Nginx as reverse proxy with acme (letsencrypt): Difference between revisions

From Alpine Linux
m (Added links; expression, style changes)
m (Replaced openssl with libressl)
Line 5: Line 5:
== Installation ==
== Installation ==


For this howto, we need three tools: [[NGINX]], {{pkg|acme-client}} and {{pkg|openssl}} (to generate [https://wiki.openssl.org/index.php/Diffie-Hellman_parameters Diffie–Hellman Parameters]).
For this howto, we need three tools: [[NGINX]], {{pkg|acme-client}} and {{pkg|libressl}} (to generate [https://wiki.openssl.org/index.php/Diffie-Hellman_parameters Diffie–Hellman Parameters]).


{{Cmd|apk add nginx acme-client openssl}}
{{Cmd|apk add nginx acme-client libressl}}


== Setup ==
== Setup ==

Revision as of 20:31, 8 December 2017

Introduction

This setup will allow you to have multiple servers/containers accessible via a single IP address with the added benefit of a centralized generation of letsencrypt certificates and secure https (according to ssllabs ssltest). Be aware that you first need to setup a regular HTTP server in order to be able to generate your HTTPS certificates and keys. After you have generated them, you can then add your HTTPS host based configuration.

Installation

For this howto, we need three tools: NGINX, acme-client and libressl (to generate Diffie–Hellman Parameters).

apk add nginx acme-client libressl

Setup

NGINX HTTP

Global configuration

First step is to refactor our global nginx.conf. Its target at a low traffic http server, to increase performance make changes at top level.

The security settings are taken from https://cipherli.st. Please also read https://hstspreload.org for details about HSTS.

# ngnix configuration file

user  nginx;

worker_processes  1; # use "auto" to use all available cores (high performance)

events {
    worker_connections  1024; # increase if you need more connections
}

http {
    # server_names_hash_bucket_size controls the maximum length
    # of a virtual host entry (ie the length of the domain name).
    server_names_hash_bucket_size   64;
    server_tokens                   off; # hide who we are
    sendfile                        off; # can cause issues

    # secure nginx according to https://cipherli.st/
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
    ssl_prefer_server_ciphers on;
    ssl_ciphers "EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH";
    ssl_ecdh_curve secp384r1; # Requires nginx >= 1.1.0
    ssl_session_cache shared:SSL:10m;
    ssl_session_tickets off; # Requires nginx >= 1.5.9
    ssl_stapling on; # Requires nginx >= 1.3.7
    ssl_stapling_verify on; # Requires nginx => 1.3.7
    resolver 8.8.8.8 8.8.4.4 valid=300s;
    resolver_timeout 5s;
    add_header Strict-Transport-Security "max-age=63072000"; # https://hstspreload.org
    add_header X-Frame-Options DENY;
    add_header X-Content-Type-Options nosniff;

    ssl_dhparam dhparam.pem;

    # nginx will find this file in the config directory set at nginx build time
    include mime.types;

    #fallback in case we can't determine a type
    default_type application/octet-stream;

    # buffering causes issues
    proxy_buffering off;

    # include hosts
    include conf.d/*.conf;
}

Diffie–Hellman Parameters

In the above configuration ssl_dhparam is used, so we need to generate a global dhparam file. We want to use a 4096 key size, but this can take a very long time. Because of this, we are adding an extra option (dsaparam) to generate our dhparam file (see this wiki section):

openssl dhparam -dsaparam -out /etc/nginx/dhparam.pem 4096

At this point, you should be able to (re)start your nginx server, but it will not use any of the security features yet.

Per site configuration files (conf.d)

Since Alpine v3.5, we ship NGINX with a default.conf within the /etc/nginx/conf.d directory.

To add support for another website, you can add files with the .conf extension to this directory:

Contents of /etc/nginx/conf.d/alpinelinux.org.conf

server { listen 80; server_name alpinelinux.org; location / { include conf.d/proxy_set_header.inc; proxy_pass http://downstream_http_server_host; } }

Common configuration includes

If you need to setup multiple proxy setups, you can include duplicated data such as shown below:

/etc/nginx/conf.d/proxy_set_header.inc:
proxy_set_header    X-Forwarded-By       $server_addr:$server_port;
proxy_set_header    X-Forwarded-For      $remote_addr;
proxy_set_header    X-Forwarded-Proto    $scheme;
proxy_set_header    Host                 $host;

acme-client

To allow NGINX to support https, we need to add certificates and support for ACME (Automatic Certificate Management Environment) responses.

ACME responses

/etc/nginx/conf.d/acme.inc:
location /.well-known/acme-challenge {
    alias /var/www/acme;
}

And add this to your proxy configuration:

/etc/nginx/conf.d/alpinelinux.org.conf
server {
    listen        80;
    server_name   alpinelinux.org;
    include       conf.d/acme.inc;

    location / {
        include			conf.d/proxy_set_header.inc;
        proxy_pass		http://downstream_http_server_host;
    }
}

Automatic generation of certificates

Create the following file:

Contents of /etc/periodic/weekly/acme-client

#!/bin/sh hosts="alpinelinux.org" for host in $hosts; do acme-client -a https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf -Nnmv $host && renew=1 done [ "$renew" = 1 ] && rc-service nginx reload

Make it executable:

chmod +x /etc/periodic/weekly/acme-client

This script will run weekly to verify whether one of your certificates is outdated and renew them when needed.

If you have several domains, you can add them to the hosts= variable with a space between each domain. This will create a separate certificate and key for each:

hosts="alpinelinux.org example.com foo.org bar.io"

Initial generation of keys and certificates

To create your initial certificates and keys, you have to run this manually the first time:

/etc/periodic/weekly/acme-client

Watch the output and see if all goes well. When it's finished, you should have files in:

/etc/ssl/acme/alpinelinux.nl/fullchain.pem
/etc/ssl/acme/private/alpinelinux.org/privkey.pem

NGINX HTTPS

Per site HTTPS configuration

Add the following below the previous HTTP configuration:

/etc/nginx/conf.d/alpinelinux.org.conf
server {
    listen                  443 ssl;
    server_name             alpinelinux.org
    ssl                     on;
    ssl_certificate         /etc/ssl/acme/alpinelinux.org/fullchain.pem;
    ssl_certificate_key     /etc/ssl/acme/private/alpinelinux.org/privkey.pem;

    location / {
        include     conf.d/proxy_set_header.inc;
        proxy_pass  http://downstream_http_server_host;
    }
}

Redirect HTTP to HTTPS

Shared configuration

Create the following file:

Contents of /etc/nginx/conf.d/redirect_http.inc

location / { return 301 https://$host$request_uri; }

Update host configuration

/etc/nginx/conf.d/alpinelinux.org.conf
server {
    listen        80;
    server_name   alpinelinux.org;
    include       conf.d/acme.inc;
    include       conf.d/redirect_http.inc;
}

Complete host example with IPv6 support

/etc/nginx/conf.d/alpinelinux.org.conf
# alpinelinux.org

server {
    listen                  80;
    listen                  [::]:80;
    server_name             alpinelinux.org;
    include                 conf.d/acme.inc;
    include                 conf.d/redirect_http.inc;
}

server {
    listen                  443 ssl;
    listen                  [::]:443 ssl;
    server_name             alpinelinux.org;
    ssl                     on;
    ssl_certificate         /etc/ssl/acme/alpinelinux.org/fullchain.pem;
    ssl_certificate_key     /etc/ssl/acme/private/alpinelinux.org/privkey.pem;

    location / {
        include     conf.d/proxy_set_header.inc;
        proxy_pass  http://downstream_http_server_host;
    }
}