OpenVCP: Difference between revisions

From Alpine Linux
No edit summary
mNo edit summary
(8 intermediate revisions by 4 users not shown)
Line 1: Line 1:
This document will be a quick c/p guide to setup openvcp on Alpine linux.
[http://www.openvcp.org/ OpenVCP] is a Open-Source VServer Control Panel published under the GNU General Public Licence (GPL). OpenVCP is developed for use with Linux in combination with Linux-Vserver (  http://www.linux-vserver.org ). It provides a web-based interface to manage a whole farm of VServer hosts, build guests, control the guests, account traffic and much more.
 
== What is openvcp? ==
 
OpenVCP is a Open-Source VServer Control Panel published under the GNU General Public Licence (GPL). OpenVCP is developed for use with Linux in combination with Linux-Vserver (  http://www.linux-vserver.org ). It provides a web-based interface to manage a whole farm of VServer hosts, build guests, control the guests, account traffic and much more.


== Install openvcp daemon ==
== Install openvcp daemon ==


apk add util-vserver libvserver php-tls sqlite sqlite-dev libxml2 libxml2-dev libpcap libpcap-dev rsync libtool alpine-sdk
{{Cmd|apk add util-vserver util-vserver-dev php-tls sqlite sqlite-dev libxml2 libxml2-dev libpcap libpcap-dev rsync libtool alpine-sdk}}


Download  
Download  


cd /tmp/
{{Cmd|cd /tmp/
wget http://files.openvcp.org/openvcpd-0.5rc3.tar.gz
wget http://files.openvcp.org/openvcpd-0.5rc3.tar.gz}}


Unpack and delete tar file
Unpack and delete tar file


tar zxvf openvcpd-0.5rc3.tar.gz  
{{Cmd|tar zxvf openvcpd-0.5rc3.tar.gz}}


cd openvcpd-0.5rc3/
{{Cmd|cd openvcpd-0.5rc3/}}


Configure Compile & install the daemon
Configure Compile & install the daemon


./configure --prefix=/usr --sysconfdir=/etc
{{Cmd|<nowiki>./configure --prefix=/usr --sysconfdir=/etc
make
make
make install  
make install</nowiki>}}


Create directories  
Create directories  


mkdir -p /vservers/backups
{{Cmd|mkdir -p /vservers/backups
mkdir -p /vservers/userbackups
mkdir -p /vservers/userbackups
mkdir -p /vservers/images
mkdir -p /vservers/images}}


Edit the config file
Edit the config file
Line 36: Line 32:
Change "IP" to your own ip and "Ifaces" to the interface you want to measure traffic on
Change "IP" to your own ip and "Ifaces" to the interface you want to measure traffic on


nano /etc/openvcpd.conf
{{Cmd|nano /etc/openvcpd.conf}}


Copy some images to your image directory usually "/vservers/images" (e.g.:  http://www.openvcp.org/wiki/Downloads. ( These Images are just folders that contain a Linux system )  
Copy some images to your image directory usually "/vservers/images" (e.g.:  http://www.openvcp.org/wiki/Downloads. ( These Images are just folders that contain a Linux system )  
Line 42: Line 38:
Start the daemon  
Start the daemon  


openvcpd
{{Cmd|openvcpd}}
 
== Install openvcp web access ==
 
apk add lighttpd mysql mysql-client php-mysql php-mysqli php php-xml php-gettext php-sockets php-gd
 
== Configuring Lighttpd ==
 
'''Edit lighttpd.conf'''
 
nano +46 /etc/lighttpd/lighttpd.conf


Uncomment lines:
== Install openvcp web access with Lighttpd ==


uncoment    include "mod_fastcgi.conf", save and exit
{{:Setting Up Lighttpd With FastCGI}}


Install extra packages


'''Starting http service and adding to boot'''
{{Cmd|apk add mysql mysql-client php-mysql php-mysqli php-gettext php-sockets}}
 
  /etc/init.d/lighttpd start && rc-update add lighttpd default


== Configuring MySql ==
== Configuring MySql ==
Line 98: Line 83:
Change Folder Persmissions
Change Folder Persmissions


  chmod -R 777 /usr/share/webapps/openvcp/core/cache
chmod -R 777 /usr/share/webapps/openvcp/core/cache


Make symlinks to openvcp
Make symlinks to openvcp
Line 130: Line 115:


Congratulations, you installed openvcp!
Congratulations, you installed openvcp!


