Revision as of 14:53, 29 July 2020

Alpine Linux can be installed as the main operating system on a physical machine ("bare metal"), including on embedded devices. For example, PostmarketOS is a smartphone operating system based on Alpine, and Adélie Linux is a complete end-user distribution based on Alpine Linux. While this use case is less common than Alpine Linux's main use as a base system for container images in systems like Docker, this document describes how Alpine can be installed as the primary operating system for a computer.

Alpine in fact works as a live system—any install disk of Alpine can also be run without installing to local storage of the machine it's booted on, running directly from the install media!

Quick Requirements

Nearly any hardware should run Alpine Linux but the following basic requirements are recommended:

At least 128MB of RAM for server without GUI, or at least 1.6GB for graphical desktop
At least 1GB storage device for server without GUI, or at least 10GB for graphical desktop with web browsing

For more information, see Requirements.

Installation : setup-alpine : booting process until login prompt

Installation Overview

The following steps are brief and intended for the common case; for complete info and other architectures, please consult the Alpine newbie install manual.

1. Download the media source

The most common is to grab an ISO from [1]. Take note of architectures in green buttons.

2. Dump, burn or flash the image

Dump the ISO image onto a media source like USB/SD flashing; or CD/DVD/BR disk with burning software. In Linux, you can use dd if=<your iso filename> of=<your target media> bs=1M; sync, to flash a USB drive or SD card as target media install.

3. Boot and install process

Log in as the user root by typing root and hitting enter. Then execute setup-alpine, answering the questions and hitting enter after each:

Installation : setup-alpine : complete process single install

Select keyboard layout: Choose your keyboard layout, e.g. us or es.
- Select variant: Choose your keyboard layout variant, e.g. us-nodeadkeys or es-winkeys.
Enter system hostname: Choose the name of your computer; localhost is good enough and recommended for starting.
Initialize network cards: Here most people can just go with the default (just press enter).
- Any manual configuration: Perform other configuration if needed, otherwise just type "no" and hit enter.
- Select domain name: This is not commonly asked, you can just hit enter.
DNS nameservers?: If asked, 8.8.8.8 is a recommended default that will be good for most people.
Changing password for root: Next a root password must be defined. Input a passphrase; what you type won't be shown on the screen.
- Retype password: Type the same passphrase to confirm the root password; what you type won't be shown on the screen.
Which timezone to choose?: Set it to your local time zone or hit enter for UTC.
Proxy chooser: Type none and hit enter if you're not using a proxy.
Which NTP client to run?: This is for keeping the system clock in sync. The default is good enough for most people.
Enter mirror number: 1 is a good choice for most people.
Which SSH server?: An SSH server allows you to remotely manage your machine. The default is good enough for most people.
Disk Setup Choose how to set up your disks.
- Which disks would you like to use?: Choose the disk where files will be installed. Usually sda is the hard disk and sdb is the USB boot or CD/DVD image.
- How would you like to use it?: Type "sys" and then press enter. This will cause the OS to be installed to the chosen disk—similar to how other distributions work.

Take care that all data on your chosen disk will be erased. A final question will prompt you to continue. After confirming by typing 'y' and hitting enter, you cannot turn back.

After the script finishes installing the system, it will tell you to reboot. Note that:

If the configured runtime mode was "sys", then remove the initial installation media to boot the newly installed system.
If the configured runtime mode was "data", then keep the installation media inserted to boot the newly installed system.

To reboot, type reboot and hit enter. If you just wish to turn off the machine after installing, type poweroff instead.

Further Documentation

The installation script only installs the base operating system. Applications such as a web server, mail server, desktop environment, or web browser are not installed and root is the only normal user. For instructions on proceeding after installation, please see Tutorials_and_Howtos Post-Install section.

