Difference between revisions of "Bonding"

From Alpine Linux
Jump to: navigation, search
(Created page with "This article shows how to bond (or aggregate) multiple ethernet interfaces into a bond0 interface. ==Installation== First, install the ''bonding'' package. This will give you su...")
 
Line 7: Line 7:
 
==Configuration==
 
==Configuration==
 
Edit the ''/etc/network/interfaces'' file:
 
Edit the ''/etc/network/interfaces'' file:
{{Cat|
+
<pre>
 
auto bond0
 
auto bond0
 
iface bond0 inet static
 
iface bond0 inet static
Line 15: Line 15:
 
# specify the ethernet interfaces that should be bonded
 
# specify the ethernet interfaces that should be bonded
 
bond-slaves eth0 eth1 eth2 eth3
 
bond-slaves eth0 eth1 eth2 eth3
}}
+
</pre>
  
 
References: http://www.kernel.org/doc/Documentation/networking/bonding.txt
 
References: http://www.kernel.org/doc/Documentation/networking/bonding.txt

Revision as of 14:09, 10 May 2012

This article shows how to bond (or aggregate) multiple ethernet interfaces into a bond0 interface.

Installation

First, install the bonding package. This will give you support for bonding in the /etc/network/interfaces file.

apk add bonding

Configuration

Edit the /etc/network/interfaces file:

auto bond0
iface bond0 inet static
	address 192.168.0.2
	netmask 255.255.255.0
	gateway 192.168.0.1
	# specify the ethernet interfaces that should be bonded
	bond-slaves eth0 eth1 eth2 eth3

References: http://www.kernel.org/doc/Documentation/networking/bonding.txt