Native Harddisk Install 1.9: Difference between revisions

From Alpine Linux
(updated for 1.9)
(Removed REDIRECT)
Line 1: Line 1:
#REDIRECT [[Native Harddisk Install 1.6]]
=Install Alpine on Harddisk=
=Install Alpine on Harddisk=
'''NOTE''': This document covers 1.9.x release.
'''NOTE''': This document covers 1.9.x release.

Revision as of 04:36, 20 October 2012

Install Alpine on Harddisk

NOTE: This document covers 1.9.x release. For 1.8.x and older please see Native Harddisk Install 1.6


Installation

Run setup-alpine to configure the keyboard, hostname and networking.

Create partitions with fdisk.

fdisk /dev/sda

You should have 2 partitions: /dev/sda1 as "Linux" (type 83) and /dev/sda2 as "linux swap" (type 82). The /dev/sda1 should be bootable.

Install needed programs for the setup

apk_add e2fsprogs syslinux mkinitfs

Create filesystem and swap

mkfs.ext3 /dev/sda1
mkswap /dev/sda2

Mount file-system

mount -t ext3 /dev/sda1 /mnt

Clone the current running config created by setup-alpine (hostname, networking root password)

lbu package - | tar -C /mnt -zx

Install base packages on harddisk

apk add --root=/mnt --initdb apk-tools alpine-baselayout alpine-conf linux-grsec linux-grsec-mod acct mkinitfs

Generate new initramfs image:

chroot /mnt /sbin/mkinitfs

Create the repositories list. In this example we use the cdrom as repository:

mkdir -p /mnt/etc/apk
echo "/media/cdrom/packages/core" >> /mnt/etc/apk/repositories
echo "/media/cdrom/packages/extra" >> /mnt/etc/apk/repositories

Append the / and swap to fstab:

echo -e "/dev/sda1 /    ext3  defaults 1 1" >> /mnt/etc/fstab
echo -e "/dev/sda2 none swap  sw       0 0" >> /mnt/etc/fstab

Configure the boot loader, extlinux. We use sthe provided syslinux as base.

cp /media/cdrom/syslinux.cf /mnt/boot/extlinux.conf
vi /mnt/boot/extlinux.conf

It should contain something like:

timeout 20
prompt 1
default grsec
label grsec
    kernel /boot/grsec
    append initrd=/boot/grsec.gz root=/dev/sda1 modules=ext3 quiet

Install the bootloader:

extlinux -i /mnt/boot

Fix the MBR so its bootable (note that its sda and not sda1)

dd if=/usr/share/syslinux/mbr.bin of=/dev/sda

Unmount, remove cdrom and reboot. (If you can't eject, just remove it manually as the machine reboots)

umount /mnt
umount /.modloop
eject 
reboot

After reboot, you should be able to log in as roto with the password you created in setup-alpine.