Alpine Linux - User contributions [en]

FreePBX

2021-10-31T12:07:51Z

Artioni81:

This document will be a quick c/p guide to setup asterisk with [http://www.freepbx.org/ FreepPBX] on Alpine Linux. What we will setup is the following:

* Lighttpd with PHP using FastCGI
* MySQL server
* Freepbx 2.7.0

== Install Lighttpd and PHP ==

{{:Setting Up Lighttpd With FastCGI}}

== Install pear DB ==

{{Cmd|apk add php7-pear; pear install DB}}

== MySQL ==

Follow [[MariaDB|MariaDB installation and configuration guide]] to prevent errors during installation. Below is an example of necessary steps, but it won't work before you do following article.

{{Cmd|apk add mysql mysql-client}}

Initiate databases

{{Cmd|<nowiki>/usr/bin/mysql_install_db --user=mysql</nowiki>}}

Start MySQL and add to system start

{{Cmd|/etc/init.d/mariadb start && rc-update add mariadb default}}

Set MySQL root password

{{Cmd|/usr/bin/mysqladmin -u root password 'new-password'}}

== Asterisk ==

Install asterisk (replace vserver with your kernel version).

{{Cmd|apk add asterisk asterisk-sample-config asterisk-dahdi asterisk-cdr-mysql}}

Start asterisk (do not add to system start)

{{Cmd|/etc/init.d/asterisk start}}

== FreePBX ==

Download Freepbx

{{Cmd|wget http://mirror.freepbx.org/freepbx-2.7.0.tar.gz <-- link not available}}

Unpack source

{{Cmd|tar zxvf freepbx-2.7.0.tar.gz && cd freepbx-2.7.0}}

Add freepbx databases to MySQL

{{Cmd|mysqladmin create asterisk -p
mysqladmin create asteriskcdrdb -p}}

Import SQL data into MySQL

{{Cmd|mysql -D asterisk -u root -p < SQL/newinstall.sql
mysql -D asteriskcdrdb -u root -p < SQL/cdr_mysql_table.sql}}

Open connection to MySQL

{{Cmd|mysql -u root -p}}

Create MySQL users

{{Cmd|GRANT ALL PRIVILEGES ON asterisk.* TO asteriskuser@localhost IDENTIFIED BY 'amp109';
GRANT ALL PRIVILEGES ON asteriskcdrdb.* TO asteriskuser@localhost IDENTIFIED BY 'amp109';}}

Close connection

{{Cmd|exit}}

Freepbx installer does not like busybox sed so we add normal sed, we need to patch 2 files later on so we need patch (you can remove them afterwards)

{{Cmd|apk add sed patch}}

Flash operator panel needs Perl

{{Cmd|apk add perl}}

Start the installer (you can accept the defaults)

{{Cmd|./install_amp}}

== Finishing up ==

Change user/group of lighttpd to asterisk

{{Cmd|vim +50 /etc/lighttpd/lighttpd.conf}}

Change permissions of lighttpd/freepbx files

{{Cmd|/etc/init.d/lighttpd stop
chown -R asterisk:asterisk /var/log/lighttpd
chown -R asterisk:asterisk /var/run/lighttpd*
chown -R asterisk:asterisk /var/www/localhost/htdocs/freepbx
/etc/init.d/lighttpd start}}

Stop asterisk

{{Cmd|/etc/init.d/asterisk stop}}

Patch FreePBX to support Alpine Linux
[[File:Freepbx_engine.patch.txt]]

{{Cmd|cd /var/lib/asterisk/bin
patch -p0 < freepbx_engine.patch}}

This file gets overwritten when using freepbx so we need to patch the original
[[File:Freepbx_engine.patch.txt]]

{{Cmd|cd /var/www/localhost/htdocs/freepbx/admin/modules/framework/bin/
patch -p0 freepbx_engine.patch}}

Start Asterisk with FreePBX

{{Cmd|amportal start}}

Load needed dahdi modules

{{Cmd|modprobe dahdi
modprobe dahdi_dummy}}

Make them load on boot

{{Cmd|echo dahdi >> /etc/modules
echo dahdi_dummy >> /etc/modules}}

[[Category:Telephony]]
[[Category:Server]]
[[Category:PHP]]
[[Category:SQL]]

FreePBX

2021-10-31T12:07:28Z

Artioni81:

This document will be a quick c/p guide to setup asterisk with [http://www.freepbx.org/ FreepPBX] on Alpine Linux. What we will setup is the following:

* Lighttpd with PHP using FastCGI
* MySQL server
* Freepbx 2.7.0

== Install Lighttpd and PHP ==

{{:Setting Up Lighttpd With FastCGI}}

== Install pear DB ==

{{Cmd|apk add php7-pear; pear install DB}}

== MySQL ==

Follow [[MariaDB|MariaDB installation and configuration guide]] to prevent errors during installation. Below is an example of necessary steps, but it won't work before you do following article.