More specific instructions and instructions for other architectures or machines (e.g. ARM, RPi, etc) are defined in Installation:_Use_cases. Also see the following wiki pages for more information:

@@ Line 1: / Line 1: @@
-Alpine Linux are already installed in your media dumped, it means downloadble media files of Alpine Linux are already the system ready to use directly from the media where are dumped! [[Image:hdd_mount.png|right|link=]]
+Alpine Linux can be installed as the main operating system on a physical machine ("bare metal"), including on embedded devices. For example, [https://en.wikipedia.org/wiki/PostmarketOS PostmarketOS] is a smartphone operating system based on Alpine, and [https://www.adelielinux.org/ Adélie Linux] is a complete end-user distribution based on Alpine Linux. While this use case is less common than Alpine Linux's main use as a base system for container images in systems like Docker, this document describes how Alpine can be installed as the primary operating system for a computer.
+Alpine in fact works as a [https://en.wikipedia.org/wiki/Live_USB live system]&mdash;any install disk of Alpine can also be run without installing to local storage of the machine it's booted on, running directly from the install media!
 __TOC__
 __FORCETOC__
@@ Line 5: / Line 8: @@
 = Quick Requirements =
-This is a simple and quick reference list, nowadays any hardware is supported for Alpine Linux:
+Nearly any hardware should run Alpine Linux but the following basic requirements are recommended:
+* At least 128MB of RAM for server without GUI, or at least 1.6GB for graphical desktop
+* At least 1GB storage device for server without GUI, or at least 10GB for graphical desktop with web browsing
-* At least 128 MEgs of RAM for server without graphical GUI, or at least 1.6 Gigs for graphical desktop
+For more information, see [[Requirements]].
-* At least 2 Gigs storage device for server without graphical GUI, or at least 20 Gigs for graphical desktop with web browsing
-Highly '''recommended for more details or if you do not have great knowledge must to read [[Requirements|wiki page for requirements]]''': [[Requirements]]!
+[[File:Installation-alpine-alpine-setup-2-boot.png|350px|thumb|right|Installation : setup-alpine : booting process until login prompt]]
 = Installation Overview =
-It must be clear that alpine linux each image source media (whatever you download).. is the system already executable and ready to use, and what is understood as "installing" in reality is to be able to have the installation root on another storage media and make it bootable by the device that handles it.
+The following steps are brief and intended for the common case; for complete info and other architectures, please consult the [[Alpine newbie install manual]].
-== Download the media source ==
-'''Just grab from [http://alpinelinux.org/downloads stable-release ISO image]''', for your computer's architecture, '''use the "architecture" name in each green button''' of download page.
-Most common case just download '''x86''' or '''x86_64''' types.. for further information check [[Requirements#Architectures|Architectures section]] and then [[Requirements#Media|Media Downloadable section]] of requirements wiki page.
-Optionally you can perform a ''sha256'' checksum as described in [[Requirements#Checksum|Checksum section of Requirements]] wiki page but is not necessary in general cases.
-== Dump, burn or flash the image ==
+== 1. Download the media source ==
-Depending of your hardware, now can '''dump the ISO image onto a media source like USB/SD flashing; or CD/DVD/BR disk with burning''' software.
+The most common is to grab an ISO from [http://alpinelinux.org/downloads]. Take note of architectures in green buttons.
-But you could check [[Alpine_newbie_install_manual#Ways_to_install_Alpine_listed_by_architectures|Ways_to_install_Alpine_listed_by_architectures]] wiki page if you have special cases like ARM or s390 machines.
+== 2. Dump, burn or flash the image ==
-== Boot and install process ==
+Dump the ISO image onto a media source like USB/SD flashing; or CD/DVD/BR disk with burning software.
+In Linux, you can use <code><nowiki>dd if=<your iso filename> of=<your target media> bs=1M; sync</nowiki></code>, to flash a USB drive or SD card as target media install.
-The boot process first copies the entire system into the RAM memory, and then runs it completely from RAM, so that the started command line environment does not depend on reading from the (slow) initial boot media anymore.
