Setting Up a bridge - Revision history

Ncopa: Redirect to New Bridge page

2012-08-22T12:31:30Z

Redirect to New Bridge page

← Older revision		Revision as of 12:31, 22 August 2012
Line 1:		Line 1:
	~~{{Merge\|How to configure a network bridge\|See also the discussion of bonding, vlans, and bridges on http://lists.alpinelinux.org/alpine-devel between 9 Mar and 23 Mar 2012}}~~		#REDIRECT [[Bridge]]

	~~apk add bridge-utils~~

	~~vi /etc/network/interfaces~~

	~~auto br0~~
	~~iface br0 inet static~~
	~~pre-up brctl addbr br0~~
	~~pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables~~
	~~pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables~~
	~~pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-ip6tables~~
	~~address 192.168.0.253~~
	~~netmask 255.255.255.0~~
	~~gateway 192.168.0.254~~
	~~post-down brctl delbr br0~~

	~~auto eth0~~
	~~iface eth0 inet manual~~
	~~up ip link set $IFACE up~~
	~~up brctl addif br0 $IFACE~~
	~~down brctl delif br0 $IFACE \|\| true~~
	~~down ip link set $IFACE down~~

	~~auto eth1~~
	~~iface eth1 inet manual~~
	~~up ip link set $IFACE up~~
	~~up brctl addif br0 $IFACE~~
	~~down brctl delif br0 $IFACE \|\| true~~
	~~down ip link set $IFACE down~~
	~~...~~

	~~That way you create br0 with: ifup br0, and you can add/remove~~
	~~individual interfaces to the bridge with ifup eth0, ifdown eth0.~~


	[[~~Category:Networking~~]]

Dubiousjim: Propose merge

2012-03-26T09:22:30Z

Propose merge

← Older revision		Revision as of 09:22, 26 March 2012
Line 1:		Line 1:
			{{Merge\|How to configure a network bridge\|See also the discussion of bonding, vlans, and bridges on http://lists.alpinelinux.org/alpine-devel between 9 Mar and 23 Mar 2012}}

	apk add bridge-utils		apk add bridge-utils

Dubiousjim: Category:Networking

2012-03-12T07:16:28Z

Category:Networking

← Older revision		Revision as of 07:16, 12 March 2012
Line 31:		Line 31:
	That way you create br0 with: ifup br0, and you can add/remove		That way you create br0 with: ifup br0, and you can add/remove
	individual interfaces to the bridge with ifup eth0, ifdown eth0.		individual interfaces to the bridge with ifup eth0, ifdown eth0.


			[[Category:Networking]]

Ph at 12:04, 2 April 2010

2010-04-02T12:04:59Z

← Older revision		Revision as of 12:04, 2 April 2010
Line 1:		Line 1:
			apk add bridge-utils

	vi /etc/network/interfaces		vi /etc/network/interfaces

	auto br0		auto br0
	iface br0 inet static		iface br0 inet static
	pre-up brctl addbr br0		pre-up brctl addbr br0
	pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables		pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables
	pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables		pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables
	pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-ip6tables		pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-ip6tables
	address 192.168.0.253		address 192.168.0.253
	netmask 255.255.255.0		netmask 255.255.255.0
	gateway 192.168.0.254		gateway 192.168.0.254
	post-down brctl delbr br0		post-down brctl delbr br0

	auto eth0		auto eth0
	iface eth0 inet manual		iface eth0 inet manual
	up ip link set $IFACE up		up ip link set $IFACE up
	up brctl addif br0 $IFACE		up brctl addif br0 $IFACE
	down brctl delif br0 $IFACE \|\| true		down brctl delif br0 $IFACE \|\| true
	down ip link set $IFACE down		down ip link set $IFACE down

	auto eth1		auto eth1
	iface eth1 inet manual		iface eth1 inet manual
	up ip link set $IFACE up		up ip link set $IFACE up
	up brctl addif br0 $IFACE		up brctl addif br0 $IFACE
	down brctl delif br0 $IFACE \|\| true		down brctl delif br0 $IFACE \|\| true
	down ip link set $IFACE down		down ip link set $IFACE down
			...
	...





	That way you create br0 with: ifup br0, and you can add/remove		That way you create br0 with: ifup br0, and you can add/remove
	individual interfaces to the bridge with ifup eth0, ifdown eth0.		individual interfaces to the bridge with ifup eth0, ifdown eth0.

Ph: Created page with ' vi /etc/network/interfaces auto br0 iface br0 inet static pre-up brctl addbr br0 pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables pre-up ec...'

2010-04-02T11:58:42Z

Created page with ' vi /etc/network/interfaces auto br0 iface br0 inet static pre-up brctl addbr br0 pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables pre-up ec...'

New page

vi /etc/network/interfaces

auto br0
iface br0 inet static
pre-up brctl addbr br0
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-arptables
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables
pre-up echo 0 > /proc/sys/net/bridge/bridge-nf-call-ip6tables
address 192.168.0.253
netmask 255.255.255.0
gateway 192.168.0.254
post-down brctl delbr br0

auto eth0
iface eth0 inet manual
up ip link set $IFACE up
up brctl addif br0 $IFACE
down brctl delif br0 $IFACE || true
down ip link set $IFACE down

auto eth1
iface eth1 inet manual
up ip link set $IFACE up
up brctl addif br0 $IFACE
down brctl delif br0 $IFACE || true
down ip link set $IFACE down

...

That way you create br0 with: ifup br0, and you can add/remove
individual interfaces to the bridge with ifup eth0, ifdown eth0.