{{Cmd|apk add mysql mysql-client}}

Initiate databases

{{Cmd|<nowiki>/usr/bin/mysql_install_db --user=mysql</nowiki>}}

Start MySQL and add to system start

{{Cmd|/etc/init.d/mariadb start && rc-update add mariadb default}}

Set MySQL root password

{{Cmd|/usr/bin/mysqladmin -u root password 'new-password'}}

== Asterisk ==

Install asterisk (replace vserver with your kernel version).

{{Cmd|apk add asterisk asterisk-sample-config asterisk-dahdi asterisk-cdr-mysql}}

Start asterisk (do not add to system start)

{{Cmd|/etc/init.d/asterisk start}}

== FreePBX ==

Download Freepbx

{{Cmd|wget http://mirror.freepbx.org/freepbx-2.7.0.tar.gz <-- link non available}}

Unpack source

{{Cmd|tar zxvf freepbx-2.7.0.tar.gz && cd freepbx-2.7.0}}

Add freepbx databases to MySQL

{{Cmd|mysqladmin create asterisk -p
mysqladmin create asteriskcdrdb -p}}

Import SQL data into MySQL

{{Cmd|mysql -D asterisk -u root -p < SQL/newinstall.sql
mysql -D asteriskcdrdb -u root -p < SQL/cdr_mysql_table.sql}}

Open connection to MySQL

{{Cmd|mysql -u root -p}}

Create MySQL users

{{Cmd|GRANT ALL PRIVILEGES ON asterisk.* TO asteriskuser@localhost IDENTIFIED BY 'amp109';
GRANT ALL PRIVILEGES ON asteriskcdrdb.* TO asteriskuser@localhost IDENTIFIED BY 'amp109';}}

Close connection

{{Cmd|exit}}

Freepbx installer does not like busybox sed so we add normal sed, we need to patch 2 files later on so we need patch (you can remove them afterwards)

{{Cmd|apk add sed patch}}

Flash operator panel needs Perl

{{Cmd|apk add perl}}

Start the installer (you can accept the defaults)

{{Cmd|./install_amp}}

== Finishing up ==

Change user/group of lighttpd to asterisk

{{Cmd|vim +50 /etc/lighttpd/lighttpd.conf}}

Change permissions of lighttpd/freepbx files

{{Cmd|/etc/init.d/lighttpd stop
chown -R asterisk:asterisk /var/log/lighttpd
chown -R asterisk:asterisk /var/run/lighttpd*
chown -R asterisk:asterisk /var/www/localhost/htdocs/freepbx
/etc/init.d/lighttpd start}}

Stop asterisk

{{Cmd|/etc/init.d/asterisk stop}}

Patch FreePBX to support Alpine Linux
[[File:Freepbx_engine.patch.txt]]

{{Cmd|cd /var/lib/asterisk/bin
patch -p0 < freepbx_engine.patch}}

This file gets overwritten when using freepbx so we need to patch the original
[[File:Freepbx_engine.patch.txt]]

{{Cmd|cd /var/www/localhost/htdocs/freepbx/admin/modules/framework/bin/
patch -p0 freepbx_engine.patch}}

Start Asterisk with FreePBX

{{Cmd|amportal start}}

Load needed dahdi modules

{{Cmd|modprobe dahdi
modprobe dahdi_dummy}}

Make them load on boot

{{Cmd|echo dahdi >> /etc/modules
echo dahdi_dummy >> /etc/modules}}

[[Category:Telephony]]
[[Category:Server]]
[[Category:PHP]]
[[Category:SQL]]

FreePBX

2021-10-31T12:06:56Z

Artioni81: FreeBPX download link non available

This document will be a quick c/p guide to setup asterisk with [http://www.freepbx.org/ FreepPBX] on Alpine Linux. What we will setup is the following:

* Lighttpd with PHP using FastCGI
* MySQL server
* Freepbx 2.7.0

== Install Lighttpd and PHP ==

{{:Setting Up Lighttpd With FastCGI}}

== Install pear DB ==

{{Cmd|apk add php7-pear; pear install DB}}

== MySQL ==

Follow [[MariaDB|MariaDB installation and configuration guide]] to prevent errors during installation. Below is an example of necessary steps, but it won't work before you do following article.

