Kernels: Difference between revisions

From Alpine Linux
(replace -vanilla with -lts)
(fix link to -virt config)
Line 2: Line 2:


* [//git.alpinelinux.org/aports/tree/main/linux-lts linux-lts] is the stock modular kernel and is configured for a generous selection of hardware.
* [//git.alpinelinux.org/aports/tree/main/linux-lts linux-lts] is the stock modular kernel and is configured for a generous selection of hardware.
* linux-virt ([//git.alpinelinux.org/aports/tree/main/linux-vanilla linux-vanilla], see the -virt configs) is recommended for Alpine Linux guests, and disables most hardware in favor of a commonly-virtualized subset of drivers.
* linux-virt ([//git.alpinelinux.org/aports/tree/main/linux-lts linux-lts], see the -virt configs) is recommended for Alpine Linux guests, and disables most hardware in favor of a commonly-virtualized subset of drivers.
* [//git.alpinelinux.org/aports/tree/main/linux-rpi linux-rpi] is optimized for the Raspberry Pi.
* [//git.alpinelinux.org/aports/tree/main/linux-rpi linux-rpi] is optimized for the Raspberry Pi.



Revision as of 20:10, 24 March 2020

Alpine Linux has several kernels designed to suit different situations.

  • linux-lts is the stock modular kernel and is configured for a generous selection of hardware.
  • linux-virt (linux-lts, see the -virt configs) is recommended for Alpine Linux guests, and disables most hardware in favor of a commonly-virtualized subset of drivers.
  • linux-rpi is optimized for the Raspberry Pi.

For installing a custom kernel, see Custom Kernel. To select a specific kernel or firmware packages during installation from the Alpine ISO, simply install the desired kernel flavor and firmware packages with apk add before running setup-alpine.

Firmware

The linux-firmware meta-package is included in the default installation, and depends on all firmware. This is a large download, and you may be better served by installing only the firmwares you need, or linux-firmware-none if you do not require any firmware. If you're unsure which firmware you need, boot up with no firmware installed and run dmesg | grep firmware to get an idea. Be aware that most firmware is nonfree.