Lighttpd Advanced security: Difference between revisions

From Alpine Linux
m (Mckaygerhard moved page Lighttpd Https access to Lighttpd Advanced security: merged with security lighttpd and httpds)
(No difference)

Revision as of 17:36, 26 August 2019

For higher security Lighttpd can be configured to allow https access.

Generate Certificate and Keys

Either generate the public key and certificate and private key using openssl, or by using the ones generated by installing ACF. You don't need to do both, just do one or the other. The former method, with OpenSSL, is preferred since it gives greater control.

Generate self-signed certificates with openssl

To generate certificates, openssl is needed.

apk add openssl

Change to the lighttpd configuration directory

cd /etc/lighttpd

With the command below the self-signed certificate and key pair are generated. A 2048 bit key is the minimum recommended at the time of writing, so we use '-newkey rsa:2048' in the command. Change to suit your needs. Answer all questions.

openssl req -newkey rsa:2048 -x509 -keyout server.pem -out server.pem -days 365 -nodes

Adjust the permissions

chmod 400 /etc/lighttpd/server.pem

Generate self-signed certificates with acf

Install the ACF

setup-acf

Copy the generated certificate to the lighttpd configuration directory.

mv /etc/ssl/mini_httpd/server.pem /etc/lighttpd/server.pem

Adjust the permissions

chown root:root /etc/lighttpd/server.pem

chmod 400 /etc/lighttpd/server.pem

mini_http is no longer needed.

/etc/init.d/mini_httpd stop && rc-update del mini_httpd

Removing the mini_http package

apk del mini_httpd

Configure Lighttpd

The configuration of lighttpd needs to be modified.

nano /etc/lighttpd/lighttpd.conf

Uncomment this section and adjust the path so 'ssl.pemfile' points to where our cert/key pair is stored. Or copy the example below into your configuration file if you saved it to /etc/lighttpd/server.pem.

ssl.engine    = "enable"
ssl.pemfile   = "/etc/lighttpd/server.pem"

You'll also want to set the server to listen on port 443. Replace this:

server.port		= 80

with this:

server.port		= 443

Restart lighttpd

rc-service lighttpd restart

Security

BEAST attack, CVE-2011-3389

To help mitigate the BEAST attack add the following to your configuration:

#### Mitigate BEAST attack:

# A stricter base cipher suite. For details see:
# http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-3389
# or
# http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3389

ssl.cipher-list = "ECDHE-RSA-AES256-SHA384:AES256-SHA256:RC4-SHA:RC4:HIGH:!MD5:!aNULL:!EDH:!AESGCM"
#
# Make the server prefer the order of the server side cipher suite instead of the client suite.
# This is necessary to mitigate the BEAST attack (unless you disable all non RC4 algorithms).
# This option is enabled by default, but only used if ssl.cipher-list is set.
ssl.honor-cipher-order = "enable"

# Mitigate CVE-2009-3555 by disabling client triggered renegotiation
# This option is enabled by default.
#
ssl.disable-client-renegotiation = "enable"
#


Perfect Forward Secrecy (PFS)

Perfect Forward Secrecy isn't perfect, but what it does mean is that an adversary who gains the private key of a server does not have the ability to decrypt every encrypted SSL/TLS session. Without it, an adversary can simply obtain the private key of a server and decrypt and and all SSL/TLS sessions using that key. This is a major security and privacy concern and so using PFS is probably a good idea long term. It means that every session would have to be decrypted individually, regardless of the state (whether obtained by the adversary or otherwise).

Ultimately when choosing SSL/TLS ciphers it is the usual chose of security or usability? Increasing one usually decreases the other. Nonetheless, an example to prevent the BEAST attack and offer PFS is:

ssl.cipher-list = "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256"

POODLE attack (CVE-2014-3566)

In light of the recent POODLE findings, it's advisable to wherever possible turn off support for SSLv3. This is quite simple, you can just append the following to your cipher list to explicitly disable SSLv3 support:

:!SSLv3


FREAK attack (CVE-2015-0204)

To prevent the so called FREAK attack, keep your SSL library up to date, and do not offer support for export grade ciphers.

There's multiple ways to do this, like turning off export cipher support in the cipher list:

:!EXPORT

Although now might be a good time to review the cipher list in use, and use a stronger, explicit set like the one from the Perfect Forward Secrecy section, or another example:

ssl.cipher-list = "ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!3DES:!MD5:!PSK"

Also see https://freakattack.com/

Other configurations

The following are example configs, they will likely need to be modified to suite your particular setup. Nonetheless they should provide an indication of how to implement the relevant configuration options.

redirecting HTTP to HTTPS

Any requests to the server via HTTP (TCP port 80 by default) will be redirected to HTTPS (port 443):

server.port		= 80
server.username		= "lighttpd"
server.groupname	= "lighttpd"
server.document-root	= "/var/www/localhost/htdocs"
server.errorlog		= "/var/log/lighttpd/error.log"
dir-listing.activate	= "enable"
index-file.names	= ( "index.html" )
mimetype.assign		= ( ".html" => "text/html", ".txt" => "text/plain", ".jpg" => "image/jpeg", ".png" => "image/png", "" => "application/octet-stream" )

## Ensure mod_redirect is enabled!
server.modules              = (
                                "mod_redirect",                                    
)

$SERVER["socket"] == ":80" {
  $HTTP["host"] =~ "(.*)" {
    url.redirect = ( "^/(.*)" => "https://%1/$1" )
  }
}

$SERVER["socket"] == ":443" {
    ssl.engine                  = "enable" 
    ssl.pemfile                 = "/etc/lighttpd/certs/www.example.com.pem" 
## Make sure the line above points to your SSL cert/key pair!
 }

Serving both HTTP and HTTPS requests

Simple, just add in the SSL server port, enable the SSL engine and point to the relevant SSL cert/key pair:


server.port		= 80
server.username		= "lighttpd"
server.groupname	= "lighttpd"
server.document-root	= "/var/www/localhost/htdocs"
server.errorlog		= "/var/log/lighttpd/error.log"
dir-listing.activate	= "enable"
index-file.names	= ( "index.html" )
mimetype.assign		= ( ".html" => "text/html", ".txt" => "text/plain", ".jpg" => "image/jpeg", ".png" => "image/png", "" => "application/octet-stream" )

## Below is HTTPS setup. Make sure to point at relevant cert/key pair for HTTPS to work!
$SERVER["socket"] == ":443" {
    ssl.engine                  = "enable" 
    ssl.pemfile                 = "/etc/lighttpd/certs/www.example.com.pem" 
 }


More details