{{Cmd|apk add mysql mysql-client}}

Initiate databases

{{Cmd|<nowiki>/usr/bin/mysql_install_db --user=mysql</nowiki>}}

Start MySQL and add to system start

{{Cmd|/etc/init.d/mariadb start && rc-update add mariadb default}}

Set MySQL root password

{{Cmd|/usr/bin/mysqladmin -u root password 'new-password'}}

== Asterisk ==

Install asterisk (replace vserver with your kernel version).

{{Cmd|apk add asterisk asterisk-sample-config asterisk-dahdi asterisk-cdr-mysql}}

Start asterisk (do not add to system start)

{{Cmd|/etc/init.d/asterisk start}}

== FreePBX ==

Download Freepbx

{{Cmd|wget http://mirror.freepbx.org/freepbx-2.7.0.tar.gz}} <-- link non available

Unpack source

{{Cmd|tar zxvf freepbx-2.7.0.tar.gz && cd freepbx-2.7.0}}

Add freepbx databases to MySQL

{{Cmd|mysqladmin create asterisk -p
mysqladmin create asteriskcdrdb -p}}

Import SQL data into MySQL

{{Cmd|mysql -D asterisk -u root -p < SQL/newinstall.sql
mysql -D asteriskcdrdb -u root -p < SQL/cdr_mysql_table.sql}}

Open connection to MySQL

{{Cmd|mysql -u root -p}}

Create MySQL users

{{Cmd|GRANT ALL PRIVILEGES ON asterisk.* TO asteriskuser@localhost IDENTIFIED BY 'amp109';
GRANT ALL PRIVILEGES ON asteriskcdrdb.* TO asteriskuser@localhost IDENTIFIED BY 'amp109';}}

Close connection

{{Cmd|exit}}

Freepbx installer does not like busybox sed so we add normal sed, we need to patch 2 files later on so we need patch (you can remove them afterwards)

{{Cmd|apk add sed patch}}

Flash operator panel needs Perl

{{Cmd|apk add perl}}

Start the installer (you can accept the defaults)

{{Cmd|./install_amp}}

== Finishing up ==

Change user/group of lighttpd to asterisk

{{Cmd|vim +50 /etc/lighttpd/lighttpd.conf}}

Change permissions of lighttpd/freepbx files

{{Cmd|/etc/init.d/lighttpd stop
chown -R asterisk:asterisk /var/log/lighttpd
chown -R asterisk:asterisk /var/run/lighttpd*
chown -R asterisk:asterisk /var/www/localhost/htdocs/freepbx
/etc/init.d/lighttpd start}}

Stop asterisk

{{Cmd|/etc/init.d/asterisk stop}}

Patch FreePBX to support Alpine Linux
[[File:Freepbx_engine.patch.txt]]

{{Cmd|cd /var/lib/asterisk/bin
patch -p0 < freepbx_engine.patch}}

This file gets overwritten when using freepbx so we need to patch the original
[[File:Freepbx_engine.patch.txt]]

{{Cmd|cd /var/www/localhost/htdocs/freepbx/admin/modules/framework/bin/
patch -p0 freepbx_engine.patch}}

Start Asterisk with FreePBX

{{Cmd|amportal start}}

Load needed dahdi modules

{{Cmd|modprobe dahdi
modprobe dahdi_dummy}}

Make them load on boot

{{Cmd|echo dahdi >> /etc/modules
echo dahdi_dummy >> /etc/modules}}

[[Category:Telephony]]
[[Category:Server]]
[[Category:PHP]]
[[Category:SQL]]

Setting Up Lighttpd With FastCGI

2021-10-31T12:03:58Z

Artioni81: added php7-simplexml

For installing the additional packages first activate community packages:
{{Cmd|vi /etc/apk/repositories}}
Uncomment the following:
{{Cmd|http://pkg.example.com/alpine/v3.11/community}}

Update the packagelist:
{{Cmd|apk update}}

Install the additional packages:
{{Cmd|apk add lighttpd php7-common php7-session php7-iconv php7-json php7-gd php7-curl php7-xml php7-mysqli php7-imap php7-cgi fcgi php7-pdo php7-pdo_mysql php7-soap php7-xmlrpc php7-posix php7-mcrypt php7-gettext php7-ldap php7-ctype php7-dom php7-simplexml}}

==Configure Lighttpd==
'''Edit lighttpd.conf'''
{{Cmd|vi /etc/lighttpd/lighttpd.conf}}
Uncomment line:
include "mod_fastcgi.conf"

==Start lighttpd service and add to needed runlevel==

{{Cmd|rc-service lighttpd start && rc-update add lighttpd default}}

[[Category:Server]]
[[Category:PHP]]