Create a Bootable Device: Difference between revisions

From Alpine Linux
Line 17: Line 17:


When you selected your USB device under '''Device'' and press '''OK''' to proceed. When UNetbootin is done, your USB drive is ready to use.
When you selected your USB device under '''Device'' and press '''OK''' to proceed. When UNetbootin is done, your USB drive is ready to use.
{{Note| When you boot off the USB stick for the first time, if you get the error:
/boot/syslinux/mboot.c32: not a COM32R image
you will need to copy the mboot.c32 file suppled by your distro into /boot/syslinux/ on the USB stick
}}


== Creating a bootable Alpine Linux USB Stick from the command line ==
== Creating a bootable Alpine Linux USB Stick from the command line ==

Revision as of 08:25, 17 October 2014

Creating a bootable Alpine Linux USB Stick with UNetbootin

UNetbootin is a graphical tool that allows you to create bootable Live USB drives for Ubuntu, Fedora, and other Linux distributions without burning a CD. UNetbootin is available for many distributions and Windows. This process applies to all versions of Alpine Linux, and results in a run-from-ram style installation.

Requirements

To create a bootable Alpine Linux USB drive, you will need:

  • An Alpine Linux ISO image file (Download)
  • A partitioned and formatted USB drive
  • UNetbootin

Process

After the launch of UNetbootin, click the Diskimage radio button, and then the ... button to select the Alpine ISO image.

size=400

When you selected your USB device under Device and press OK' to proceed. When UNetbootin is done, your USB drive is ready to use.

Note: When you boot off the USB stick for the first time, if you get the error:

/boot/syslinux/mboot.c32: not a COM32R image

you will need to copy the mboot.c32 file suppled by your distro into /boot/syslinux/ on the USB stick

Creating a bootable Alpine Linux USB Stick from the command line

This process applies to Alpine Linux 1.9.0 or later, and results in a run-from-ram style installation.

Warning: This process can potentially totally or partly erase the contents of your hard drive. For this reason, it is recommended to do this procedure using VirtualBox rather than your own computer.


Requirements

In order to follow this document, you will need:

  • Alpine Linux CD-ROM (Download a .iso file containing an Alpine release.)
  • A USB drive (flash, external HD, card reader, etc.)
This material is proposed for deletion ...

This include has become obsolete. It is completely unused on the wiki (Discuss)
Make sure no other pages link here and check the page's history before deleting.

Slow USB Devices

Specifying the 'waitusb=X' option at the end of the syslinux.cfg line might help with certain USB devices that take a bit longer to register. X stands for the amount of seconds kernel will wait before looking for the installation media.

append initrd=/boot/grsec.gz alpine_dev=usbdisk:vfat modules=loop,cramfs,sd-mod,usb-storage quiet waitusb=3

See Also

Alpine Linux has some special applications that helps you to use it in the way you want.
Some of the first scripts you are suggested to use is:

  • setup-alpine (Configures all basic things on your Alpine Linux)
  • setup-acf (was named setup-webconf before Alpine 1.9 beta 4) (Configures ACF (webconfiguration) so you can manage your box through https)
Note: Just type any of the above commands on your console and hit Enter to execute the script.

Other useful pages