Create UEFI boot USB: Difference between revisions

From Alpine Linux
m (Fix up command blocks)
(Update instructions for modern Alpine images which already include grub-efi)
Line 9: Line 9:


Create a single UEFI boot partitions.
Create a single UEFI boot partitions.
{{warning| this will erase all content of your {{Path|/dev/sdX}}. Make sure that you use correct device}}
{{warning| This will erase all content of your {{Path|/dev/sdX}}. Make sure that you use correct device.}}


{{Cmd | parted --script /dev/sdX mklabel gpt
{{Cmd | parted --script /dev/sdX mklabel gpt
  parted --script --align{{=}}optimal /dev/sdX mkpart ESP fat32 1MiB 512MiB
  parted --script --align{{=}}optimal /dev/sdX mkpart ESP fat32 1MiB 100%
  parted --script /dev/sdX set 1 boot on }}
  parted --script /dev/sdX set 1 boot on }}


Line 19: Line 19:
Create a fat32 system with the name `Alpine`.
Create a fat32 system with the name `Alpine`.


{{Cmd | mkfs.vfat -n Alpine /dev/sdX1 }}
{{Cmd | mkfs.vfat -n ALPINE /dev/sdX1 }}


== Copy content of ISO image to filesystem ==
== Copy content of ISO image to filesystem ==
Line 26: Line 26:


{{Cmd | mount -t vfat /dev/sdX1 /mnt
{{Cmd | mount -t vfat /dev/sdX1 /mnt
  cd /mnt && uniso < /path/to/alpine-3.4.0-x86_64.iso }}
  cd /mnt
 
uniso < /path/to/alpine-3.4.0-x86_64.iso }}
== Copy gummiboot efi binary ==
 
{{note| Gummiboot has been forked in Alpine Linux since it has been [https://www.freedesktop.org/wiki/Software/systemd/systemd-boot/ consumed by systemd upstream].}}
 
UEFI will look for a {{Path|EFI/bootx64.efi}} as a fallback efi loader. We copy {{Path|gummibootx64.efi}} to this location.
 
{{Cmd | mkdir -p /mnt/EFI/Boot
apk add gummiboot
cp /usr/lib/gummiboot/gummibootx64.efi /mnt/EFI/Boot/bootx64.efi }}
 
== Create configuration files for boot loader ==
 
We need create some configuration files for gummiboot.
{{Cmd | mkdir -p loader/entries }}
 
{{Cat | loader/loader.conf |default alpine
timeout 4
}}
 
The options are taken from {{Path|boot/syslinux/syslinux.cfg}}
 
{{Cat | loader/entries/alpine.conf |title    Alpine Linux
linux    /boot/vmlinuz-hardened
initrd  /boot/initramfs-hardened
options  modloop{{=}}/boot/modloop-hardened modules{{=}}loop,squashfs,sd-mod,usb-storage quiet
}}


== Unmount the partition ==
Finally umount the disk
Finally umount the disk
{{Cmd | cd ~ && umount /mnt}}
{{Cmd | cd ~ && umount /mnt}}


[[Category:Installation]]
[[Category:Installation]]

Revision as of 13:35, 30 December 2018

This article explains how to create an UEFI boot USB with parted and gummiboot.

In this example we will use /dev/sdX. This will be different depending on your system.

Create GPT boot partition

Install parted

apk add parted

Create a single UEFI boot partitions.

Warning: This will erase all content of your /dev/sdX. Make sure that you use correct device.


parted --script /dev/sdX mklabel gpt parted --script --align=optimal /dev/sdX mkpart ESP fat32 1MiB 100% parted --script /dev/sdX set 1 boot on

Create fat32 filesystem

Create a fat32 system with the name `Alpine`.

mkfs.vfat -n ALPINE /dev/sdX1

Copy content of ISO image to filesystem

It is possible to mount the iso image and copy files with cp or rsync and it is also possible to use 7z to extract content from the iso. In this example I will use the uniso utility from alpine-conf package.

mount -t vfat /dev/sdX1 /mnt cd /mnt uniso < /path/to/alpine-3.4.0-x86_64.iso

Unmount the partition

Finally umount the disk

cd ~ && umount /mnt