Create a Bootable Device

From Alpine Linux
Revision as of 09:46, 16 November 2011 by Ttrask (talk | contribs) (Remove redundant steps now included in 'Copying Alpine to Flash', added syslinux waitusb option)

Installing Alpine on a USB Stick - Automated Process

Requirements

To put Alpine on a USB drive, you will need:

  • An Alpine Linux ISO image file (Download)
  • A partitioned and formatted USB drive
  • UNetbootin
Note: UNetbootin is available for many distributions and Windows.

Process

After the launch of UNetbootin, click the Diskimage radio button, and then the ... button to select the Alpine ISO image.

size=400

When you selected your USB device under Device and press OK' to proceed. When UNetbootin is done, your USB drive is ready to use.

Installing Alpine on a USB Stick - Manual Process

This process applies to Alpine Linux 1.9.0 or later, and results in a run-from-ram style installation.

Requirements

In order to follow this document, you will need:

  • Alpine Linux CD-ROM (Download a .iso file containing an Alpine release.)
  • A USB drive (flash, external HD, card reader, etc.)
This material is proposed for deletion ...

This redirect is to an include that is obsolete and is completely unused on the wiki (Discuss)
Make sure no other pages link here and check the page's history before deleting.

Slow USB Devices

Specifying the 'waitusb=X' option at the end of the syslinux.cfg line might help with certain USB devices that take a bit longer to register. X stands for the amount of seconds kernel will wait before looking for the installation media.

append initrd=/boot/grsec.gz alpine_dev=usbdisk:vfat modules=loop,cramfs,sd-mod,usb-storage quiet waitusb=3

Alpine Linux has some special applications that helps you to use it in the way you want.
Some of the first scripts you are suggested to use is:

  • setup-alpine (Configures all basic things on your Alpine Linux)
  • setup-acf (was named setup-webconf before Alpine 1.9 beta 4) (Configures ACF (webconfiguration) so you can manage your box through https)
Note: Just type any of the above commands on your console and hit Enter to execute the script.

Other useful pages