You have openvcp web access system working, to access go to http://WEBSERVER_IP_ADDRESS/openvcp/ user: ''Admin'' password: ''test''
You have openvcp web access system working, to access go to http://WEBSERVER_IP_ADDRESS/openvcp/ user: ''Admin'' password: ''test''


 
[[Category:Server]]
== Licence ==
[[Category:Virtualization]]
 
'''Licence:'''
 
openvcp is published under the GNU General Public Licence (GPL).

Revision as of 10:45, 22 January 2013

OpenVCP is a Open-Source VServer Control Panel published under the GNU General Public Licence (GPL). OpenVCP is developed for use with Linux in combination with Linux-Vserver ( http://www.linux-vserver.org ). It provides a web-based interface to manage a whole farm of VServer hosts, build guests, control the guests, account traffic and much more.

Install openvcp daemon

apk add util-vserver util-vserver-dev php-tls sqlite sqlite-dev libxml2 libxml2-dev libpcap libpcap-dev rsync libtool alpine-sdk

Download

cd /tmp/ wget http://files.openvcp.org/openvcpd-0.5rc3.tar.gz

Unpack and delete tar file

tar zxvf openvcpd-0.5rc3.tar.gz

cd openvcpd-0.5rc3/

Configure Compile & install the daemon

./configure --prefix=/usr --sysconfdir=/etc make make install

Create directories

mkdir -p /vservers/backups mkdir -p /vservers/userbackups mkdir -p /vservers/images

Edit the config file

Change "IP" to your own ip and "Ifaces" to the interface you want to measure traffic on

nano /etc/openvcpd.conf

Copy some images to your image directory usually "/vservers/images" (e.g.: http://www.openvcp.org/wiki/Downloads. ( These Images are just folders that contain a Linux system )

Start the daemon

openvcpd

Install openvcp web access with Lighttpd

Basic Installation

For installing the additional packages first activate community packages and update the package index

Install the required packages:

# apk add lighttpd php82 fcgi php82-cgi

Configure Lighttpd

Edit lighttpd.conf (/etc/lighttpd/lighttpd.conf) and uncomment the line:

Contents of /etc/lighttpd/lighttpd.conf

... include "mod_fastcgi.conf" ...

Edit mod_fastcgi.conf (/etc/lighttpd/mod_fastcgi.conf), find and change /usr/bin/php-cgi to /usr/bin/php-cgi82.

Contents of /etc/lighttpd/mod_fastcgi.conf

... "bin-path" => "/usr/bin/php-cgi82" # php-cgi ...

Start lighttpd service and add it to default runlevel

# rc-service lighttpd start # rc-update add lighttpd default

Install extra packages

apk add mysql mysql-client php-mysql php-mysqli php-gettext php-sockets

Configuring MySql

/usr/bin/mysql_install_db --user=mysql
/etc/init.d/mysql start && rc-update add mysql default
/usr/bin/mysqladmin -u root password 'password'

Create the openvcp database

Note: you can import the database from command line or from the openvcp web page later. 

mysql -u root -p

CREATE DATABASE openvcp;
GRANT ALL PRIVILEGES ON openvcp.* TO "root";
FLUSH PRIVILEGES;
EXIT

Installing openvcp web access

Make webapps folder 

mkdir /usr/share/webapps/ -p

Download 

cd /usr/share/webapps/
wget http://files.openvcp.org/openvcp-web-0.5rc3.tar.gz

Unpack and delete tar file 

tar zxvf openvcp-web-0.5rc3.tar.gz
rm openvcp-web-0.5rc3.tar.gz

Change Folder Persmissions 

chmod -R 777 /usr/share/webapps/openvcp/core/cache

Make symlinks to openvcp 

ln -s /usr/share/webapps/openvcp/ /var/www/localhost/htdocs/openvcp

Configuring openvcp web access

Browse to: http://WEBSERVER_IP_ADDRESS/openvcp/ and Install openvcp completing the information as appropriate from the web browser.

Openvcp Installation steps:

Welcome to the setup of OpenVCP

MySQL

  • host: localhost
  • dn: openvcp
  • user: root
  • Password: password
  • prefix: openvcp_

Other

  • location: /openvcp

relative to webroot

  • default locale: en_US
  • admin email: yourname@email.com

After set all click on "setup" to finish the installation.

Congratulations, you installed openvcp!

You have openvcp web access system working, to access go to http://WEBSERVER_IP_ADDRESS/openvcp/ user: Admin password: test

Retrieved from "https://wiki.alpinelinux.org/w/index.php?title=OpenVCP&oldid=8973"