+== 3. Boot and install process ==
-'''Log-in as the user <code>root</code> with its initially empty password'''. So there's no need to ask for password at first boot.
+Log in as the user <code>root</code> by typing <code>root</code> and hitting ''enter''. Then execute <code>[[Alpine_setup_scripts#setup-alpine|setup-alpine]]</code>, answering the questions and hitting ''enter'' after each:
-'''Then execute the script called <code>[[Alpine_setup_scripts#setup-alpine|setup-alpine]]</code>''', can be used to configure the initial Alpine Linux system, next section will explain each question.
+[[File:Installation-alpine-alpine-setup-3-setup-scripts.png|350px|thumb|right|Installation : setup-alpine : complete process single install]]
-=== <code>setup-alpine</code> install program ===
+* '''Select keyboard layout''': Choose your keyboard layout, e.g. ''us'' or ''es''.
+** '''Select variant''': Choose your keyboard layout variant,  e.g. ''us-nodeadkeys'' or ''es-winkeys''.
+* '''Enter system hostname''': Choose the name of your computer; '''localhost''' is good enough and recommended for starting.
+* '''Initialize network cards''': Here most people can just go with the default (just press enter).
+** '''Any manual configuration''': Perform other configuration if needed, otherwise just type "no" and hit enter.
+** '''Select domain name''': This is not commonly asked, you can just hit enter.
+* '''DNS nameservers?''': If asked, <code>8.8.8.8</code> is a recommended default that will be good for most people.
+* '''Changing password for root''': Next a root password must be defined. Input a passphrase; what you type won't be shown on the screen.
+** '''Retype password''': Type the same passphrase to confirm the root password; what you type won't be shown on the screen.
+* '''Which timezone to choose?''': Set it to your local time zone or hit enter for <code>UTC</code>.
+* '''Proxy chooser''': Type <code>none</code> and hit enter if you're not using a proxy.
+* '''Which NTP client to run?''': This is for keeping the system clock in sync. The default is good enough for most people.
+* '''Enter mirror number''': <code>1</code> is a good choice for most people.
+* '''Which SSH server?''': An SSH server allows you to remotely manage your machine. The default is good enough for most people.
+* '''Disk Setup''' Choose how to set up your disks.
+** '''Which disks would you like to use?''': Choose the disk where files will be installed. Usually <code>sda</code> is the hard disk and <code>sdb</code> is the USB boot or CD/DVD image.
+** '''How would you like to use it?''': Type "sys" and then press enter. This will cause the OS to be installed to the chosen disk&mdash;similar to how other distributions work.
-The <code>[[setup-alpine]]</code> script offers to configure, here you can perform that questions and hit ''enter'' on each answer:
+Take care that '''all data on your chosen disk will be erased'''. A final question will prompt you to continue. After confirming by typing 'y' and hitting enter, you cannot turn back.
-* '''1. Keyboard map''': Let you to perform the keyborad layout, this is really two cuestions:
+After the script finishes installing the system, it will tell you to reboot. Note that:
-** The first ante the general map: e.g. ''us'' or ''es''
-** And second the variant of e.g. ''us-nodeadkeys'' or ''es-winkeys'' respectively
-* '''2. Hostname''' this is the name of computer, mostly knowed as the human name, in Linux this are default to "localhost" if not configured.
-* '''3 Network''' (e.g. automatic DHCP IP address discovery)
-* DNS Servers
-* Timezone
-* Proxy ("None" for direct connections to the internet.)
-* SSH (Openssh is part of the default images.)
-* NTP (Chrony is part of the default images.)
-* Runtime Mode (Select between "diskless" (disk=none), "data" or "sys")
+* If the configured [[Alpine_setup_scripts#sys_mode|runtime mode was "sys"]], then remove the initial installation media to boot the newly installed system.
+* If the configured [[Alpine_setup_scripts#diskless_mode|runtime mode was "data"]], then keep the installation media inserted to boot the newly installed system.
-WIP
+To reboot, type <code>reboot</code> and hit enter. If you just wish to turn off the machine after installing, type <code>poweroff</code> instead.
-== Additional Details ==
