Install to disk: Difference between revisions

From Alpine Linux
mNo edit summary
Line 32: Line 32:
Install base packages on harddisk
Install base packages on harddisk


{{Cmd|<nowiki>apk add --root=/mnt --initdb apk-tools alpine-baselayout alpine-conf linux-grsec busybox-initscripts acct</nowiki>}}
{{Cmd|<nowiki>apk add --root=/mnt --initdb $(cat /etc/apk/world)</nowiki>}}


Create the repositories list. In this example we use the cdrom as repository:
Create the repositories list. In this example we use the cdrom as repository:

Revision as of 19:22, 30 August 2011

Note: This document covers 2.x.x release.

For 1.8.x and older please see Native Harddisk Install 1.6

Installation

Run setup-alpine to configure the keyboard, hostname and networking.

setup-alpine

Create partitions with fdisk.

fdisk /dev/sda

You should have 2 partitions: /dev/sda1 as "Linux" (type 83) and /dev/sda2 as "linux swap" (type 82). The /dev/sda1 must be bootable (command "a" within fdisk).

Install needed programs for the setup

apk add e2fsprogs syslinux mkinitfs

Create filesystem and swap

mkfs.ext4 /dev/sda1 mkswap /dev/sda2

Mount file-system

mount -t ext4 /dev/sda1 /mnt

Clone the current running config created by setup-alpine (hostname, networking root password)

lbu package - | tar -C /mnt -zx

Install base packages on harddisk

apk add --root=/mnt --initdb $(cat /etc/apk/world)

Create the repositories list. In this example we use the cdrom as repository:

mkdir -p /mnt/etc/apk echo "/media/cdrom/packages/core" >> /mnt/etc/apk/repositories echo "/media/cdrom/packages/extra" >> /mnt/etc/apk/repositories

Append the / and swap to fstab:

echo -e "/dev/sda1 / ext4 defaults 1 1" >> /mnt/etc/fstab echo -e "/dev/sda2 none swap sw 0 0" >> /mnt/etc/fstab

Configure the boot loader, extlinux. We use the provided syslinux as base.

cp /media/cdrom/syslinux.cf /mnt/boot/extlinux.conf vi /mnt/boot/extlinux.conf

It should contain something like:

timeout 20
prompt 1
default grsec
label grsec
    kernel /boot/grsec
    append initrd=/boot/grsec.gz root=/dev/sda1 modules=ext4 quiet

Install the bootloader:

extlinux -i /mnt/boot

Install syslinux bootloader at the beginning of the MBR so its bootable (note that its sda and not sda1)

dd if=/usr/share/syslinux/mbr.bin of=/dev/sda

Unmount, remove cdrom, and reboot. (If you can't eject, just remove it manually as the machine reboots)

umount /mnt umount /.modloop eject reboot

After reboot, you should be able to log in as root with the password you created in setup-alpine.