partition.

 ln -sf . /boot/boot

Create /boot/extlinux.conf with contents like (check the filesystem type for alpine_dev; kernel and initrd are relative to partition root):

timeout 20
prompt 1
default grsec
label grsec
  kernel /boot/grsec
  append initrd=/boot/grsec.gz alpine_dev=sda2:ext3 modloop=grsec.cmg modules=loop,cramfs,sd-mod,usb-storage,ext3 quiet

From Alpine Linux 2.1 you can use the UUID of the partition that holds the apkovl and the apks directory, the current root. Use blkid to get the proper UUID. By using UUID we solve the problem when there are multiple disks and we don't knowing how kernel enumerates them after boot. Example extlinux.conf:

timeout 20
prompt 1
default grsec
label grsec
	kernel /boot/grsec
	append initrd=/boot/grsec.gz alpine_dev=UUID=44ea33e2-deb4-4a29-88e2-fc8a4ef80ab0:ext3 modloop=grsec.cmg modules=loop,cramfs,sd-mod,usb-storage,ext3 quiet

[Comment added by IceCodeNew]

I tried this instruction on Ubuntu 20.04, and I'm installing Alpine-virt 3.13.2.

I found there is no such file named `*/syslinux/mbr.bin`, but even if I skip the step which issuing `dd if=/usr/share/syslinux/mbr.bin of=/dev/sda`, the machine was able to boot alpine without problem.

Here is the extlinux.conf I use (since there are lots of files that had been renamed):

timeout 20
prompt 1
default grsec
label grsec
	kernel /boot/vmlinuz-virt
	append initrd=/boot/initramfs-virt alpine_dev=UUID=db153994-91fe-426f-bd88-f751e07f97f2:ext4 modloop=/boot/modloop-virt modules=loop,cramfs,sd-mod,usb-storage,ext4 quiet

[End of comment]

Finally make the /boot partition bootable by extlinux.

extlinux -i /boot


(Tested on 2.1.2 and higher) Make sure:

  • grsec.cmg is on /
  • [something].apkovl.tar.gz is on /
  • grsec.gz is on /boot
  • The apline_dev UUID value points to whatever is currently /
  • the partition for /boot is flagged as bootable
  • the output of extlinux was for the partition currently mounted at /boot

Install Alpine on hard-disk

Reboot the box. And wait for it to come alive again. If it doesn't, tough luck. So dry practice with local box, with as identical hardware as possible.

Once back in the box, we are running in Alpine Linux from tmpfs. So just do a regular installation of Alpine from network via ssh connection.

Edit /etc/apk/repositories to contain your favorite Alpine mirror or just:

https://dl-cdn.alpinelinux.org/alpine/v3.18/main/

Finally run:

rc-service modloop stop
apk update
setup-disk

After hard disk setup is complete, copy ssh_authorized_keys to hard disk.

Reboot once more, and you have the server with native Alpine hard disk installation.