-However... as mentioned, even though it is not installed on your device it is working as if it were, all the [[Alpine_setup_scripts|setup-scripts]] inclusively the [[Alpine_Linux_package_management|apk package manager]] are available to direct use, and all the general command line tools of course to install further packages. All of this are from the media you boot, this mode is called "diskless mode", for further information check [[Alpine_setup_scripts#Setup_modes|Setup_modes section]] for "alpine running modes".
-{{Box GREEN|'''CLARIFICATIONS about media sources:'''|What is understood as "installing" in reality is to be able to have this installation root on another storage media and make it bootable by the device that handles it. '''All the media Alpine images are already Alpine running live systems, check '''}}
 = Further Documentation =
-=== Installing ===
+The installation script only installs the base operating system. Applications such as a web server, mail server, desktop environment, or web browser are not installed and <code>root</code> is the only normal user. For instructions on proceeding after installation, please see [[Tutorials_and_Howtos#Post-Install|Tutorials_and_Howtos Post-Install section]].
-* [[Directly booting an ISO file]] ''(without flashing it to a disk or device)''
-* [[Tutorials_and_Howtos#Networking|Setting up Networking]] ''(incl. non-standard configurations)''
+More specific instructions and instructions for other architectures or machines (e.g. ARM, RPi, etc) are defined in [[Tutorials_and_Howtos#Installation:_Use_cases|Installation:_Use_cases]]. Also see the following wiki pages for more information:
-=== Post-Install ===
-<!-- If you edit post-install, also consider [[Tutorials_and_Howtos#Post-Install]], [[Developer_Documentation#Package_management]] and the Handbook. These are not exact duplicates. -->
-* [[Setting up a new user]]
-* [[Enable Community Repository]] ''(Providing additional packages)''
-* [[Alpine Linux package management|Package Management (apk)]] ''(general search/add/del packages etc.)''
-* [[Alpine setup scripts#setup-xorg-base|<code>setup-xorg-base</code>]] ''(display graphics, if required)''
-** [[Xfce_Setup]] / [[Desktop-notes]] / [[Xfce_Desktop]]
-* [[Alpine_local_backup|Local backup utility <code>lbu</code>]] ''(persisting RAM system configurations)''
-** [[Back Up a Flash Memory Installation]] ''("diskless mode" systems)''
-** [[Manually_editing_a_existing_apkovl]] ''(the stored custom configs)''
-* [[Alpine Linux Init System|Init System (OpenRC)]] ''(Configure a service to automatically boot at next reboot)''
-** [[Multiple Instances of Services]]
-** [[Writing Init Scripts]]
-* [[Hosting services on Alpine]] ''(Links to several mail/web/ssh server setup pages)''
-* Runnig programs and services in their own [[Firejail Security Sandbox]]
-* [[Alpine_Linux_package_management#Upgrade_a_Running_System|Upgrading Alpine]] ''(checking for and installing updates)''
-* [[How_to_make_a_custom_ISO_image_with_mkimage]]
-=== Further Help and Information ===
-* [[Running glibc programs]] ''(Installation and development)''
-<!-- * [[setup-acf]] ''(Configures ACF (webconfiguration) so you can manage your box through https)''
-* [[Changing passwords for ACF|Changing passwords]]
--->
 * [[FAQ|FAQs]]
 * [[Tutorials and Howtos]]
 * [[Contribute|How to Contribute]]
 * [[Developer Documentation]]
-* [[Alpine_Linux:Wiki_etiquette|Wiki etiquette]] ''to collaborate on this documentation''
+* [[Newbie Alpine Ecosystem]]
+* [https://mckayemu.github.io/alpineinstalls/ https://mckayemu.github.io/alpineinstalls/ All informatin for Spanish users]
-{{Tip| Alpine linux packages stay close to the upstream design. Therefore, all upstream documentation about configuring a software package, as well as good configuration guides from other distributions that stay close to upstream, like e.g. in the [https://wiki.archlinux.org/ Arch Wiki], are to a large degree also well applicable to configure the software on alpine linux, thus can be very useful.}}
-= See Also =
-There may still be something useful to find and sort out of the newbie's install notes in this wiki, moving godd things into the structured handbook style documentation.
-# [[Newbie_Alpine_Ecosystem]]
-# [[Alpine newbie install manual]]
-# [[Alpine_newbie#Install|Alpine_newbie Install section]]
-# [https://mckayemu.github.io/alpineinstalls/ https://mckayemu.github.io/alpineinstalls/ All informatin for Spanish users]
 [[Category:Installation]]